Download Print this page
Carel pGDx Quick Start Manual

Carel pGDx Quick Start Manual

User terminal touch 7"

Advertisement

Quick Links

+050001950 - rel. 1.3 - 02.03.2020
pGDx
Terminale utente pGDx Touch 7" - User terminal pGDx Touch 7"
Dimensioni / Dimensions (mm)
183
10.8
42.5
200
2
231.7
44.7
9.7
Accessorio per installazione a muro a sbalzo (rif. fi gura 1c) - codice: PGTA00SM70
Accessory for wall surface installation (ref. Figure 1c) - P/N: PGTA00SM70
230
200
28
60
83.5
Accessorio per installazione a muro ad incasso (rif. fi gura 1d) - codice: PGTA00RM70
Accessory for fl ush-mounted wall installation (ref. Figure 1d) - P/N: PGTA00RM70
225.7
56
200
Installazione e montaggio / Assembly and installation (mm)
Frontale / Frontal
Codice placchetta
Frame code:
PGTA**F[B,W][2,3]*
(*)
Fig.1a
(*) IP66: con guarnizione e spessore lamiera da 1.2÷6 mm / with gasket and sheet thickness from 1.2 - 6 mm
IP20: senza guarnizione e spessore lamiera da 0.8÷6 mm / without gasket and sheet thickness from 0.8 - 6 mm
Retro / Back
Importante:
mantenere
il cavo fl at isolato
dal pannello
metallico
Important:
keep the fl at cable
R4
isolated from the
metal panel
Non fornita da Carel / Not supplied by Carel
Fig.1b
(*) IP20: spessore lamiera da 0.8÷2 mm / sheet thickness from 0.8 - 2 mm
Muro sbalzo
Wall surface
Nota:
Note:
Non convogliare
Do not run power
cavi di potenza
cables inside the
all'interno dela
fl ush-mount box
scatola da incasso
Codice placchetta/Frame code: PGTA**F[T,H][2,3]*
Fig.1c
Muro incasso/
Wall mounting
Cartongesso
Dry wall
Nota:
Note:
Non convogliare
Do not run power
cavi di potenza
cables inside the
all'interno dela
fl ush-mount box
scatola da incasso
Codice placchetta/Frame code: PGTA**F[T,H][2,3]*
Fig.1d
Smaltimento del prodotto: L'apparecchiatura (o il prodotto) deve essere oggetto di raccolta separata in
conformità alle vigenti normative locali in materia di smaltimento. / Disposal of the product: The appliance
(or the product) must be disposed of separately in compliance with the local standards in force on waste
disposal.
Introduzione
Il terminale grafi co pGDx da 7 pollici appartiene alla famiglia di terminali touch screen
pensata per rendere semplice e intuitivo l'interfacciamento dell'utente con i controlli
della famiglia pCO Sistema. La tecnologia elettronica utilizzata e il display a 16.7M colori
permettono di gestire immagini di alta qualità e funzionalità avanzate per ottenere un
elevato standard estetico. Il pannello touch screen, inoltre, facilita l'interazione uomo-
macchina rendendo, di fatto, più facile la navigazione tra le varie schermate. A seconda
dei modelli, sono possibili diverse installazioni: a pannello, sia frontale che da retro, a muro
oppure ad incasso. In ogni caso è consentito sia l'orientamento orizzontale che verticale.
Codici modelli
Codice
PGR07****B***
PGR07****W***
230
PGR07****D***
PGR07****C***
PGR07****R***
PGR07****F***
PGR07****G***
PGB07****E***
PGB07****M***
PGB07****I***
212.5
Contenuto confezione
pGDx; connettori alimentazione e connettori RS485; kit di fi ssaggio; foglio istruzioni,
antenna Wi Fi (solo nei modelli che la prevedono, PG*07***D[G,I,R,W]***). Sono esclusi
invece: placchetta, alimentatore PGTA00TRX0 e scatole per il montaggio a muro.
Avvertenze per l'installazione
200
Per una installazione a regola d'arte rivolgersi ad installatori abilitati. Evitare il montaggio dei
terminali in ambienti che presentino le seguenti caratteristiche:
• umidità relativa maggiore di quanto indicato nelle specifi che tecniche;
• forti vibrazioni o urti;
• esposizione ad atmosfere aggressive ed inquinanti (es.: gas solforici e ammoniacali,
nebbie saline, fumi) con conseguente corrosione e/o ossidazione;
• elevate interferenze magnetiche e/o radiofrequenze (evitare quindi l'installazione delle
macchine vicino ad antenne trasmittenti);
• esposizione all'irraggiamento solare diretto e agli agenti atmosferici in genere;
• ampie e rapide fl uttuazioni della temperatura ambiente;
• ambienti ove sono presenti esplosivi o miscele di gas infi ammabili.
Devono essere rispettate le seguenti prescrizioni:
176
• con sonda temperatura/umidità a bordo si raccomanda di:
– utilizzare solo placchetta dotate di foro di aerazione
– installare il terminale lontano dai fl ussi d'aria proveniente da fonti di calore/
raff rescamento
– se installato in verticale, posizionare la sonda nella parte inferiore del display
• per le reti di comunicazione Ethernet e RS485 utilizzare esclusivamente cavi schermati;
221.7
• utilizzare una tensione di alimentazione pari a quella prescritta, al fi ne di evitare di
danneggiare in modo irreparabile il dispositivo;
• utilizzare capicorda adatti per i morsetti in uso. Allentare ogni vite ed inserirvi i capicorda,
quindi serrare le viti. Ad operazione ultimata tirare leggermente i cavi per verifi carne il
corretto serraggio;
• nei modelli con antenna Wi-Fi esterna mantenere almeno un isolamento principale
(500 Vac secondo la IEC 60730-1) tra il connettore RP-SMA e la terra di protezione;
• non aprire il prodotto quando è alimentato;
• l'uso a temperature particolarmente basse può causare una visibile diminuzione
della velocità di risposta del display. Questo è da ritenersi normale e non è indice di
malfunzionamento.
• per una corretta installazione utilizzare una coppia di serraggio delle viti di 0.4 Nm. Inoltre,
nei modelli PG*07***[N,T]****, per raggiungere il grado di protezione IP dichiarato è
necessario che l'indice di rugosità del pannello non superi 1.6 μm e che la guarnizione
sia correttamente assemblata;
• evitare il contatto del prodotto con parti a tensioni pericolose.
• assicurarsi che i cavi siano opportunamente fi ssati in modo da evitare il contatto con
parti a tensioni pericolose nel caso di loro accidentale disconnessione.
Signifi cato colori notifi cation bar
All'accensione la notifi cation bar esegue una breve segnalazione di color blu per indicare
M3 self-blocking inserts
or Ø 4.2 for screw
l'avvio della fase di boot. Le seguenti segnalazioni sono poi gestite dal programma
+ counter-screw
applicativo realizzato con c.touch.
Aggiornamento HMI Runtime e/o applicazione
1. Copiare il pacchetto di aggiornamento (fi le .ZIP) contenente
il runtime o l'applicazione, oppure entrambi, a seconda
delle opzioni scelte al momento della generazione di
Passaggio cavo fl at
"Update package" con c.touch, in una chiavetta USB e
(solo in caso
successivamente collegare la chiavetta al pGDx. Tenere
di tastiera esterna)
premuto il dito sullo schermo del terminale pGDx per alcuni
Flat cable passage
secondi fi no a che il menu contestuale sarà visualizzato,
(only in case
disabilitabile lato applicativo (Fig. a lato):
of external keypad)
2. Selezionare
M3 threaded pins
"Update..." per
avviare la procedura
di aggiornamento
Runtime e/o
applicazione. L'utility
per l'aggiornamento si
avvierà ed apparirà la
seguente fi nestra:
Impostazioni di sistema
Tenere premuto il dito sullo schermo del
terminale pGDx per alcuni secondi fi no a
che il menu contestuale sarà visualizzato
(fi g. sotto), Selezionare "Show system
settings", apparirà la schermata principale
Scatola a muro / Wall box
del programma di confi gurazione (fi g a
standard ITA/CHN/DEU/USA
lato):
Di seguito elencate le funzioni presenti nelle diff erenti voci del menù:
Language
System
Logs
Date & Time
Network
Services
Management
Display
Restart
Authentication
EXIT
N. porte RS485
N. porte ETH
Connettività Wi-Fi
1
-
-
ü
1
-
2
-
-
1
1
-
ü
1
1
2
2
-
ü
2
2
-
1
-
-
2
-
ü
-
2
3. Seguire quindi la
procedura guidata
selezionando il
fi le inserito nella
chiavetta USB e
premendo il tasto
next per conferma.
Impostazione della lingua di sistema (non dell'applicazione c.touch)
Contiene informazioni su pGDx: Versione BSP, Memoria, Timers e
sensore tempearatura / umidità (se presente)
Permette di scaricare i fi le di log del sistema
Permette si settare data e ora di pGDx attraverso procedura
automatica o manuale
Mostra gli attuali dati IP del sistema (indirizzo, subnet, Gateway,
DHCP, DNS) e permette di accedere al menu di confi gurazione della
porta Ethernet e dell'interfaccia Wi Fi
Permette di accendere/spegnere diversi servizi di sistema (Modbus
server port, indirizzo pGDx nella rete,...)
Permette di aggiornare le diverse partizioni BSP di pGDx (Confi gOS,
MainOS, Bootloader, Splash image, etc...)
Permette di impostare luminosità, backlight timeout, orientamento
dello schermo e calibrazione del touch panel
Lancia un riavvio del sistema
Permette di impostare password per accesso
Permette uscire dal menù
Introduction
The pGDx 7 inch graphic terminal is part of the family of touchscreen terminals designed to
simplify user interface with the pCO sistema family controllers. The electronic technology
used and the new 16.7M colour display means high quality images and advanced functions
are available for a superior appearance. The touchscreen panel moreover makes interaction
between the user and the unit much easier by simplifying navigation between the various
screens. Diff erent types of installation are available, depending on the model: front or
back panel, wall surface or fl ush-mount. In any case, the device can be mounted either
horizontally or vertically.
Part numbers
Part number
No. RS485 ports
No. ETH ports
PGR07****B***
1
PGR07****W***
1
PGR07****D***
2
PGR07****C***
1
PGR07****R***
1
PGR07****F***
2
PGR07****G***
2
PGB07****E***
-
PGB07****M***
-
PGB07****I***
-
Packaging contents
pGDx; power supply and RS485 connectors; installation kit; technical leafl et, WiFi antenna
(only for models where fi tted, PG*07***D[G,I,R,W]***). Not included: frame, PGTA00TRX0
power supply and wall mounting boxes .
Installation warnings
For correct installation contact a qualifi ed installer.
Do not install the terminals in environments with the following characteristics:
• relative humidity greater than the value specifi ed in the technical specifi cations;
• strong vibrations or knocks;
• exposure to aggressive and polluting atmospheres (e.g.: sulphur and ammonia fumes,
salt spray, smoke) so as to avoid corrosion and/or oxidation;
• strong magnetic and/or radio frequency interference (therefore avoid installing the units
near transmitting antennae);
• exposure to direct sunlight or the elements in general;
• large and rapid fl uctuations in the room temperature;
• environments where explosives or mixes of fl ammable gases are present.
The following requirements must be met
• with built-in temperature/humidity sensor, it is recommended to:
– only use frame fi tted ventilation openings
– install the terminal away from air streams coming from heating/cooling systems
– if installed vertically, position the probe at the bottom of the display
• only use shielded cables for Ethernet and RS485 communication networks;
• power supply voltages other than those specifi ed may seriously damage the system;
• use cable ends suitable for the corresponding terminals. Loosen each screw and insert
the cable ends, then tighten the screws. When the operation is completed, slightly tug
the cables to check they are suffi ciently tight;
• in models with an external WiFi antenna, ensure at least basic insulation (500 Vac
according to IEC 60730-1) between the RP-SMA connector and the protective earth;
• do not open the product when powered;
• operation at low temperatures may cause a noticeable decline in the response speed
of the display. This should be considered normal and does not indicate a malfunction.
• for correct installation, apply a tightening torque of 0.4 Nm. Furthermore, on
PG*07***[N,T]**** models, to ensure the declared IP value, the panel roughness index
must not exceed 1.6 μm and the gasket must be fi tted correctly;
• avoid any contact of the product with live parts.
• be sure that cables are accurately fi xed in order to avoid contact with live parts in case of
their accidentally disconnection.
Meaning of the colours on the notifi cation bar
At power-on, the notifi cation bar briefl y shows a blue signal to indicate the start of the
boot phase. The subsequent signals are then managed by the application program
developed using c.touch.
HMI Runtime and/or application update
1. Copy the update package (.ZIP fi le) containing the runtime
or application, or both, depending on the options selected
when generating the "Update package" using c.touch, to a
USB pendrive and then plug the pendrive into the pGDx and
hold the pGDx terminal screen for a few seconds until the
shortcut menu is displayed, disableable application side (see
the fi gure on the side):
2. Select "Update..." to
start the Runtime and/
or application update
procedure. The update
utility will start and the
following window will
be displayed:
System settings
Touch and hold the pGDx terminal screen
for a few seconds until the shortcut
menu is displayed (see the fi gure below).
Select "Show system settings"; the main
confi guration program screen will be
displayed (fi gure on the side):
Below is a list of the functions relating to the diff erent menu items:
Language
Set the system language (not the c.touch application)
Contains information on the pGDx: BSP version, Memory, Timers
System
and temperature / humidity sensor (if featured)
Logs
Download the system log fi les
Date & Time
Set pGDx date and time using the automatic or manual procedure
Show current system IP data (address, subnet, Gateway, DHCP, DNS)
Network
and access the Ethernet and WiFi interface
Start/stop various system services (Modbus server port, pGDx
Services
network address,...)
Update the diff erent pGDx BSP partitions (Confi gOS, MainOS,
Management
Bootloader, Splash image, etc....)
Set brightness, backlight timeout, screen orientation and touch
Display
panel calibration
Restart
Restart the system
Authentication
Set the password used to access
EXIT
Exit the menu
WiFi connectivity
-
-
ü
-
-
-
1
-
ü
1
2
-
ü
2
1
-
2
-
ü
2
3. Then follow the
guided procedure,
selecting the fi le
saved on the USB
pen drive and
clicking the next
button to confi rm.

Advertisement

loading
Need help?

Need help?

Do you have a question about the pGDx and is the answer not in the manual?

Questions and answers

Summary of Contents for Carel pGDx

  • Page 1 Il terminale grafi co pGDx da 7 pollici appartiene alla famiglia di terminali touch screen The pGDx 7 inch graphic terminal is part of the family of touchscreen terminals designed to pensata per rendere semplice e intuitivo l’interfacciamento dell’utente con i controlli simplify user interface with the pCO sistema family controllers.
  • Page 2 fi nal installation and/or equipment. The lack of such phase of study, which is requested/indicated in the user manual, can cause the fi nal product to malfunction of which CAREL can not be held responsible. The fi nal client must use the product only in the manner described in the documentation related to the product itself.