Functions Overview - Kenwood NX-1800HNU User Manual

Following is a brief overview of the functions available on the transceiver
accessible using the Menu and/ or programmable to the transceiver buttons.
• For details on functions that are not included in "FUNCTIONS OVERVIEW"
and "FUNCTION DESCRIPTIONS"
None [Analog/ NXDN/ DMR]
No function has been programmed.
2-tone [Analog]
2-tone Signaling opens the squelch only when your transceiver receives a call
containing a matching 2-tone signal.
1 PF Button:
Press the programmed button to enter 2-tone Mode.
Menu Mode:
Select "2-TONE" and press the [ S ] button to enter 2-tone Mode.
2 Press the [ <B ] and [ C> ] buttons to select your desired list of 2-tone codes.
3 Press the PTT switch or [
If 2-tone is sent by pressing [
•
returns to Receive mode after transmitting 2-tone.
Autodial [Analog]
Allows you to quickly send DTMF codes from the Autodial List.
1 PF Button:
Press the programmed button to enter Autodial Mode.
Menu Mode:
Select "AUTODIAL" and press the [ S ] button to enter Autodial Mode.
2 Press the [ <B ] and [ C> ] buttons to select your desired list of Autodial.
3 Press the PTT switch or [

FUNCTIONS OVERVIEW

{page
] button to make the call.
] button, the transceiver immediately
] button to make the call.
26
70}, please consult your dealer.