Page 1
Nerf Blaster Scooter 3 Wheel Tilt&Turn Rapid Fire Scooter MODEL NO.: M5 Owner’s Manual Ages 6+...
Page 2
ATTENTION: 1. Before you allow your child to use Nerf Blaster Scooter, ensure that the steering rod is fully engaged and that all the screws are tight. Also ensure that the wheels have been correctly secured and that they show no signs of wear.
Page 3
ASSEMBLY Adult assembly required. Warning! Not to be used by children under 36 months due to small parts while unassembled. Choking Hazard. Parts List Tips: Please verify that all pieces are included prior to beginning assembly.
Page 4
Step 2: Remove M6 bolt from blaster, slide Step 1: Press the button and insert the the blaster into cradle, and then tighten stem into the base. blaster to cradle the M6 bolt completely. Step 3: Load 6 pcs batteries (C type, Step 4: Insert the handlebar grips into 1.5V), close the cover and tighten 4pcs the bare handlebars until both locking...
Page 5
HOW TO ADJUST THE HEIGHT The handlebar can be locked into place at 2 different heights. Please make the following adjustment to reach required height. Open the Quick Release Lock, press the locking button, adjust the handlebar to a suitable height, and then close the Quick Release Lock.
STORING YOUR BLASTER NOTE: Do not store blaster ready to fire. • Be sure to unload DARTS from blaster before putting it away. Remove batteries if storing Blaster Scooter for an extended period of time IMPORTANT: BATTERY INFORMATION [Caution Logo] CAUTION: 1.
Page 7
MAINTENANCE AND CHECK BEFORE RIDING ● Check that all parts are sufficiently tightened, and the handlebar is securely fixed. ● Check that all wheels can be spun smoothly and that the footplate is securely fastened. ● All nuts and bolts may lose their tightness over time, please check the tightness of all nuts and bolts every time you ride.
Need help?
Do you have a question about the Blaster Scooter and is the answer not in the manual?
Questions and answers