Elevator - KRILL AIRCRAFT LASER Z2300 Mk2 Assembly Manual

Second operation is to secure horizontal stabilizator against motion. This can be done two ways.
First is to drill hole, which goes throught surface and carbon fiber tube (stabilizator spar). And
place a pin (or screw) into this hole. This operation has to be done on both halfs!

5.1.3 Elevator

Use Gabriel horns 6/27 size from accessories. Glue it to predrilled holes on both elevators.
For linkage use Secraft turnbuckle ALU pushrod 60 mm long, from one side is mounted Secraft ball
link M3, from second original Gabriel ball link, overall lenght of the link is 80 mm. 45 mm ALU
Secraft V2 servo arms is used there.
5