Managing Phone Calls - Motorola iDEN i920 User Manual

Phone Calls

Managing Phone Calls

While a call is in progress, you can use menu commands for common tasks. Some of
these commands are available only when multiple calls are in progress or during a
conference call.
Use menu commands during a call
• Select Menu and then one of the commands described in the following table.
To
End the active call
Put the active call on hold
Activate the call on hold
Switch between 2 calls
Create a contact card for the caller
Join together all existing calls, if you have
subscribed to this service
Break one call out of a conference and make it
active while the rest of the conference is on hold
Turn the microphone off for the active call so the
other party cannot hear you, but you can still
hear the other party
Turn the microphone back on for the active call
so the other party can hear you
* If you have two active calls and you end one call, and then you attempt to Swap to another call, you will
disconnect the active call.
Use call management commands that are not on the menu
The following table describes other tasks that you can perform while on a call.
To
Put the current call on hold and answer an
incoming call
Send the incoming call to voice mail
End the active call
Turn the microphone off for the active call so the
other party cannot hear you, but you can still hear
the other party
Turn the microphone back on for the active call
so the other party can hear you
Switch between phone lines
• On the Home screen, press and hold # to switch between phone lines. This feature
is available if your phone supports 2 phone lines.
Note: If you are not provisioned for a second line and you set your line to line 2, you
will not be able to make or receive calls.
Select this menu command
End
Hold
Unhold
Swap*
Save to Contacts
Conference
Private
Select Mute.
Select Unmute.
Do this
Select Accept.
Select Reject.
Press e.
Select Mute.
Select Unmute.
43