Shokz OpenComm C102 Manual

HOW IT WORKS

Headset Controls

ON/OFF

Turn on the headset:
Press and hold the Power/Volume + Button until the LED Indicator flashes blue.
*Audrey will say: " Welcome to Shokz"
Turn off the headset:
Press and hold the Power/Volume + Button until the LED Indicator flashes red.
*Audrey will say: " Power off" 。

Pairing

NFC Pairing

Operate controls with headset powered off.

1. Power on your headset (press and hold Power/Volume+ until LED Indicator flashes blue)
   
   
2. Unlock your phone and turn on NFC pairing (Refer to your phone's user guide if needed).
3. Position the headset's NFC logo near the NFC detection area of your phone until the device shows pairing is completed. The headset's LED Indicator will flash blue once when pairing is successful.

How to Wear

Pick up the headset, bring them behind the back of the base of your neck, position the earhooks on your ears.
*Position the noise-canceling microphone close to your mouth.
*Wearing your headset the wrong way could cause discomfort. The transducers should rest in front of your ears.

Volume

Operate volume controls while audio is playing.

How to change volume:
While your audio is playing, adjust headset volume by pushing either the Volume + or Volume ‒ buttons.
*A" beep" will sound when the volume is at its max.
*Listening with headset at high volume may affect your hearing and the audio will be distorted.

Mute the Microphone

To Turn Mute On
Press and hold the Volume + and Volume - buttons while on a call until Audrey says "Mute on".
To Turn Mute Off
Press and hold the Volume + and Volume - buttons while the microphone is muted until Audrey says "Mute off".

Multifunction Button

	Play/pause music Click once
	Next song Double-click while music is playing
	Previous song Triple-click while music is playing
	Answer call Click once
	End call Click once

MULTIFUNCTION BUTTON

*Only applicable for phone calls, not online calls

Check Battery Status

Operate controls while audio is not playing

How to check battery status:
Click the Volume + or Volume - button while music is paused, Audrey will tell you the battery status:
* "Battery high/Battery medium/Battery low/Charge me"

Extra Features

EQ Modes

Standard Mode:
Standard listening mode with your ears open.

Earplug Mode:
Use earplugs with headset in noisy environments where it is safe to block out ambient noise, such as on a train or in a factory plant.

Switching EQ Modes

Operate controls while music is playing

How to switch EQ mode:
Press and hold both buttons( Power/Volume + Button and Volume - Button)while music is playing until you hear a beep.
*Audrey will say:"EQ changed"

Operate controls with headset powered off

1. Start with your headset powered off.
2. Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
   
   
3. Press and hold the multifunction button and Volume + button until Audrey says "multipoint enabled."
   
   
4. Open first device's Bluetooth® menu and select "OpenComm by Shokz."Audrey will say "connected".
5. Turn your headset off.
   
   
6. Re-enter pairing mode by pressing and holding Volume + until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
7. Open second device's Bluetooth® menu and select "OpenComm by Shokz."Audrey will say "connected."
8. Turn your headset off.
   
   (You will hear a beep, then Audrey will say "Welcome to Shokz, connected. Second device connected.")
9. Turn your headset on. Your headset is now connected to both devices.

Turn Multipoint Pairing Off

Operate controls with headset powered off.

Restore Factory Settings

Operate controls with headset powered off.

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese and Korean.
Follow the instruction when headset powered off

Care and Maintenance

Charging Tips

When the headset is at low battery, there will be a" charge me" prompt and the red light will flash intermittently. Use the corresponding magnetic charging cable for charging.
The LED indicator will turn red during the charging process and the headset will automatically turn off. The LED indicator will turn from red to blue when charging is complete.

Moisture Detection Alert

How it Works:
These headset can detect liquid such as water, sweat, or rain. If the headset this plugged into the charger while wet, the LED indicator will flash red and blue. The headset will then emit a beep. If this happens, remove the charging cable, dry them completely, then proceed with charging.

Storage and Maintenance

• Store the headset in a cool, dry place. The working temperature should be 0~45°C(32~113°F). Working in a cold/hot environment, a highly humid area, or an extremely low air pressure may reduce the battery life.
• Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.
• Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
• This headset is water-resistant, but is not waterproof. Please do not submerse the headset in water.
• Clean the headset with a soft dry cloth.
• Do not charge right after exercising, in case there's sweat inside the charging port, which could lead to circuit burning while charging.
• After storage for a long period, please charge the headset before using again.

Note
Design and specification are subject to change without notice. For the most up-to-date product information, please visit https://shokz.com.

To avoid the risk of explosion, fire, or leakage from toxic chemicals, please do not disassemble the product or replace, deform, or mutilate the battery.