Function Settings Menu; Setting The Power Management For Computer Images; Power/Standby Indicator; Setting The Input Skip - NEC PlasmaSync 42VR5 Operation Manual

Function Settings Menu

Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor's power consumption
if no operation is performed for a certain amount of time.
Example: Turning the power management function on
On "POWER MGT." of "FUNCTION" menu, select "ON".
FUNCTION
POWER MGT.
INPUT SKIP
PDP SAVER
CLOSED CAPTION
CAPTION CONT
SEL. ADJ.
Information
Power management function
* The power management function automatically reduces
the monitor's power consumption if the computer's
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer.
* If the computer's power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer's power
management function, refer to the computer's operating
instructions.
Power management settings
ON: In this mode the power management function is
turned on.
OFF: In this mode the power management function is
turned off.
Power management function and POWER/
STANDBY indicator
The POWER/STANDBY indicator indicates the status
of the power management function. See below for
indicator status and description.

POWER/STANDBY indicator

Power POWER/ Power
management STANDBY management
mode indicator operating status
On Green Not activated.
Off Red Activated.
: ON
: OFF
: MANUAL
: OFF
: LOW
EXIT RETURN
Description Turning the picture
back on
Horizontal and vertical Picture already on.
synchronizing signals
are present from the
computer.
Horizontal and/or Operate the keyboard or
vertical synchronizing mouse. The picture
signals are not sent reappears.
from the computer.

Setting the Input Skip

When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.
Example: Set to "ON"
On "INPUT SKIP" of "FUNCTION" menu, select "ON".
POWER MGT.
INPUT SKIP
PDP SAVER
CLOSED CAPTION
CAPTION CONT
SEL. ADJ.
Information
INPUT SKIP settings
OFF: Regardless of the presence of the signal, scan
and display all signals.
ON: If no input signal is present, skip that signal.
* "SETTING NOW" will appear during the input search.

Reducing burn-in of the screen

The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.
On "PDP SAVER" of "FUNCTION" menu, select
"MANUAL", then press the MENU/ENTER button.
The "PDP SAVER" screen appears.
PEAK BRIGHT
ORBITER
INVERSE/WHITE
SCREEN WIPER
SOFT FOCUS
OSM ORBITER
OSM CONTRAST
SEL. ADJ.
Information
When set to AUTO
Set automatically, as described below.
PEAK BRIGHT: 100%
ORBITER: ON
INVERSE/WHITE: OFF
SCREEN WIPER: OFF
SOFT FOCUS: OFF
OSD ORBITER: ON
OSD CONTRAST: LOW
24
FUNCTION
: OFF
: ON
: MANUAL
: OFF
: LOW
EXIT RETURN
PDP SAVER
: 100%
: OFF
: OFF
: OFF
: OFF
: ON
: LOW
EXIT RETURN