Table of Contents
Advertisement
Huskvarna, 2018-03-12
Safety and Operating Instructions
Dear customer,
thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it.
Please note that the enclosed manual contains Atlas Copco references.
The Husqvarna Group is vouching for the quality of this product.
If you have any questions, please do not hesitate to contact Discount-equipment.
Advertisement
Table of Contents
Related Manuals for Atlas Copco LT 6005
Summary of Contents for Atlas Copco LT 6005
- Page 1 Dear customer, thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it. Please note that the enclosed manual contains Atlas Copco references. The Husqvarna Group is vouching for the quality of this product. If you have any questions, please do not hesitate to contact Discount-equipment.
- Page 2 We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic, Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti, Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.
- Page 3 6005 Safety and operating instructions Rammer © 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26 Original instructions...
-
Page 4: Table Of Contents
LT 6005 Contents Contents Introduction............... . 5 About the Safety and operating instructions. - Page 5 Contents LT 6005 Checking the spark plug............22 Every 500 hours of operation (yearly).
-
Page 6: Introduction
Safety and operating instructions Introduction Thank you for choosing a product from Atlas Copco. Since 1873, we have been committed to finding new and better ways of fulfilling our customers' needs. Through the years, we have developed innovative and ergonomic product designs that have helped customers improve and rationalize their daily work. -
Page 7: Safety Instructions
Safety and operating instructions LT 6005 Appropriate work overall or similar clothing (not ● Safety instructions loose-fitting) that covers your arms and legs. To reduce the risk of serious injury or death to Drugs, alcohol or medication yourself or others, read and understand the Safety... - Page 8 LT 6005 Safety and operating instructions Release the filler cap slowly to let pressure ► WARNING Dust and fume hazard escape. Dusts and/or fumes generated or dispersed when using the machine may cause serious and permanent ► Never overfill the fuel tank.
- Page 9 Safety and operating instructions LT 6005 Avoid eating, drinking, and using tobacco products ► WARNING Motion hazards in areas where there is dust or fumes. When using the machine to perform work-related activities, you may experience discomfort in the ►...
-
Page 10: Transport, Precautions
LT 6005 Safety and operating instructions Make sure that the rammer shoe is Make sure that there is no danger before ► ► well-maintained , not worn out, and of the proper continuing. size. Rammer shoes that are not well-maintained,... -
Page 11: Maintenance, Precautions
► Never modify the machine. Modified machines are not covered by warranty or product liability. ► Always use original parts and accessories approved by Atlas Copco. Change damaged parts immediately. ► ► Replace worn components in good time. CAUTION High temperature The machine's engine exhaust pipe, and bottom become hot during operation. -
Page 12: Overview
LT 6005 Safety and operating instructions Overview Main parts To reduce the risk of serious injury or death to yourself or others, read the Safety instructions section found on the previous pages of this manual before operating the machine. Design and function LT rammers are designed for the compaction of fill, including fill that contains clay. -
Page 13: Labels
Safety and operating instructions LT 6005 Engine oil dip stick Engine oil plug Bellow Spring-loaded leg oil, sight glass Working mode position Throttle control fully opened Fuel tap fully opened Primer pump Engine switch in position ON Fuel filter Start/Idling speed position... -
Page 14: Data Plate
LT 6005 Safety and operating instructions Data plate Construction Tools EOOD Type XXXX Ser.No. XXXX Deliv. wt. XXXX p max XXXX Made in XXXX, Year XXXX Machine type Maximum hydraulic pressure Serial number The warning symbol together with the book... -
Page 15: Warning Label - Hot Surfaces
Safety and operating instructions LT 6005 Warning label - Hot surfaces Air filter indicator label Read the instruction manual. Start label on fuel tank Never touch the silencer and exhaust system. Lifting point label Read the instruction manual. Safety label, read the instruction manual Set the throttle, engine switch, and fuel tap control to start mode. -
Page 16: Engine Choke And Primer Pump Label
LT 6005 Safety and operating instructions Start label Transport WARNING Transport During transportation the machine can overturn and cause serious injury. Always strap the machine down. ► ► Keep your feet away from the machine. 1. Set the throttle, engine switch, and fuel tap control in stop mode (A). -
Page 17: Lifting
Safety and operating instructions LT 6005 4. When moving short distances, the machine can Operation be tilted forward, so that it rests on the plastic wheels on the handle. Lift with the lower lifting WARNING Involuntary start handle (D) and roll the machine forwards and Involuntary start of the machine may cause injury. -
Page 18: Starting The Engine
LT 6005 Safety and operating instructions Starting the engine 1. Set the throttle, engine switch and fuel tap control (A) in starting mode. 2. Pump at least five times on the primer pump (B) if the engine is cold. Working mode position... -
Page 19: Start Label
Safety and operating instructions LT 6005 4. Pull out the starter rope (D) until it resists. NOTICE When operating in narrow trenches, there Release the handle so the starter rope goes back is a risk of the rammer leg fastening between the again, and then pull the starter rope until the trench walls. -
Page 20: Start Label On Fuel Tank
LT 6005 Safety and operating instructions Operating Start label on fuel tank 1. Set the throttle, engine switch and fuel tap control (A) in working mode, and the rammer will start to move forward. Read the instruction manual. Set the throttle, engine switch, and fuel tap 2. -
Page 21: Cleaning The Machine
Safety and operating instructions LT 6005 Before starting maintenance on the machine, clean Check the oil level in the spring-loaded leg. ♦ ♦ it in order to avoid exposure to hazardous Check the air filter indicator. ♦ substances. See “Dust and fume hazard”. -
Page 22: Checking The Oil Level In The Spring-Loaded Leg
LT 6005 Safety and operating instructions Checking the oil level in the spring-loaded Checking bolted joint Check and if necessary tighten screws and nuts. Check the oil level in the spring-loaded leg through the sight glass (A). After the first 20 hours of... -
Page 23: Changing The Engine Oil
Safety and operating instructions LT 6005 5. Refit the sight glass and tighten. The oil level Changing the engine oil must be at the middle of the sight glass. Every 100 hours of operation (weekly) Maintenance routines: ♦ Replace air filter. -
Page 24: Checking The Hood Knob
LT 6005 Safety and operating instructions Replace the air filter or check the air filter indicator. ♦ Checking the hood knob Check that the hood knob (A) is in good condition. Disposal A used machine must be treated and disposed of in... -
Page 25: Technical Data
Safety and operating instructions LT 6005 Technical data Machine data LT 6005 Rammer leg width 230 mm (9 in.) Rammer leg width 280 mm (11 in.) Engine Manufacture/Model Honda GXR 120, 4-stroke, manual start Honda GXR 120, 4-stroke, manual start Power kW (hp) 2.6 (3.48) -
Page 26: Noise And Vibration Data
LT 6005 Safety and operating instructions Noise and vibration data Noise Vibration Declared values Declared values Sound pressure Sound power Three axes values EN ISO 11201 2000/14/EC EN 500-4 permitted at operator's guaranteed measured dB(A) working value Type dB(A) rel 1pW... -
Page 27: Dimensions
Safety and operating instructions LT 6005 Dimensions mm (in.) *Contact area, m (sq feet). 0.053 (0.57)*/ 230 (9)/ 0.065 (0.70)* 280 (11) 330 (13) 345 (13.6) 726 (28.6) © 2015 Construction Tools EOOD | No. 9800 1415 01b | 2015-05-26... -
Page 28: Ec Declaration Of Conformity
We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic, Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti, Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.
Need help?
Do you have a question about the LT 6005 and is the answer not in the manual?
Questions and answers