4. Troubleshooting
4.4. Buyer-Region Code Setting Method
4.4.1. The inserting method of Region Code after replacing the Main PBA
NOTE
•
When replacing the Main PBA and System Micom should be inserted the region code.
•
The set is not working properly if you don't insert the region code.
•
The region code is inserted by the remote control.
1) Change to "AUX" function, and then push the 'ENTER' button about 10 second.
2) When displayed "TEST", input 46 to set the buyer.
3) When displayed "– – –", input the buyer code, refer to the follow Option Table.
4) It will show the buyer that you set up. Then the buyer setting is succeed.
4-8
Copyright© 1995-2013 SAMSUNG. All rights reserved.