NOTE:
FIGURE 4-5
Part No.: 4417584_Rev12
Commissioning of a Standalone System Setup
4.2.2 Verifying the CIU 888 license
When the initial password is changed, verify if a license is installed on
the CIU 888 and if it supports the functionality ordered.
Firmware Upgrade Manual (Part No. 4417596) for more information about the
CIU 888 license.
Perform the following procedure:
1. In the CIU 888 Web interface, click CONFIGURE in the section
menu bar.
The CONFIGURE window is displayed (see FIGURE 4-5).
CIU 888 Web interface: Configure window
2. If a license is installed on the CIU 888, 'LICENSE_OK' is displayed in
the License status field. If no license is installed, the field is empty. In
this case, contact Honeywell.
Configuration Manual
CIU 888
Refer to the
4 - 4