Idle-Timeout - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Default
The command history buffer for a user line stores up to 10 history commands.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
size-value
range of 0 to 256.
Usage guidelines
Each user line uses a separate command history buffer to store commands successfully executed by
its user. The buffer size determines how many history commands the buffer can store.
To display history commands in the buffer for your session, press the up or down arrow key, or
execute the
history buffer, see CLI introduction in Fundamentals Configuration Guide.
Terminating a CLI session clears the commands in the command history buffer.
The setting in user line view takes effect immediately on the current session. The setting in user line
class view takes effect on login sessions that are established after the setting is configured.
Examples
# Set the command history buffer size to 20 for VTY line 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] history-command max-size 20

idle-timeout

Use
idle-timeout
Use
undo idle-timeout
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
Default
The CLI connection idle-timeout timer is 10 minutes.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
: Specifies the number of minutes, in the range of 0 to 35791.
minutes
: Specifies the maximum number of history commands the buffer can store, in the
display history-command
to set the CLI connection idle-timeout timer.
to restore the default.
command. For more information about the command
60