Starting The Fastmile 5G Gateway 2 - Nokia FastMile 2 User Manual

Setting up the FastMile 5G Gateway 2
Note: Ensure that no cables are blocking the air flow on the underneath of the FastMile 5G
Gateway 2 to avoid overheating.
Connect the other end of the power adapter into an electrical outlet.

Starting the FastMile 5G Gateway 2

After the FastMile 5G Gateway 2 is connected to power, start the device by pressing
the power on/off button located on the back of the unit.
Figure 10
The LED on the front of the gateway will soon turn on and start blinking yellow to
indicate that the device is booting up. The LED is a multi-color LED that indicates
device status as well as signal strength.
When the booting-up phase is completed, the LED turns red to indicate the signal
search procedure. The FastMile 5G Gateway 2 starts searching for the best 5G
connectivity.
20
Location of the power on/off button
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
User Guide
3TG-02464-AAAA-TCZZA-01