Appendix A - Wallbox Settings - ZCS AZZURRO CONNEXT User Manual

Solo documento principale.
14. Appendix A – Wallbox settings
Registration of the wallbox on the Connext System via the app must be carried out with the wallbox
switched on and set to Plug&Play operating mode.
Wallbox settings can be changed using the front keypad.
Back
1) Press the Confirm/Enter key for at least 10 seconds
2) The page shown in the figure below appears; use the Next, Back and Confirm/Enter keys to enter
your password. Password: 123456
3) From the screen in the figure below, select point '1. Settings', and press the Confirm/Enter key.
Wait for the page in Figure 68 to appear.
Connext User Manual
Rev. 2.2 10/01/2023
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Next
Figure 65 - Control keypad
Enter 6-digit PWD
1 2 3 4 5 6 7 8 9 0
Figure 66 - Password entry screen
1. Setting
2.Maintenance
3. Management
Figure 67 - Main configuration screen
Cancel/Back Confirm/Enter
61/67