Advertisement
PARTS
9
ASSEMBLY
1. Push the Stand Pole [10] through the
Base Plate [8] and it will clip in secure by
twisting the lock.
2. Place Rear Grille [5] on Motor Housing
[11] aligning with rear posts, and secure
with Nut [4]
3. Attach Fan Blade [3] onto Fixing Point [6]
and secure with Cap [2]
4. Clip Front Grille [1] onto Rear Grille [5]
using attached clips, and screw in
Securing Screw [9]. Screw Hole on the
Front Grille should be at the top.
OSCILLATION
Press the switch on the rear of the fan to engage the oscillation feature.
ZNPDF1211B
7
6
11
10
8
1. Front Grille
2. Fan Blade Securing Cap
3. Fan Blade
4. Rear Grille Securing Nut
5. Rear Grille
6. Fan Blade Fixing Point
7. Oscillation Switch
8. Fan Base Plate
9. Grille Securing Screw & Nut
10. Stand Pole
11. Motor Housing
SETTINGS
Off
Low
Med
High
Revision 1.5
Advertisement
