Product Usage - KitchenAid 5KSMSCA Owner's Manual

PRODUCT ASSEMBLY (CONTINUED)
ATTACHING THE VEGETABLE SHEET CUTTER ATTACHMENT TO
THE STAND MIXER
1.
Turn the Stand Mixer off (0) and unplug.
2.
For Stand Mixers with a hinged power hub cover: Flip up to open.
For Stand Mixers with a removable power hub cover: Turn the attachment knob
counterclockwise to remove power hub cover.
3.
Insert the Vegetable Sheet Cutter Attachment into the power hub, making certain that the
power shaft fits into the square hub. Rotate the Vegetable Sheet Cutter Attachment back
and forth if necessary. The pin on the shaft housing will slip fully into the notch on the hub
rim when it is in the proper position.
4.
Tighten the Attachment Knob until the Vegetable Sheet Cutter Attachment is completely
secured to the Stand Mixer.

PRODUCT USAGE

PREPARING TO PROCESS CUCUMBERS/ZUCCHINI
NOTE: For best results, food should be 3.8-8.9 cm in diameter.
1.
Rotate lever clockwise to the locked position.
2.
Cut Cucumber or Zucchini to a maximum length of 11.4 cm.
TIP: The first mark on the Food Skewer is 11.4 cm from the round skewer base.
3.
Insert the Food Holder into one end, then the Zucchini/Cucumber Adapter into the other,
using the markings to align both holder and adapter. Make sure the Food Holder and
adapter are centred.
4.
Place the food and Food Holder onto the main body and twist clockwise to lock into place.
5.
Insert the Food Skewer into the skewer support on the attachment, making sure it goes all
the way through the vegetable. Make sure there is no gap between the skewer knob and
the skewer support on the Main Body.
5