Caller Id - NEC Aspire Manual

Section 3: Features

Caller ID

• Available - 32 resources available on the CPU for Caller
ID (also used for DTMF receivers and Call Progress
Tone Detection). The DSPDB will NOT provide any
additional resources.
• Caller ID information is not available for Aspire Wire-
less (Aspire Wireless is not supported on Aspire S).
• Option for displaying Caller ID name for SLTs is
available.
• Adding trunk access code to Caller ID is available.
• Selecting FSK or DTMF for Caller ID requires software
2.63+.
• Caller ID Sender Queuing requires software 4.0E+.
• Selecting Caller ID FSK or DTMF signal from an ana-
log trunk requires software 4.0E+.
• Caller ID display changed for i-Series phones is not
available.
• Temporary storage of Caller ID numbers increased from
16 to 50 with software 4.93+.
• Caller ID Detection Time added with software 4.93+.
• Caller ID number deletion enhanced with 4.93+.
• Flexible Ringing by Caller ID requires software 4.93+.
Description
80
Aspire S
Caller ID allows a display keyset to show an incoming caller's telephone number (called the Direc-
tory Number or DN) and optional name. The Caller ID information is available as pre-answer dis-
play. With the pre-answer display, the user previews the caller's number before picking up the
ringing line. If Caller ID is enabled in the system, a user can check the Caller ID for a parked call
using their Park key and possibly the Flash key (depending on programming).
Second Call Display
While busy on a call, the telephone display can show the identity of an incoming trunk or Intercom
call. For incoming trunk calls, the display will show the Caller ID or ANI data or the trunk's name
if Caller ID or ANI are not installed. (See the T1 Trunking feature for more on ANI compatibility.)
For incoming Intercom calls, the display will show the calling extension's name.
Aspire M/L/XL
• Available - 32 resources available on the NTCPU for
Caller ID (also used for DTMF receivers and Call
Progress Tone Detection). The DSPDB provides an
additional 32 resources.
• Caller ID information available for Aspire Wireless with
software 1.05+.
• Option for displaying Caller ID name for SLTs is avail-
able with software 1.11+.
• Adding trunk access code to Caller ID requires software
2.01+.
• Selecting FSK or DTMF for SLT Caller ID requires
software 2.63+.
• Caller ID Sender Queuing requires software 4.0E+.
• Selecting Caller ID FSK or DTMF signal from an ana-
log trunk requires software 4.0E+.
• Caller ID display changed for i-Series phones requires
software 4.0E+.
• Temporary storage of Caller ID numbers increased from
16 to 50 with software 4.93+.
• Caller ID Detection Time added with software 4.93+.
• Caller ID number deletion enhanced with 4.93+.
• Flexible Ringing by Caller ID requires software 4.93+.
Product Description