Advertisement
To play audio from a Bluetooth device, you need to pair the device with the speaker. You can pair up to eight devices.
Note: If pairing times out (the Bluetooth status light stops blinking red and blue), press and hold the Pair or Phone button until the Bluetooth status light blinks red and blue again. Repeat step 3.
Press and hold the Pair or Phone button until the Bluetooth status light blinks red and blue. Repeat steps 1 and 3 above.
About once a month, fully charge the speaker (about 4 hours).
Note: You can also use a computer (with the power on) for charging. Plug the charging cable into the USB port.
Status indicator:
Blinking blue = Charging
Solid blue = Fully charged
Solid red = Low battery
Blinking red = Very low battery
The speaker enters power saving mode if no audio is played for 30 minutes. Slide the power switch off and then on to wake the speaker.
For online help, go to www.logitech.com/support/miniboombox
What do you think?
Please take a minute to tell us. Thank you for purchasing our product.
www.logitech.com/ithink
www.logitech.com/support
www.logitech.com/support/miniboombox
United States +1 646-454-3200
Canada +1 866-934-5644
www.logitech.com
© 2011 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Mini Boombox and is the answer not in the manual?
Questions and answers