Advertisement
Advertisement
Table of Contents
Related Manuals for NHT Classic Absolute Zero
Summary of Contents for NHT Classic Absolute Zero
- Page 1 Setup Guide Classic Absolute Zero Loudspeakers rev 906...
-
Page 2: Unpacking Your Speakers
Both are 2-way, acoustic suspension systems and are compact enough to hang on walls, be placed on shelves or put on stands. As a note, NHT no longer sells speaker stands, but your authorized dealer can help you find a stand for your specific requirements. - Page 3 20 threaded inserts located underneath a 3/8” hole. The threaded inserts are used to mount a speaker bracket. NHT recommends that you use OmniMount brackets - please ask your authorized NHT dealer or you can visit OmniMounts web site at www.omnimount.com or call their toll-free number at 1-800-668-6848.
- Page 4 For surround systems, use the same basic setup - all shown in (Fig. 3) - and when possible: Fig. 3 Place the center channel speaker right above or below the TV. Place the rear speakers in an equilateral triangle with the listening position, at least 5' apart.
- Page 5 Note that these terminals should be tightened only by hand, as excess force can break them. We recommend your speaker wire be at least 16 gauge. Your NHT dealer can recommend the correct wire. Use the same length of wire for each channel.
-
Page 6: Limited Warranty
For a period of 5 years for parts and 5 years for labor (1 year parts and 90 days labor for electronics) from the date this product is first purchased from an authorized NHT dealer, Now Hear This (NHT) warrants that if it fails...
Need help?
Do you have a question about the Classic Absolute Zero and is the answer not in the manual?
Questions and answers