Retrieve Event - Motorola HMUG1080 User Manual

Working with the MHM Program
Status Icon Description
Item Description
The sensor is functioning normally.
No data is available. The MHM program hasn't communicated with the sensor yet.
Wait for at least 60 seconds and if still not connected, try re-discovering the
sensor. The wait period may be up to 20 minutes for Discovery.
No communication is possible. The Gateway cannot reach the sensor. Check the
batteries. If properly powered, try re-discovering the sensor or repositioning it.

Retrieve Event

When the Water Sensor is configured in
sends an event marker to the Archives. Refer to
Home Monitoring & Control System
Event Setup, is armed and detects an event, it
Archives for further details.
31 MHM User Guide