System Settings - Kenwood DMX7022S Instruction Manual

Settings Settings

System settings

1 Display the <System> screen.
On the source/option selection screen (page 11):
Then, on the <SET-UP> screen, touch as follows:
[System] (1) → [Enter] for the item you adjust or
the appropriate setting for the item (2).
SET-UP
Language
Audio English (UK)
Clock
Display
Enter
Input Time Format Enter
Time Zone
System Enter
Clock Adjust
Enter
2
Adjust the item if more steps are required.
See the respective explanation that follows.
<Language>
Select the text language used for on-screen
information. For details, see page 4.
"Please Ignition Off" appears when the setting is
changed. Turn the ignition switch off then on to
enable the change.
<Clock>
Set the date and clock adjustment method. For details,
see page 5.
38 ENGLISH
<Time Format>
Select the time display format—either [12-Hour]
(Initial) or [24-Hour].
<Time Zone>
Select the time zone for your residential area. For
details, see page 5.
<Clock Adjust>
Adjust the date and clock manually. For details, see
page 5.
<Daylight Saving Time>
(Not used when the clock is set manually)
Activate this by selecting the additional time for
Daylight Saving Time (if available in your residential
area). For details, see page 5.
<Connections SETUP>
Specify or confirm the connected devices information.
<Device List>
Shows the list of the connected (registered) devices.
For details, see page .
<PIN Code>
Shows the current PIN code for this unit.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
<Device Name>
Shows the device name of this unit—DMX7022S.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialise>
Touch and hold [Enter] to reset all settings you
have made for using Bluetooth mobile phones and
Bluetooth audio players.
<TEL SET-UP>
Configure settings for using Bluetooth mobile phones.
For details, see page 28.
• This setting is available only when iPhone with Apple
CarPlay is not connected.
<Device Audio Control>
Adjust the device sounds. For details, see page 11.
<Driving Position>
Set your driver's seat position of your car — [LEFT] or
[RIGHT] (initial).
This setting changes the sidebar/button position of
Apple CarPlay/Android Auto screens accordingly with
the driver seat position.
• This setting is available only when iPhone with Apple
CarPlay and Android device with Android Auto are
not connected.
<Android Mode Select>>
Select your Android usage — either [Android Auto]
(initial) or [Mirroring for Android].
• This setting is available only in Standby Mode with
no device connected via USB.
<Beep>
This setting is available only when 2-way speaker
system is selected (page 31).
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.