Motorola HDT101 User Manual page 47

Connecting your A/V Receiver, VCR, and High-definition TV
1
Connect the HDT101 ports to the Y, Pb, and Pr ports on your TV
using the supplied component video cables.
2
Connect a coaxial audio cable to the
HDT101 and the
3
Connect a video cable to the
the /
CABLE TV VIDEO
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard-definition video quality than
composite video.
4
Connect a stereo audio cable to the
connectors on the A/V receiver and the
connectors on the stereo VCR.
When using the digital audio output (
baseband audio connections from the HDT101 to the A/V receiver
are not needed.
5
Connect a stereo audio cable to the
connectors on the stereo VCR and the
connectors on the A/V receiver.
6
Connect a video cable to the
VCR and the
7
Connect a video cable to the
VCR and the
8
Connect a video cable to the
the /
TV MONITOR OUTPUT VIDEO
To switch between viewing input from your VCR and input from your
HDT101, change your TV's video inputs from the Component input to the
Video input. You may also need to change your A/V receiver's video
input selection as well.
input connector on the A/V receiver.
SPDIF
VIDEO
connector on the A/V receiver.
INPUT VIDEO
connector on the A/V receiver.
VIDEO VCR OUT
OUTPUT VIDEO
connector on the A/V receiver.
VIDEO VCR IN
INPUT VIDEO
/
S PDIF OUT
connector on the HDT101 and
VCR AUDIO OUT R
INPUT AUDIO R
/
S PDIF OUT
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
connector on the stereo
connector on the TV and
connector on the A/V receiver.
41
connector on the
and
L
and
L
), the left/right
and
L
and
L