Page 1
If the figures on the tables do not match the results of formulas, use the figures in the table. § The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local building codes.
MT1050 Installation Data with Optional MT10RL Rear Lens (1.0:1) Projection Distance and Screen Size for Desktop The following diagram shows the relationship between projector position and the screen. Distances are in inches. For millimeters multiply by 25.4. Desktop Setup Screen Ctr...
Page 3
Visual Systems Division Technical Bulletin MT1050 Installation Data with Optional MT10RL Rear Lens (1.0:1) Rev. 1.7 Other Applications using MT1050 with 1.0:1 Rear Projection Lens Rear Projection Systems (contact third party manufacturer for these frame/mirror/screen kits) Page 3...
MT1050 Installation Data with Optional MT10RL Rear Lens (1.0:1) Rev. 1.7 Cabinet Dimensions The following diagrams show the cabinet dimensions for the MT1050 with optional MT10RL lens. Dimensions are in inches. For millimeters multiply by 25.4. •£ MT1050 AC IN • @• `...
Page 5
MT1050 Installation Data with Optional MT10RL Rear Lens (1.0:1) Rev. 1.7 Cabinet Dimensions (continued) The following diagrams show the cabinet dimensions for the MT1050 with optional MT10RL lens. Dimensions are in inches. For millimeters multiply by 25.4. 0.787 9.49 2.36 5.63...
#Y: Images in above flagged with # and Y are compressed with Advanced AccuBlend on MT850 only. ##Y: Images in above flagged with ## and Y are compressed with Advanced AccuBlend on MT1055/MT1050 and MT850. NOTE1: Some composite sync signals may not be displayed correctly.
X on/off: None Communications: Full duplex PC Control Connector (DIN-8P) To GND of PC NOTE: Pins 2, 3, 5, 6 and 8 are used inside the projector. Code Data To RxD of PC To TxD of PC Rev. 1.7 Page 7...