Important Safety Instructions; Technical Features - PPA DZ HUB R Technical Manual

IMPORTANT SAFETY INSTRUCTIONS

RECOMMENDATION:
The installer must be a PPA specialized ins-
taller to install DZ HUB R. Follow all the in-s-
tructions given on the TECHNICAL MANUAL
and USER'S MANUAL.
With the USER'S MANUAL in hands, the ins-
taller must show the equipment's informa-
tion, applications, and security items to the
user.
Before using the operator, closely read and
follow the instructions contained in this
manu-al.
- Before installing the operator, make sure
the local electric power supply is compa-
ti-ble with the one required on the equip-
ment identification label.
- Do not turn on the electric power supply
until installation or maintenance are com-
pleted. Always make the control board
electrical connections with the power su-
pply turned off.
- Once installation is complete, ensure the
gate parts do not extend into the paths and
public sidewalk.
- Using total shutdown devices when ins-
talling an operator is mandatory.
4

TECHNICAL FEATURES

DZ HUB R 600
TYPE OF OPERATOR
Sliding
MODEL Single-phase
RATED VOLTAGE 127 V / 220 V
NOMINAL FREQUENCY 60 Hz
NOMINAL POWER 250 W / 400 W
MOTOR ROTATION
1740 RPM
NOMINAL CURRENT 2.3 A / 2.0 A
REDUCTION RATIO
1:23
17.1 m/min (Z18)
LINEAR SPEED
20.9 m/min (Z22)
CYCLES/HOUR 30 to 60
DEGREE OF PROTECTION IPX4
TEMPERATURE RANGE -5° C / +50° C
INSULATION TYPE Class B, 130° C
LIMIT SWITCH
Analog or Digital
GATE LEAF MAX. MASS 600 Kg
HEIGHT = 2.5 m
GATE MAX. DIMENSION
LENGTH = 3.0 m
DZ HUB R 350 DZ HUB R 550 DZ HUB R 450
JETFLEX JETFLEX 24V
Sliding Sliding Sliding
Jetflex Jetflex Brushless 24V
127 V / 220 V 127 V / 220 V 85 – 265 V
60 Hz 60 Hz 60 Hz
280 W / 340 W 450 W / 500 W 50 W
5800 RPM 5800 RPM 2200 RPM
2.5 A / 2.4 A 4.5 A / 3.5 A 0.7 A
1:23 1:23 1:23
16,8 m/min (Z14)
57 m/min (Z18) 57 m/min (Z18)
21.6 m/min (Z18)
30 40 40
IPX4 IPX4 IPX4
-5° C / +50° C -5° C / +50° C -5° C / +50° C
Class B, 130° C Class B, 130° C Class B, 130° C
Hybrid Hybrid Hybrid
350 Kg 550 Kg 450 Kg
HEIGHT = 2.5 m HEIGHT = 2.5 m HEIGHT = 2.5 m
LENGTH = 3.0 m LENGTH = 3.0 m LENGTH = 3.0 m
5