Logitech H800 - Bluetooth Headset Setup Guide

Overview

1. Headset
2. Ear pads
3. Adjustable headband
4. Adjustable microphone arm
5. Microphone
6. Nano receiver storage
7. Device selection switch
8. Wireless status light
9. Previous track/Rewind
10. Next track/Fast forward
11. Battery status light
12. Charging port
13. Microphone mute
14. Volume up
15. Volume down
16. Play/Pause or Answer call/End call¹
17. Nano receiver
18. USB charging cable
19. Documentation

¹ Answer call/End call works only with Bluetooth smartphones.

Charge the battery

1. Connect the headset to a computer using the USB charging cable.
2. Charge the headset for 3 hours or until the Battery Status light turns solid amber.

Note: You can use the headset while it recharges.

Battery status

Set up your product

Nano receiver installation

Pairing a Bluetooth device

1. Turn on the headset. Do not use the Nano receiver.
2. Move the Device Selection switch to the Bluetooth icon. The Wireless Status light blinks green. The Headset is discoverable.
3. Turn on your device, and then turn on Bluetooth.
   (For help, refer to your device documentation.)
4. On your device, go to the Bluetooth device list and select "Bluetooth Hands Free Audio". If prompted for a code or PIN, enter "0000". After the connection is made, the Wireless Status light turns solid green.

Pairing additional Bluetooth devices

Pair up to seven devices with the headset. Note that you can only use one device at a time. To switch devices, disconnect the headset from the current device (turn off its Bluetooth feature) before connecting to another device.

To pair an additional device:

1. Make the headset discoverable for additional devices:
   1. Slide the Track switch to Next Track and hold it there.
   2. While holding the Track switch, press and hold the Volume Up button.
   3. Wait for the Wireless Status light to blink green before releasing the switch and button. The headset is discoverable.
2. Finish pairing on your new device: Repeat steps 3 and 4 in "Pair a Bluetooth device".

Use your product

Listen to music or make an Internet call. If the headset does not work, make the headset the default audio input/output device for your operating system.

Windows® Vista and Windows® 7

1. Go to Start > Control Panel > Sounds > Playback Devices tab.
2. Choose Playback devices.
3. Choose "Logitech Wireless Headset". Click "Set Default," and then click "OK".
4. Select the Recording tab.
5. Choose "Logitech Wireless Headset". Click "Set Default," and then click "OK".
6. Restart your media application.

Windows®8

1. From Start Menu, select Desktop tile
2. From Charms menu, select Settings> Control Panel>Hardware and Sound
3. Go to Sound>Playback tab
4. Choose "Logitech Wireless Headset H800".
5. Click "Set Default," and then click "OK."
6. Select the Recording Tab.
7. Choose "Logitech Wireless Headset H800".
8. Click "Set Default," and then click "OK."

Mac OS X

1. Open System Preferences.
2. Choose the Sound/Output tab.
3. Choose "Logitech Wireless Headset".
4. Select the Input tab.
5. Choose "Logitech Wireless Headset".
6. Close the window and restart your media application.

Answering a call

To answer a call or end a call using a smartphone, press and hold the Play/Pause button for 3 seconds.
The answer call/end call feature only works with smartphones. It's not designed to work with PCs.

Wireless status light

Visit Product Central

There's more information and support online for your product. Take a moment to visit Product Central to learn more about your new headset.

Browse online articles for setup help, usage tips, or information about additional features.

Connect with other users in our Community Forums to get advice, ask questions, and share solutions.

At Product Central, you'll find a wide selection of content:

• Tutorials
• Troubleshooting
• Support community
• Software downloads
• Online documentation
• Warranty information
• Spare parts (when available)

Go to www.logitech.com/support/H800

Troubleshooting

Headset is not working

• Move closer to the Nano receiver or Bluetooth device. When in range (within 12 meters or 40 feet) and connected, the Wireless Status light is green.
• When using the Nano receiver, set the Device Selection switch to the receiver icon. Do not use a USB hub or the charging cable. Plug the Nano receiver directly into your computer.
• Adjust the volume and microphone settings in your application and operating system.
• Make the headset the default input/output audio device in your application and operating system. See "Use your product" for more information.

Bluetooth device is not pairing

• Do not use the Nano receiver.
• Move the Device Selection switch to "OFF" then to the Bluetooth icon.
• Re-establish pairing:
  1. Press and hold for 5 seconds the Volume + and Next Track/Fast Forward buttons to make the headset discoverable again. The Wireless Status light should blink green.
  2. Finish pairing on your device. See steps 3 and 4 in "Pairing a Bluetooth device" for more information.
  • If you have paired multiple devices, refer to "Pairing additional Bluetooth devices" in this guide, or go to www.logitech.com/support/h800 and look for FAQs about connecting multiple Bluetooth devices.
  • Try using the headset with a different Bluetooth device.
  • For PCs, using the Nano receiver is recommended.

Headset is not charging

• Make sure to use the USB charging cable.
• Connect the cable directly to a USB port on your computer. Do not use your keyboard, monitor, or a USB hub to charge the headset.
• While charging, the Battery Status light should flash amber. If not, the USB port may not be providing enough power. Try another USB port on your computer, or turn on or wake up your computer.

Media controls are not working

Music controls are only supported in Apple iTunes and Windows Media Player®.

Some headset functions are not supported by some tablets or smartphones.

With Windows®, to improve media control download and install software from www.logitech.com/support/h800

www.logitech.com

© 2012 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Microsoft, Windows, Windows Media Player, and the Windows logo are trademarks of the Microsoft group of companies. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.