Insignia fire tv NS-65DF710NA21 Quick Setup Manual

QUICK SETUP GUIDE
65"
60 Hz LED TV
4K ULTRA HD
NS 65DF710NA21
INCLUDED ACCESSORIES
Voice Remote with Alexa
+ +
and two AAA batteries
TV stands
M4 screws
(24 mm length) (4pcs.)
Power cord
STOP
Before using your new product, please
read these instructions to prevent any
damage.
Do not plug your power cord in until all
other devices have been connected.
INSTALLING THE STANDS OR A WALL MOUNT
1
Place your TV face-down on a cushioned, clean surface.
STANDS
1 Align the TV stand screw holes
with the holes on your
TV's bottom.
2 Use a Phillips screwdriver and
two provided screws to secure
each stand to your TV.
M4 × 24 mm screws
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount
for more information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
MAKING CONNECTIONS
2
HDMI
(best video quality)
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
AV
(good video quality)
AUDIO/VIDEO OUT
Coaxial
(good video quality)
HD
Connect an antenna to
access live over-the-air TV.
VESA Mounting Pattern
400 x 300 mm
Screws: type M6, 12 mm to
14 mm length depending on the wall mount
DIGITAL
OPTICAL
OUTPUT
AUDIO
OUT
HDMI1 HDMI2 HDMI3
(ARC)
HDMI OPTIONS
VIDEO L AUDIO R
AV IN
ANT/CABLE
ETHERNET
FEATURES
Power/
Input button
Press to turn your TV on or o
manually.
When your TV is on, a short press
changes inputs and a long press
turns o your TV.
M4 × 24 mm screws
DIGITAL OPTICAL
ETHERNET
OUTPUT
Note: Images do not necessarily represent the exact design
of your television.
DIGITAL
AUDIO OPTIONS
You can use the DIGITAL OPTICAL
OUTPUT jack or the HDMI1
(ARC) jack.
OPTICAL
Note: If you need to change the
AUDIO IN
digital audio format, go to the
SOUNDBAR
Home menu, select Settings, then
select Display & Sounds. Select
Audio Output, then select Digital
Audio Format and change the
ANALOG
setting to PCM or Dolby Digital.
L
R
AUDIO IN
SOUNDBAR
ETHERNET (optional)
Note: You can use a wired Ethernet connection to
access the internet instead of a WiFi connection.
ETHERNET
Plug an Ethernet cable into the ETHERNET jack on
your TV and your Ethernet connection.
Power indicator
Remote control sensor
AUDIO OUT
USB
HDMI1
(ARC)
HDMI2
HDMI3
VIDEO L AUDIO R
ANT/CABLE
AV IN