Download Print this page

Beko UVT 1001 User Manual page 8

Ultraviolet and ultrasonic cleaner

Advertisement

Available languages

Available languages

1 Important safety and environmental instructions
Check if the mains voltage on
the type label corresponds to
your local mains supply. The
only way to disconnect the ap-
pliance from the mains is to pull
out the plug.
Keep the surface of the appli-
ance, control panel and switch
always clean and dry.
To clean the appliance, see the
"Cleaning and care" section.
Do not operate the appliance
without filling with water, other-
wise it will get damaged.
Do not let power cord hang over
sharp edges or hot surfaces.
Do not operate or place any
part of this appliance on or near
any hot surface, such as gas or
electric burners.
Do not use the appliance for any
purpose other than its intended
use. The appliance is designed
for cleaning jewelry, waterproof
watches, glasses, etc.; see
the " Which objects should be
cleaned " section.
Do not use the appliance with
wet hands.
8 / EN
Use the appliance on a stable
work surface.
Unplug the appliance before fill-
ing it. Do not exceed the "MAX"
marking when filling with water.
Do not place sensitive, small
objects directly in stainless
steel tank, otherwise they will
get scratched; use the plastic
cleaning basket for them.
Do not use strong cleansing
agents or chemicals, such as
caustic, ammonia, bleach, de-
tergents with strong perfumes,
in the appliance. Only works
with water.
Do not touch the inside of the
appliance and the cleaning liq-
uid while it operates.
WARNING: UV radiation is dan-
gerous for the eyes and skin. Do
not operate the UV-C lamp out-
side the product.
Do not operate the UV-C lamp
when it is removed from the
product enclosure.
This product contains a lamp
that emits UV rays. Do not stare
at the light source.
Ultrasonic Cleaner / User Manual

Advertisement

loading