Eclipse POWERSHADE Programming Instructions

SWITCHING MOTOR ON/OFF:

To switch off:
1. Press and hold the Set button on the motor until the red light
flashes 3 times
(please note motor will jog after approx. 2s while
holding the set button)
To switch on:
1. Press the Set button on the motor until the red light flashes,
motor is now switched on

SETTING MULTIPLE BLINDS ON ONE CHANNEL:

If blinds have been pre-programmed already follow these steps:
1. Select the desired channel on the remote
2. Press the set button on the motor until the motor jogs
3. Press the up button on the remote, motor will jog
4. Repeat steps 2 & 3 for all other blinds to be set on this channel
(Please note: blinds already set on this channel may react to the press of
the up button during step 3)
If blinds are being programmed for the first time
follow these steps:
1. Using instructions above switch off all motors that are to
be programmed on the same channel,
leave just one motor to be programmed switched on
2. Select the desired channel on the remote
3. Follow basic programming instructions for linking remote,
checking direction & setting limits
4. On completion of programming, switch blind off as per
INITIAL SET UP
instruction above
1. To start you will need an installed motorised blind, remote
5. Switch on next blind to be set on this channel
control and push pin/paperclip/pen.
6. Repeat steps 3-5, repeat this process for all other blinds
to be set on this channel
2. Make sure when fitting the blind into the brackets that the
(Please note: Once all blinds have been individually programmed
SET button & charge port are facing downwards.
ensure that all motors are switched back on)
SWITCHING BETWEEN DOT MOVEMENT AND CONTINUOUS
MOVEMENT:
1. Press the Set button on the motor until the motor jogs once
2. Press the stop button on the remote, the motor will jog once
3. Switch between Dot & Continuous movement is complete
, motor is now switched off
- Up

ADVANCED PROGRAMMING INSTRUCTIONS

PROGRAMMING INSTRUCTIONS
Single
Channel
SET BUTTON
Up
Stop
Down
Channel
Selection
Six Sixteen
Channel Channel
1