Page 3
INDEX 1. Parts and components 2. Safety instructions 3. Before use 4. Product assembly 5. Operation 6. Cleaning and maintenance 7. Technical speciffications 8. Disposal of old electrical appliances 9. Technical support service and warranty...
Page 4
1. Parts and components 1. Mounting bracket 2. Hanging ball 3. Downrod 4. Screws I 5. Canopy 6. Screws II 7. Clevis pin 8. Mounting plate 9. Motor 10. Screw and washer 11. Blades 12. Blade assembly disc 13. Screws III 14.
Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec, in order to avoid any type of danger. WARNING: do not use the appliance if its cord, plug, or housing is damaged, nor after it malfunctions or has been dropped or damaged in any way.
Page 6
8. • Do not try to repair the appliance by yourself. Contact the official Technical Support Service of Cecotec for advice. • Cleaning and maintenance must be carried out according to this instruction manual to make sure the appliance functions properly.
• The fan must be properly grounded to avoid the risk of electric shocks. • Never mount the fan in a moist or wet room. • Be careful when working near the rotating blades. • This appliance must be installed in accordance with the national electrical installation regulations.
Pass the same cables through the hanging ball. Then, pass the cables again through the downrod. Fix the downrod to the mounting plate using the clevis pin and 2 screws provided. Make sure both pieces are securely fixed. Insert the pin through the pin holes located on the upper end of the downrod. Once it is inserted, slide the hanging ball towards the top in order to place it in the same downrod’s upper end and fix it with one of the screws provided.
Turn the power supply on again and switch on. NOTE: ForceSilence Aero 350 and 360 both require 1 x E27 bulb, 60 W (not included). ForceSilence Aero 450 requires 1 x E14 bulb, 60 W (not included). ForceSilence Aero 540 requires 2 x E27 bulbs, 40 W (not included).
• The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec. • Faults deriving from the normal wear and tear of its parts, due to use.
Page 11
Grupo Cecotec Innovaciones S. L. C/de la Pinadeta s/n, 46930 Quart de Poblet, Valencia, Spain...
Need help?
Do you have a question about the FORCESILENCE AERO 350 and is the answer not in the manual?
Questions and answers