Dräger WaterLock 2 Quick Start Manual

QUICK START GUIDE
WaterLock® 2 /

Connecting the water trap

1. Remove the new water trap from the packaging.
Write the current date on the front of the water trap.
2.
NOTE
The 2nd step is not necessary if the water trap Infinity ID WaterLock 2
is used together with Dräger devices with Infinity ID technology as the
maximum period of use of the water trap is automatically monitored.
3. Hold the water trap
the holder or adapter until it audibly clicks into place.
4. Connect the sample line
of the water trap.

Replacing the water trap

• When the maximum period of use of 4 weeks is reached.
• If there is an error message on the patient monitor or the anesthesia workstation.
• If emptying does not rectify the error message of the patient monitor or the anesthesia workstation.
• If it is severely soiled.
• If the swelling seals in the connections turn blue.
To connect the new water trap, please follow the instructions from the chapter
"Connecting the water trap" above.
WaterLock® 2. 12 pcs.
Infinity ID WaterLock® 2, 12 pcs.
Sample line, disposable, 10 pcs.
Dräger. Technology for Life
Infinity ID WaterLock® 2
(A)
at the fluted grips and insert it into
(B)
to the Luer Lock connection
®
Please note: This Quick Reference Guide is not a replacement or substitute for the
instructions for use. Any use of the medical device requires full understanding and strict
observation of the instruction for use.
B
A
Order no.
6872130
6872020
8290286