Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Druck UNIK 5 00 Series
Summary of Contents for Druck UNIK 5 00 Series
- Page 1 UNIK 5*00 Series Pressure Sensing Platform Instruction Manual Druck.com...
- Page 3 The sensor must be maintained using the manufacturer's procedures and these should be carried out by authorized service agents or the manufacturer's service departments. Druck.com For technical advice contact the manufacturer. A qualified technician must have the necessary technical knowledge, documentation, special test equipment and tools to carry out the required work on this equipment.
- Page 4 This symbol, on the equipment, indicates a warning and that the user should refer to the user manual. Druck is an active participant in Europe’s Waste Electrical and Electronic Equipment (WEEE) take-back initiative (directive 2012/19/EU). The equipment that you bought has required the extraction and use of natural resources for its production.
-
Page 5: Table Of Contents
Contents Introduction Manufacturer Description Purpose Technical Specifications Design and Principle of Operation Markings Installation & Operation General Requirements Safety Measures Connecting to a Pressure Source 3.3.1 Media Compatibility 3.3.2 Pressure Containment Power Requirements Maintenance 3.5.1 Visual Inspection 3.5.2 Cleaning Returned Goods Procedure 3.6.1 Safety Precautions 3.6.2... - Page 6 Copyright 2022 Baker Hughes Company. iv | UNIK 5*00 Series–English...
-
Page 7: Introduction
Telephone: +44 116 231 7100; Fax: +44 116 231 7103 Internet: Druck.com Under the instruction of Druck Limited, the pressure sensors may also be manufactured in China Baker Hughes Sensing & Inspection (Changzhou) Co., Ltd. Building 9A, Jintong International Industrial Park, No. 8 Xihu Road, Wujin High-Tech Industrial Zone, Changzhou, Jiangsu 213164, China. -
Page 8: Technical Specifications
UNIK pressure sensors are optionally available with certification permitting their use in explosive atmospheres. 2.2 Technical Specifications Refer to the appropriate UNIK 5*00 data sheet for technical specifications and explanation of the product model number. Model numbers appended with a four or eight-digit alphanumeric string denote the use of a customer-specific specification drawing indicating the use of additions or deviations to the data sheet specification. -
Page 9: Markings
******** [10] Temp. Range: °C [11] [12] DRUCK LTD. GROBY, LE6 0FH, UK [13] MADE IN ***** Figure 2: Identification, Electrical and Pressure Markings Product name: ‘UNIK 5000’ Product description: ‘Pressure Sensor’ CAUTION: To install and use this equipment, read, understand and comply with this document. -
Page 10: Installation & Operation
3. Installation & Operation CAUTION Until installation, keep the unit in the original container with all the covers in position. The container and covers prevent contamination and damage. When not in use, keep the connections covered. WARNING High pressures, temperatures and potentially poisonous pressure media are dangerous, and can cause injury to personnel and damage to property and the environment. -
Page 11: Connecting To A Pressure Source
medium to be measured is liquid. If there are water hammers in the system, it is recommended to use a sensor complete with a hydraulic shock dampener. To reduce the temperature acting on the isolation diaphragm when measuring vapor pressure, it is recommended to use impulse tubes. -
Page 12: Media Compatibility
3.3.1 Media Compatibility The media compatibility of the product is shown in Table 1. Table 1: Media Compatibility Product Pressure Range Media Compatibility 5000 0 – 200 bar (0 – 2900 psi) Fluids compatible with stainless steel 316L and Hastelloy C276. 201 –... -
Page 13: Pressure Containment
Table 1: Media Compatibility (Continued) Product Pressure Range Media Compatibility 5700 Fluids compatible with titanium grades 2, 4 and 5. Notes: For pressure connector option PW: immersion fluid must be compatible with Kynar. For electrical connector options N and P: immersion fluid must be compatible with Kynar. -
Page 14: Power Requirements
3.4 Power Requirements The sensor should be connected to a compliant stable power supply. The power supply must be energy-limited to a maximum of 4.2 A. The power supply requirements for the sensor are shown in Table 3 and Table 4. Table 3: Supply Voltage Product Output Type... -
Page 15: Maintenance
The quality of the power supply and monitoring equipment will directly affect the EMC performance of the entire system. Since Druck Limited has no control over the installation of the sensor it must remain the responsibility of the user to ensure that the EMC performance of the system is adequate. -
Page 16: Cable Type
To minimize the effect of nearby circuits and events, it is necessary to use screened cable between the sensors and power supply/monitoring equipment. Failure to do so will invalidate the EMC tests conducted by “Druck”. The choice of cable type should reflect the environment through which it is going to run. Screened cable should always be used where electrical noise is present. - Page 18 Office Locations Services and Support Locations Copyright 2022 Baker Hughes Company. This material contains one or more registered trademarks of Baker Hughes Company and its subsidiaries in one or more countries. All third- party product and company names are trademarks of their respective holders. bakerhughes.com 145M6250 Revision - | English...
Need help?
Do you have a question about the UNIK 5 00 Series and is the answer not in the manual?
Questions and answers