Safety Information WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This Tent is Made With Fabric That Meets CPAI-84 Specification For Flame Resistance. It is Not Fireproof. The Fabric Will Burn If Left In Continuous Contact With Any Flame Source.
Page 3
Extra Reminder:This gazebo has been created as a non-permanent structure. It is designed for sun shade and is not a shelter against ad- verse weather conditions. Do not use this gazebo in storms, hurricanes, typhoons, strong wind, and rain. Be aware that the water may sit and pool at the fabric canopy top after rain and may cause severe damage to the gazebo.
Informations de Sécurité AVERTISSEMENT: ÉLOIGNEZ TOUTES LES FLAMMES ET LES SOURCES DE CHALEUR DU TISSU DE LA TENTE. La Présente Tente est Fabriquée avec un Tissu Conforme à la Spécification CPAl-84 pour la Résistance aux Flammes. Elle N'est pas ignifuge. Le Tissu Brûlera En Cas de Contact Prolongé...
Page 5
Note supplémentaire:La présente canopée a été conçue comme une structure non permanente. Elle est conçue pour servir de pare-soleil et non comme un abri contre les mauvais temps. Ne pas utiliser cette canopée en cas de tempête, typhon, orage, vent fort ou pluie.
Pre-Assembly Pré-assemblage PLANNING ASSEMBLY PLANIFICATION DE L’ASSEMBLAGE Il faut être au moins deux personnes pour compléter le processus It will take minimum two people to complete the assembly process. d’assemblage. Un escabeau sera requis pendant l’assemblage. A free-standing ladder is needed during the assembly. HARDWARE INCLUDED QUINCAILLERIE INCLUSE NOTE:...
Pre-Assembly (continued) Pré-assemblage (suite) PACKAGE CONTENTS CONTENU DE L’EMBALLAGE Pièce Description Qté Part Description Post A1 Montant A1 Montant A2 Post A2 Montant B1 Post B1 Montant B2 Post B2 Poutre Beam Shelf D1 Tablette D1 Tablette D2 Shelf D2 Toit long Long Roof Short Roof...
Page 8
Assembly Assemblage ÉTAPE 1. Fixation de la poutre STEP 1. Attaching beam 1.Fixez le montant A1/montant A2 sur la poutre C avec un 1. Attach Post A1/Post A2 to Beam C with Bolt (M6x55) AA. boulon (M6x55) AA. 2. Attach Post B1/Post B2 to Beam C with Bolt (M6x55) AA. 2.Fixez le montant B1/montant B2 sur la poutre C avec un boulon (M6x55) AA.
Page 9
Assembly (continued) Assemblage (suite) ÉTAPE 2. Montage du châssis principal STEP 2. Setting up the main frame 3. Attach Post A2/Post B2 to Short Roof F with 3.Fixez le montant A2/montant B2 sur le toit court F avec un Bolt (M6x55) AA. boulon (M6x55) AA.
Page 10
Assemblage (suite) Assembly (continued) STEP 3. Attaching the roof frame ÉTAPE 3. Fixation du châssis du toit 5. Attach Long Roof E to Short Roof F with 5.Fixez le toit long E sur le toit court F avec un boulon Bolt (M6x28) BB.
Page 11
Assembly (continued) Assemblage (suite) STEP 4. Attaching the ÉTAPE 4. Fixation de la tablette shelf 7. Attach shelf D1 to Post A1/Post B1 with Bolt (M6x15) CC. 7.Fixez la tablette D1 sur le montant A1/montant B1 avec un boulon (M6x15) CC. 8.
Page 12
Assembly Assemblage ÉTAPE 5. Assemblage de l’auvent STEP 5. Canopy assembly 9.Placez délicatement l’auvent H sur le châssis 9. Gently place the Canopy H over the roof frame. du toit. 10. Hammer Anchor DD through one of the holes 10.Enfoncez l’ancrage DD dans un des trous sur at each post base into the ground to la base de chaque montant dans le sol, afin de stablize the gazebo.
Page 16
SKU: 6414-257 Code: 15ZJ11121003 SKU: 6414-257 Code: 15ZJ11121003 Email: support@casualwayliving.com Adresse courriel: support@casualwayliving.com Home Hardware Stores Limited Home Hardware Stores Limited 34 Henry Street West, St. Jacobs, Ontario, 34 Henry Street West, St. Jacobs, Ontario, Canada N0B 2N0 Canada N0B 2N0...
Need help?
Do you have a question about the ARAWAK 6414-257 and is the answer not in the manual?
Questions and answers
Is there a place we can purchase a new canopy.