Table of Contents
Advertisement
Quick Links
230V 7KG
SDS MAX ROTARY
HAMMER DRILL
56407
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper 56407
Summary of Contents for Draper 56407
- Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Title Page 1.1 Introduction
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
NOTES CONTENTS TITLE PAGE INTRODUCTION ......................2 REVISION HISTORY ...................... 2 UNDERSTANDING THIS MANUAL ................2 COPYRIGHT NOTICE..................... 2 CONTENTS CONTENTS........................3 GUARANTEE GUARANTEE ........................4 INTRODUCTION SCOPE ........................... 5 SPECIFICATION ......................5 HANDLING & STORAGE ....................5 HEALTH & SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS ................ -
Page 4: Guarantee 3.1 Guarantee
Draper warranty repair agent. Draper Tools Limited takes pride in the quality of its products and the services offered to our valued customers. As a result we offer a free, 3 year extended warranty for this product. -
Page 5: Introduction
In all circumstances: 4.2 SPECIFICATION ● Do not dispose of power tools with domestic waste. ● Do not incinerate. Stock no..........................56407 ● Do not dispose of WEEE* as unsorted municipal waste. Part no....................... SDSMAXHD1600E Rated voltage ........................ 230V~50Hz Rated input .......................... -
Page 6: Health & Safety Information
HEALTH AND SAFETY INFORMATION When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE Warning! ●... -
Page 7: Specific Safety Instructions For Hammer Drills
Have this tool repaired by a qualified person. This tool is designed to conform to the relevant For a full range of optional accessories, please refer to your local Draper Stockist. international and local standards and as such should be maintained and repaired by someone qualified, using only original parts supplied by the manufacturer. -
Page 8: Residual Risk
HEALTH AND SAFETY INFORMATION ● Do not touch the drill bit or areas close to the drill bit immediately after use; they can still be extremely hot, causing burns. – Be sure the drill bit is securely in place before using the drill. –... -
Page 9: Technical Description
TECHNICAL DESCRIPTION 6.1 IDENTIFICATION (1) Auxiliary handle. (2) SDS MAX chuck. (3) Rotary/hammer selector. (4) Gearbox access cover. (5) On/Off trigger switch. (6) Hand grip. (7) Power ON indicator. (8) Plug & cable. - 9 -... -
Page 10: Unpacking & Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product. -
Page 11: Preparing The Drill
PREPARING THE DRILL Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. (2.1) 8.1 AUXILIARY HANDLE – FIG. 1 Warning! Use auxiliary handle supplied with the tool. Loss of control can cause personal injury. When fitting the auxiliary handle (1): –... -
Page 12: Basic Hammer Drill Operations
BASIC HAMMER DRILL OPERATIONS Warning! Prior to beginning any drilling, carefully check the surface for the presence of electric cable, gas or water pipes and other dangerous or damaging contents. If unsure do not proceed. Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. -
Page 13: Pneumatic Hammer Drilling
BASIC HAMMER DRILL OPERATIONS 9.2 PNEUMATIC HAMMER DRILLING – FIG. 5 With the drill at standstill: – Position the rotary/ hammer selection dial (7) to the right. This set-up is for masonry drilling i.e. into brick, concrete, block work, etc. 9.3 PNEUMATIC CHISELLING –... -
Page 14: Sds Max System
9.8 DRILLING WOOD, PLASTIC OR METAL Although technically possible, Draper do not recommend the use of this machine for drilling into wood, metal or plastic. This machine is designed for drilling through brick and concrete and is... -
Page 15: Maintenance
The hammer drill does not require any special maintenance. Regularly clean/vacuum the ventilation slots. Use only a mild cleaner and a damp cloth to clean the tool. 10.2 OPTIONAL ACCESSORIES For a full range of optional accessories, please refer to your local Draper Stockist. - 15 -... -
Page 16: Troubleshooting
11. TROUBLESHOOTING 11.1 TROUBLESHOOTING GUIDE Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance. Problem Possible Cause Remedy 1. Fuse. 1. Replace/reset 13 amp time Motor does not start. delay fuse or circuit breaker. 2. Brushes worn. 2. -
Page 17: Disposal
12. DISPOSAL 12.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: ●... -
Page 18: Explanation Of Symbols
13. EXPLANATION OF SYMBOLS 13.1 EXPLANATION OF SYMBOLS Class II construction Read the instruction manual. (Double insulated). WEEE – Waste Electrical & Wear face mask and safety Electronic Equipment. glasses. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. - Page 19 NOTES - 19 -...
- Page 20 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the 56407 and is the answer not in the manual?
Questions and answers