ATS SuperTrak GEN3 Operation And Maintenance Manual page 318

Appendix C: Component Data Sheets
Specification
Minimum pitch from
center-to-center of
two (2) pallets (as
measured along the flat
rail)
Payload
a
Repeatability
Speed (max.)
Maximum tilting angle
306
Applicable For
Straight section
(with bumpers)
Straight section
(without bumpers)
180 deg (500 mm)
section
180 deg (800 mm)
section
90 deg. section
Pallets
Straight section (X-
axis)
Straight section (Y-
axis)
Straight section (Z-
axis)
Curved sections (X,
Y, and Z-axis)
Straight section
a
Curved section
Pallets
d
2-Magnet Assembly 3-Magnet Assembly
167 mm (6.57 in.)
154 mm (6.06 in.)
175 mm (6.89 in.)
163 mm (6.42 in.)
163 mm (6.42 in.)
See Pallet Linear Acceleration Vs. Payload
on page 308, Pallet Linear Acceleration Vs.
Payload on page 308, and
Recommendations
±0.01 mm (±0.00039 in.)
±0.015 mm (±0.00059 in.)
±0.025 mm (±0.00098 in.)
±0.025 mm (±0.00098 in.)
4 m/s (13.1 ft./s)
4 m/s (13.1 ft./s)
0.377°
SuperTrak™ GEN3 System Operation and Maintenance Manual
Value
200 mm (7.87 in.)
200 mm (7.87 in.)
200 mm (7.87 in.)
200 mm (7.87 in.)
200 mm (7.87 in.)
Pallet Magnet
on page 309.
Rev. 9 (12-2021)