Maintenance - Husqvarna CG 200 Operator's Manual

2. Push the lever (1) forward to engage the drum.
Introduction
WARNING:
from the power supply before you do

maintenance.

CAUTION:
To check before operation
1. Check the engine oil.
2. Carry out a general inspection checking that no nuts
or bolts are loose.
To check after operation.
CAUTION:
down by the regulations in force.
1. Clean the product.
10
Maintenance
Disconnect the product
Maintain the tools carefully.
Dispose of the old oil as laid
2. Lubricate the grease nipples on the wheelbase (1),
depth adjustment bearing (2) and on the roller
bearings (3).
3. See the engine manual for motor oil replacement .
130 - 004 - 19.01.2023