Page 1
F4 PROJECT User Manual Use and Maintenance Please read the instructions carefully before handling, installing and using your home appliance so as to prevent any damage to yourself and to your washing machine WWW.SANGIORGIOELETTRODOMESTICI.IT INFO@SANGIORGIOELETTRODOMESTICI.IT...
Page 2
IMPORTANT OPERATIONAL INSTRUCTIONS Carefully read the instruction booklet PHASE 1 : REMOVAL OF FIXING SCREWS Fig.2 Fig.1 Remove the screws include spacers by pulling outward (Figure 2.) PHASE 2 : WATER CONNECTION PHASE 3 :PLACEMENT Cabinet Locking Leveling feet Place the washing machine on a non-elevated level or Check for leaks after connection to the water supply.
Page 3
Dear Customer, First of all we would like to thank you for choosing us and purchasing an original Italian product. This product has been fully manufactured in ITALY with the best materials, in ac- cordance to RoHs and Reach regulations with special attention to human health and environment.
Page 4
YOUR CONTRIBUTION TO THE PROTECTION OF THE ENVIRONMENT DISPOSING OF PACKAGING in high R&D investments which are required in the fi elds of ecology. The packaging has the purpose of protecting For the waste management and disposal of the good from any possible damage which the household appliances, the manufacturer could occur during transport operations.
SAFETY INSTRUCTIONS AND WARNINGS This washing machine complies washing cycle a day. Some with current safety norms and example are: regulations. If improperly used, it • staff kitchen areas in shops, can provoke damage to people offi ces and other working and/or goods around you.
be sure that the power supply Children under the age of 3 must be supervised while the appliance is in line with the data (power, frequency) indicated in the is in function. technical data label. If any doubt, CAUTION! consult a qualifi ed electrician. When washing at high The electrical safety of temperature, be aware...
possible damage that could arise. If without a prior authorization by the not properly repaired, the user may manufacturer. Before connecting be exposed to serious danger, for the draining hose to the sink, which the manufacturer cannot be make sure that the water is easily held liable.
Page 9
the damaged parts may damage the garments. Garments that have been pre-treated with solvents or products containing solvents, have to be carefully rinsed with clean water before washing in the appliance. Never use detergents with solvents (i.e. petrol, trichloroethylene). These products may damage some components of the appliance and produce toxic vapors which could potentially...
INSTALLATION GENERAL INFORMATION Seal the holes with the appropriate caps provided as shown in fi gure 3. The assembled group of the appliance is Figure 3 secured by 4 fi xing screws (which protect it during handling and transport operations), fi gure 1.
WATER SUPPLY INLET HOSE After regulating the feet, since vibration may modify its level, it is advisable to tighten the docking nut on the feet until it is blocked as The water supply inlet hose has to be connected to a cold water tap with threaded shown by the fi gure below.
WATER DRAINAGE ELECTRICAL CONNECTION The appliance is supplied with a The water drain hose can be positioned in three different ways (Figure 9): power cable and a schuko plug for the connection to the ~ 230V 50Hz 1. On the edge of a sink, using a U-hook AC grid .
Page 13
THIS APPLIANCE REQUIRES AN If the wall sucket is not available, it is the EARTH WIRING. customer’s responsibility and obligation to install it by a qualifi ed electrician. For individual personal safety and of the environment, this appliance must be Do not change/modify the electrical connected to the mains with an earth- power cord and do not use adaptors or...
DESCRIPTION OF CONTROLS 1. Programme Knob 7. Option Confirmation The Programme selector Knob allows you to This button allows to confirm the selected select the required programme and turn off the options. appliance by setting it to OFF. It can be turned clockwise and counterclockwise to have an 8.
F4 Advance/Star Model F4 LED Model OPTIONS OPTION PRE-WASH PRE-WASH The pre-wash function is used to make a low The pre-wash function is used to make a low temperature wash before the main wash with temperature wash before the main wash with the aim of removing stains.
M I N I M U M Wash options Wash options Temperature control panel laundry laundry allowed, Spin speed F4 Led F4 Advance/Star (Standard Cotton load (kg) load (kg) Cold Max °C and Laundry. load) 5 Kg 1 - Cotton 6 Kg 1h 37 min.
Page 19
M I N I M U M Temperature Wash options Wash options control panel laundry laundry allowed, Spin speed F4 Led F4 Advance/Star (Standard Cotton load (kg) load (kg) Cold Max °C and Laundry. load) 5 Kg 1h 48 min.
Page 20
PROGRAMMES TECHNICAL DATA UE 2019/2023 REGULATION Consumption values for 5kg washing machine Residual Maximum Energy Water con- humidity (%) Wash Duration temperature Programmes consump. sump. load (h:min) for 5 min. (kWh/cycle) (l/cycle) 1000 rpm (°c) Cotton 20°C 1:43 0,20 Cotton 60°C + 2:35 1,20 prewash...
Page 21
Consumption values for 8kg washing machine Residual Maximum Energy Water humidity (%) Wash Duration temperature Programmes consump. consump. load (h:min) for 5 min. 1200 1400 (kWh/cycle) (l/cycle) (°c) Cotton 20°C 1:45 0,22 Cotton 60°C + 2:35 1,43 prewash Cotton 90°C 2:45 2,15 Synthetics 60°C...
PRODUCT DATA SHEET IN ACCORDANCE WITH EU DIRECTIVE 2019/2023 Maximum temperature Remaining moisture Class Spin speed (rpm) Energy Water of treated fabrics (C°) content (%) Nominal weigh Energy consumption consumption TYPE capacity remain class Eco 40-60 Eco 4060 (kg) moist (kWh/cycle) (l/cyclc) cont...
Page 23
Programme duration s of Power consumption (W) Dimensions (cm) Noise Class Ions (hour:min) hted Type of emission in of noise release ning installa- Stand-by Delay spinning emis- during Stand-by ture tion in rete start (db) sion washing tent 3:08 2:30 2:30 0,08 0,35...
Page 24
TYPE - MODEL ASSOCIATIVE TABLE The various association of machine type-model-QR is only for EU market and clients. Hence, it is not reported in these section. The association is requested by the European Product Database for Energy Labelling (EPREL) directive. Where necessary an supplementary sheet will be added.
Page 25
Programme sequence Rinse Spin Wash programme Model F4 LED Model F4 ADVANCE - STAR Intermediate Final (The last rinse (The last rinse takes softener) spin spin takes softener) Cotton 2 + 1* 2 + 2* Eco 40-60 2 + 1*...
LAUNDRY SYMBOLS FOR WASHING MACHINE The number inside the basket indicates the maximum temperature at which laundry can be washed. Icon Description Icon Description Normal wash Delicate wash 60° 95° max 90° - 95° C max 60° C Normal wash Delicate wash 40°...
INSTRUCTIONS AND WARNINGS WASHING INSTRUCTIONS LAUNDRY SELECTION • The appliance shall not be used by children To ensure you are getting the best from your or vulnerable persons without appropriate washing machine, clothing shall belong to one supervision. of the following types: •...
LOADING LAUNDRY LIQUID DETERGENT BULKHEAD IN- SERT To get the best washing results, it is necessary to place the laundry in the drum, one item To use the liquid detergent, it is necessary to at a time thus preventing it from knotting put the bulkhead insert provided in the kit with and twisting.
STARTING WASHING CYCLE After achieving all above mentioned operations, it is possible to start washing pressing the Start/Pause button. PAUSE WASHING It is possible to stop the washing cycle by pressing the button Start/Pause. This way, the appliance switches to pause mode. To turn off the machine in order to change programme, turn the knob n°...
MAINTENANCE CABINET Figure 16 It is recommended to clean the cabinet of the appliance with lukewarm water thus preserving its original brightness for a long time. During the cleaning of fl oors, absolutely avoid appliance coming into contact with detergents and/or corrosive cleaning agents to maintain the original shininess unchanged over time, avoiding areas of rust.
EMPTYING PROCEDURE Reinsert the drain fi lter and tighten it fi rmly until it locks. Place a tray between the cabinet and the end of the fi lter. Figure 18 Warning! If you do not rein- sert the fi lter or you do not screw it until it is blocked, the water will come out of the machine.
Page 33
Figure 21 Electro-valve Filtro tubo fi lter elettrovalvola Water inlet Filtro tubo hose fi lter carico Rubber Guarnizione gasket Extraction water inlet hose fi lter* Extraction water valve fi lter *Before extracting the fi lter from the wateinlet hose, remove the gasket indicated in fi gure 21.
POSSIBLE SOLUTIONS Most part of malfunctions which occur during the daily use of your appliance can be solved by yourself within a few minutes. In many cases, it is possible to save time and money without necessarily calling the authorized after-sale service. The following table is a valuable help to identify and possibly eliminate malfunctions, in any other case please call the after-sale service.
Page 35
Problem Diagnosis Possible Solution • Check whether the plug is properly inserted into the power socket. THE WASHING • Check whether there is power at the MACHINE DOES socket. NOT START • Verify the selector knob is not positioned on OFF. THE WASHING MACHINE DOES NOT START THE...
Page 36
Problem Diagnosis Possible Solution (lights n° 2-3-4-5- • Switch off the washing machine and 6 flashing) switch it back on °C (lights n° 2-4-5-6 • Switch off the washing machine and flashing) switch it back on °C • Make sure the red light is off •...
Page 37
SERVICE APRÈS-VENTE REPAIR Many problems can be solved independently by the user using the information on the faults re- ported in these instructions or available on our website www.sangiorgioelettrodomestici.it. If this is not possible, please contact our customer service. We always fi nd an adequate solution and try to avoid unnecessary visits by service technicians.
(art. 132 of Consumer Code), and only when the malfunction does not depend on a vice of conformity, SANGIORGIO IT Wash may ask the reimbursement of the cost to the consumer – always reasonable and previously indicated –...
Page 39
b) Operations of installation and assembly (for example: fault connection/power supply; lack of the protective earth connection; inadequate water supply/drain; removal of the fi xing brackets on the tub; any possible regulation such as the fl oor level under the household appliance). c) An incorrect, improper or incomplete installation, lack of capacity to use by the Consumer or Installer, if there is no enough place to operate around the product (at least 3 cm on the upper side, 8 cm on both sides and 8 cm on the rear) or excessively high/low temperature of the environment (in case the...
Page 40
Due to the continuous technological evolution of the products, the data contained in this manual may undergo slight variations without the manufacturer’s prior notice. 396010718**...
Need help?
Do you have a question about the F4 ADVANCE and is the answer not in the manual?
Questions and answers