Safran CORTEX RTR NeXt Series User Manual page 54

6. The MCS software is the Graphical
User Interface used to configure the
receiver. At start-up, a default file is
loaded; it automatically connects to
the local SPS as Client-Server
applications. This could take a few
seconds.
7. Once the connection to the server is
established....
8. The MCS software receives
monitored data from the SPS every
200ms. It compares it to its MCS
configuration.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
User's Manual
Default file : D:\ZDS\Data\CrtxMCS\cortex-nt.mcs
Waiting for connection :
Connection established
If monitored data is identical to MCS configuration
=>
If monitored data is different from MCS configuration
=>
The different parameters have a yellow background
=>
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104004
Is.Rev 07
Previous Ref.: DTU000567
Date: 21/06/2021
Toolbar Tabulation
Safran Data Systems
.
Status bar
Page 54