Advertisement
(2) According to different controller installation methods, choose one of the following two ways to install the
holding bracket and connect the cable .
Way 1. For controller that will be installed on the wall, conduct holding bracket installation and cable
connection by followings steps:
a. Secure the holding bracket onto the wall with screws (accessory).
b. Plug the connector of the connecting wire into the CN1.
c. Connect wire stuck in the slot.
d. Attach the stopper (plastic band) to the cable at the inside of the draw-out hole.
a
c
上
上
b
CN1
2. Installation Work
d
Draw-out Hole
Cable
Band Stopper
(Field-Supplied)
8
Advertisement
