Dahua DHI-ITC952-AF3F Web Operation Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Camcorder
  5. DHI-ITC952-AF3F
  6. Web operation manual

Dahua DHI-ITC952-AF3F Web Operation Manual

Hd intelligent enforcement camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD Intelligent Enforcement Camera
Web Operation Manual
V1.0.2
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DHI-ITC952-AF3F and is the answer not in the manual?

Questions and answers

Related Manuals for Dahua DHI-ITC952-AF3F

Summary of Contents for Dahua DHI-ITC952-AF3F

  • Page 1 HD Intelligent Enforcement Camera Web Operation Manual V1.0.2 ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

  • Page 2: Foreword

    This manual introduces the web operations of the HD intelligent enforcement camera (hereinafter referred to as the "Camera"). Models HD Intelligent Enforcement Camera Business Type DHI-ITC952-AF3F ANPR, E-Police, Yield to Pedestrians DHI-ITC952-AF3F-IR7 ANPR, E-Police, Yield to Pedestrians ANPR, E-Police, Yield to Pedestrians...
  • Page 3 Web Operation Manual Version Revision Content Release Time V1.0.1 Updated model information and cybersecurity recommendations. September 2021 V1.0.0 First release. September 2021 Privacy Protection Notice As the device user or data controller, you might collect the personal data of others such as their face, fingerprints, and license plate number.

  • Page 4: Table Of Contents

    Web Operation Manual Table of Contents Foreword ................................I 1 Web Introduction............................1 First-time Login ................................... 1 Login ....................................... 2 Logout ......................................3 Password Reset ................................... 3 Web Functions ..................................... 4 2 Live ................................. 6 Video Stream ....................................6 Live View ......................................6 Plate Number Recognition ..............................
  • Page 5 Web Operation Manual 5.4.2 Configuring Electronic Police ..........................36 5.4.3 Configuring ANPR Snapshot........................... 46 5.4.4 Configuring OSD ................................. 54 5.4.5 Configuring Traffic Flow Analysis .......................... 56 5.4.6 Cutout ..................................... 56 5.4.7 Device Direction ................................57 5.4.8 Alarm ....................................57 5.4.9 Abnormality .................................. 59 Peripheral ....................................

  • Page 6: Web Introduction

    Web Operation Manual Web Introduction After mounting the Camera (see details in the user’s manual of the all-in-one enforcement camera), power on the Camera, connect it to the network and configure its settings, then you can get the desired detection results. The actual page might vary depending on the model you purchased and the version of software.

  • Page 7: Login

    Web Operation Manual Figure 1-2 Login Step 7 On the Login page, enter the username (admin) and the password that you set, and then click Login. Figure 1-3 Live page For first-time login, click Please click here to download and install the plug-in, and then Step 8 install the plug-in.

  • Page 8: Logout

    Web Operation Manual Step 1 Enter the IP address of the Camera in the browser address bar, and press Enter. Enter username and password on the displayed page, and then click Login. Step 2 A box pops up when the username or password is incorrect. See Figure 1-6. ...

  • Page 9: Web Functions

    Web Operation Manual Figure 1-5 Reset password Step 6 Click Next. Set Password, and enter your new password again in Confirm Password. Step 7 The new password must consist of 8–32 characters, and contain at least two types  from upper cases, lower cases, numbers and special characters (excluding ' " ; : and &). The new password must be the same as the Confirm Password.
  • Page 10 Web Operation Manual Operation Description You can search for images, traffic flow information, and records on this page. See "4 Query Query". You can configure the way that the Camera works, the rules for detecting violations, and Setting the internet protocol for camera network connection. You can also view version and system information of the Camera.

  • Page 11: Live

    Web Operation Manual Live The Live page is displayed after you successfully log in to web. On this page, you can view the live video image and the captured number plate, take snapshots, view event details, and more. Figure 2-1 Live Table 2-1 Description of live page Description...
  • Page 12 Web Operation Manual : Adjust the image to original size or appropriate window.  : Click it to switch to big window. Click it again to exit big window.  Figure 2-2 Big window : Click it to open image adjustment window on the right, meanwhile the button turns ...

  • Page 13: Plate Number Recognition

    Web Operation Manual Table 2-2 Image adjustment Icon Name Description Adjust the overall image brightness. Change the value when the image Brightness is too bright or too dark. The range is from 0 to 128 (64 by default). Change the value when the image brightness is suitable, but contrast is Contrast not enough.

  • Page 14: Vehicle Snapshot

    Web Operation Manual Table 2-3 Function description of the Live page Icon Name Description Select the checkbox, and the Camera automatically receives vehicle snapshots and detects event information triggered by ANPR sources such as radar or video detection, and displays such Receive snapshots and information at the lower part of the page.

  • Page 15: Event List

    Web Operation Manual Event List Select ANPR Receive, and the event information will be displayed, including number, event types, capture time, lanes, plates, vehicle color, speed, vehicle signs, and vehicle types.

  • Page 16: Playback

    Web Operation Manual Playback Click the Playback tab, and then you can play back video recordings stored on the TF card of the Camera. To set the record strategies, see "5.6.6 Record Control". Figure 3-1 Playback Table 3-1 Functions Description Description Video playback Record type...

  • Page 17: Viewing Recordings

    Web Operation Manual Table 3-2 Video playing description Icon Function Description : The video is paused or not being played.  Play and pause : The video starts playing.  Stop Stop playing video. Play by frame Play by frame. Slow Slow down.

  • Page 18: Record Type

    Web Operation Manual Figure 3-4 Playback file Table 3-3 Playback file description Parameter Description Search for all the video files within the selected period. Click it to download files to local. Click it to go back to the calendar page, where you can search and play back videos of other periods.

  • Page 19: Query

    Web Operation Manual Query You can search for snapshots, vehicle flow, and video recordings on the Query page. Image Search 4.1.1 Searching for SD Card Image On the SD Card Image page, you can search for and download the images stored in the TF card of the Camera.

  • Page 20: Downloading Attribute

    Web Operation Manual Parameter Description Select the Speed Range checkbox, and set the speed range to search for images of Speed Range vehicles within the defined speed range. Record The length of a recorded video associated with the snapshot that you want to save. Interval Select the Plate checkbox, and then enter the plate number to search for images Plate...

  • Page 21: Pc Picture

    Web Operation Manual Figure 4-2 Downloading attribute 4.1.3 PC Picture You can view images saved on your PC and verify whether the image contains a watermark. To view or set the save path of images on your PC, go to Setting > Storage > Destination > Save Path.

  • Page 22: Recording Search

    Web Operation Manual The function is available on select models, and might differ from the actual product.  This section uses Traffic Flow Query as an example.  Select Query > Flow Query > Traffic Flow Query (select Pedestrian Flow Query if you Step 1 want to search for pedestrian flow).
  • Page 23 Web Operation Manual The function is available on select models, and might differ from the actual product.  Select Query > Recording Search > Recording. Step 1 Click Browse to select the recorded video on your PC, and then you can play back the video. Step 2 Figure 4-5 Record...

  • Page 24: Watermark

    Web Operation Manual 4.3.2 Watermark Verify the watermark of selected video recordings. Only .dav recording is supported. Before verifying the watermark, you need to select Watermark Settings and configure Watermark Character from Setting > Camera > Video > Video > Main Stream. The watermark character is DigitalCCTV by default.

  • Page 25: Settings

    Web Operation Manual Settings You can configure camera attributes to make the Camera clearly display the monitoring image of the scenario, set the detection rules to make the Camera detect violations (such as running a red light, not yielding to pedestrians, and speeding, and more), set the network parameters of the Camera, and view device and system information.
  • Page 26 Web Operation Manual Table 5-1 General parameters Parameter Description Both the darker areas and the brighter areas will be changed together when  adjusting the brightness. The image might become blurry when the value gets Brightness bigger. The recommended range is 40–60, and the available range is 0–100. It is 50 by default.
  • Page 27 Web Operation Manual 5.1.1.2 Configuring Shutter You can configure shutter mode, exposure mode, and gain mode. Select Setting > Camera > Camera Attribute > Shutter. Step 1 Figure 5-2 Shutter Step 2 Click Video Shutter, Snap Shutter, or Recognition Shutter to show the parameters related to the shutter.
  • Page 28 Web Operation Manual Parameter Description Picture You can change the scene and adjust the sharpness of the corresponding scene. Scene Scenes available: Dawn/Dusk, Daytime, and Night. You can set the sharpness of the corresponding scene. Sharpness The higher the value, the clearer the image. But there will be noise if the sharpness is too high.
  • Page 29 Web Operation Manual Figure 5-3 Metering zone Step 2 Configure the parameters. Table 5-3 Metering zone parameter description Parameter Description Plate Light When selecting On, you can turn ON backlight and frontlight according to scene Backlight requirements to improve the backlight and frontlight image brightness. Frontlight Global Measure: Measure the brightness of the whole image area and ...

  • Page 30: Video

    Web Operation Manual Figure 5-4 Focus Step 2 Configure the parameters. Table 5-4 Description of focus parameters Parameter Description The type of the Camera lens. Select Manual to restart the Camera when the Lens Type lens is not standard. Zoom Drag the slider to zoom in or out the video image at the selected speed.
  • Page 31 Web Operation Manual Figure 5-5 Video stream Step 2 Configure the parameters. Table 5-5 Video stream parameter Parameter Description Encode Mode Modes of H.264M, H.264H, MJPEG, and H.265 can be selected. The higher the value, the clearer the overall image. For each resolution, the recommended bit stream value is different.
  • Page 32 Web Operation Manual Parameter Description You can verify the watermark to check whether the video has been tampered. Select the Watermark Settings checkbox to enable watermark verification. The Watermark watermark character is DigitalCCTV by default. Settings Watermark character consists of up to 85 characters with numbers, letters and underlines.

  • Page 33: Network

    Web Operation Manual Parameter Description customized) of custom information OSD. You can add up to 5 custom titles. Step 3 Click Confirm. 5.1.2.3 Interest Area Set the region of interest in the video image, and then the selected image will be displayed with the configured quality.
  • Page 34 Web Operation Manual Some models are designed with two network ports. Do not configure the ports to be on the same network segment; otherwise, the network might fail. Select Setting > Network > TCP/IP. Step 1 Figure 5-8 TCP/IP Step 2 Configure the parameters.

  • Page 35: Port

    Web Operation Manual 5.2.2 Port 5.2.2.1 Configuring Port You can set the port information, so you can access the Camera through different protocols or configuration tools. Select Setting > Network > Port > Port. Step 1 Figure 5-9 Port Step 2 Configure the port number of the Camera for each protocol.

  • Page 36: Configuring Auto Registration

    Web Operation Manual Figure 5-10 ONVIF 5.2.3 Configuring Auto Registration When the Camera is connected to the network, it will automatically report its location to the server specified by the user. This helps client software to access the Camera through the server for viewing and monitoring the live video.

  • Page 37: Remote Device

    Web Operation Manual Remote Device Remote device (such as enforcement camera or IP camera) information will be displayed on the Remote Device page if any of such devices is in use. You can enable the remote device to work with the Camera to capture events.

  • Page 38: Intelligent Scheme

    Web Operation Manual 5.4.1 Intelligent Scheme 5.4.1.1 Switching between E-police and ANPR You can switch the working mode of the Camera between E-police and ANPR. ANPR is applicable to road sections without signal lights to detect violations such as speeding, ...
  • Page 39 Web Operation Manual Select Setting > Event > Intelligent Scheme > Blocklist and Allowlist > Fuzzy Matching. Step 1 Select On to enable the allowlist. Step 2 Select Fuzzy Matching to enable fuzzy matching. Step 3 Step 4 Configure matching rule. Matching Character: The specific digit(s) that should be exactly matched.
  • Page 40 Web Operation Manual Set the start time and end time to add the plate number in the allowlist. The plate number will be outside of the allowlist beyond this time period. Select the plate color, vehicle type, plate type and vehicle color. Enter the owner of vehicle.

  • Page 41: Configuring Electronic Police

    Web Operation Manual Figure 5-18 Blocklist search 5.4.2 Configuring Electronic Police Configure e-police parameters. Make sure that you have set Intelligence Scheme to E-Police. For details, see "5.4.1.1 Switching between E-police and ANPR". 5.4.2.1 Configuring Violation Capture Configure the video detection parameters for detecting traffic violations. Follow this order to configure violation capture: Rule config >...
  • Page 42 Web Operation Manual 5.4.2.1.1 Rule Configuration You can select the traffic violation types and configure the corresponding parameters of the images of the captured vehicle. Select Setting > Event > Electronic Police > Illegal Capture > Rule Config. Step 1 Figure 5-20 Rule configuration (1) Step 2...
  • Page 43 Web Operation Manual Category Name Description Picture Select picture resolution. Resolution Quality Select the level of picture quality. Image Size Limit the size of the picture. Copy to Copy the current picture configuration to the same-type rules or all the rules. After selecting an option from Copy to, click Copy.
  • Page 44 Web Operation Manual Table 5-10 Advanced parameter description (1) Category Name Description Trigger Source Loop Unavailable (The way to Video Analyse The system analyzes the live video to detect traffic violations. trigger vehicle Once a violation is detected, the system automatically capture) captures images of the offending vehicle.
  • Page 45 Web Operation Manual Table 5-11 Lane property description (1) Parameter Description Road Direction The direction of the lane. RoadDirection The geographical direction of the lane. Upload By Pri: Captures and reports all violations of vehicles on the lane.  Upload Violation Upload All: When the vehicle triggers multiple violations, the Camera ...
  • Page 46 Web Operation Manual To clear the lane lines or regions that you have drawn, click Table 5-13 Lane line description (1) Parameter Description Each lane needs to have two lane lines, shown as blue lines with arrows. The LaneLine arrow indicates the direction in which the vehicles travel. The drawn lines should go along the actual lane line.
  • Page 47 Web Operation Manual Figure 5-25 Line or region types (1) Table 5-14 Car detect description (1) Parameter Description Region The region of detection. Car Region The region for detecting vehicle volume. Calibration Area The region for analyzing vehicle traffic. Used to verify the accuracy of calibration results. Click Line Segment Calibration to draw the calibration segment in the Line Segment...
  • Page 48 Web Operation Manual Parameter Description When the travelling speed exceeds this value, the system automatically Max Speed changes the vehicle speed to a random value in the normal range. Click Draw Target, and then draw a rectangular area on the image to show Pixel Counter the pixel size of that area.
  • Page 49 Web Operation Manual Parameter Description External Signal: Synchronize external traffic light signals such as signal  LightGroup detectors and traffic light detectors to the current traffic lights. Signal Network Signal Lights: Synchronize the traffic light scheme of the traffic  signal controller to the current traffic lights.
  • Page 50 Web Operation Manual 5.4.2.2.3 Recognition Select Setting > Event > Electronic Police > Intelligent Analysis > Recognition. Step 1 Figure 5-29 Recognition (1) Step 2 Configure parameters. Table 5-18 Recognition parameters (1) Parameter Description Identifies motor vehicle sign and vehicle type. Select the options that you Motor Vehicle need to recognize.

  • Page 51: Configuring Anpr Snapshot

    Web Operation Manual 5.4.2.2.5 Intelligence Default Select Setting > Event > Electronic Police > Intelligent Analysis > Intelligence Default. Step 1 Click Default to restore settings including lane property, violation capture and intelligent Step 2 business to default. 5.4.3 Configuring ANPR Snapshot Configure ANPR parameters.
  • Page 52 Web Operation Manual Figure 5-32 Rule config (2) Step 2 Click , and then configure picture parameters. The parameter table describes the parameters involved in all event types, and might differ from the actual page. Figure 5-33 Configure picture parameter (2) Table 5-19 Picture parameter (2) Category Name...
  • Page 53 Web Operation Manual Category Name Description Copy to Copy the current picture parameter setting to the same-type rules or all the rules. After selecting an option from Copy to, click Copy. Snapshot Feature Region Centering on the vehicle, enter the height and width of the and Picture close-up of the vehicle.
  • Page 54 Web Operation Manual Category Name Description capture) Video Analyse The system analyzes the real time video to detect traffic violations. Once a violation is detected, the system automatically captures images of the offending vehicle. Copy to Copy the current setting to the same-type rules or all the rules.
  • Page 55 Web Operation Manual Parameter Description Distance Between Lane The distance between the bottom of the video image and the stop line (where Reference Line the traffic post is). And Stop Line Roadway Code The code of the roadway and route. Route Code Click Confirm.
  • Page 56 Web Operation Manual Table 5-23 Lane line description (2) Parameter Description Each lane needs to have two lane lines, shown as blue lines with arrows LaneLine indicating the direction in which the vehicles travel. The drawn lines should go along the actual lane line. Detect Line The line that will trigger vehicle capture if reached.
  • Page 57 Web Operation Manual Figure 5-38 Other settings (2) Step 2 Configure parameters. Table 5-25 Other settings description (2) Parameter Description Radar Calc Speed Use radar to measure vehicle speed. Snap Match Common Mode: Recommended for the ANPR snap mode.  Mode Priority Mode: Recommended for the e-police mode.
  • Page 58 Web Operation Manual Figure 5-39 Recognition (2) Step 2 Configure parameters. Table 5-26 Recognition parameters (2) Parameter Description Identify motor vehicle characteristics, driver characteristics, and window Motor Vehicle objects NonMotor Identify non-motor vehicle attributes such as type, helmet, and rider number. Plate enhancing Enhance number plate image effect.

  • Page 59: Configuring Osd

    Web Operation Manual Figure 5-40 Custom algorithm (2) Step 2 Configure custom algorithm. Step 3 Click Confirm. 5.4.3.2.3 Intelligence Default Step 1 Select Setting > Event > ANPR Snap > Intelligent Analysis > Intelligence Default. Click Default to restore settings including lane property, violation capture and intelligent Step 2 business to default.
  • Page 60 Web Operation Manual Step 4 Configure OSD parameters. Table 5-27 Snapshot OSD description Parameter Description Select an OSD option, click Insert Before, and then select another OSD option. The Insert Before new OSD option will be inserted before the original one. Select an OSD option, click Insert After, and then select another OSD option.

  • Page 61: Configuring Traffic Flow Analysis

    Web Operation Manual 5.4.5 Configuring Traffic Flow Analysis 5.4.5.1 Traffic Data You can configure the lane and the period of traffic flow statistics, and then the flow data will be displayed in the Traffic Flow Data and Pedestrian Flow Data tabs. Select Setting >...

  • Page 62: Device Direction

    Web Operation Manual Click Confirm. Step 3 Figure 5-43 Snap cutout (ANPR mode) 5.4.6.2 Face Overlap Configure whether to enable overlapping face picture on the snapshots. If overlap is enabled, you can configure the overlap position and size of driver face and front-seat passenger face. Select Setting >...
  • Page 63 Web Operation Manual 5.4.8.1 Relay Activation You can connect the alarm output device to corresponding I/O port. Step 1 Select Setting > Event > Alarm> Relay Activation. Figure 5-44 Relay activation Step 2 Select the Enable checkbox to enable alarm input. Step 3 Configure the parameters.

  • Page 64: Abnormality

    Web Operation Manual Figure 5-45 Period setting Click Confirm. Step 4 5.4.8.2 Relay-out You can simulate to trigger alarm output signal. Step 1 Select Setting > Event > Alarm> Relay-out. Step 2 Click NO1 or NO2 to configure one-channel alarm output. Step 3 Click Trigger to trigger alarm output.
  • Page 65 Web Operation Manual Security Exception: Alarm will be triggered when security problem occurs.  Traffic Light Fault: Alarm will be triggered when the Camera detects traffic light fault.  You can set the alarm tone by selecting Alarm at the upper-right side of the Camera’s web page. ...

  • Page 66: Peripheral

    Web Operation Manual Peripheral 5.5.1 Extra Device Status Select Setting > Peripheral > Extra Device Status, and then you can view the information related to the external device. 5.5.2 Serial Port Settings This section displays all serial ports of the Camera, and integrates all devices which can be connected so you can configure them on one page.
  • Page 67 Web Operation Manual Figure 5-49 Radar configuration (single lane) Configure radar parameters. Table 5-30 Description of important parameters of the radar Parameter Description Start Lane The number of lanes on which the radar has been enabled. Select the work mode of the radar from Speed Measure Mode, Calculate Mode, Work Mode Single, Continuous and Manual.
  • Page 68 Web Operation Manual Figure 5-50 Radar configuration (multiple lanes) Click Confirm. Positioning  Select Go to. Figure 5-51 Positioning configuration Select the positioning method from GPS and BeiDou as needed. Click Confirm. External Light  Select External Light. Figure 5-52 External light configuration Configure external light parameters.

  • Page 69: Light Configuration

    Web Operation Manual Table 5-31 Important external light parameters description Parameter Description Protocol Select from Flashing Light, Strobe and Continuous Light. Device No. Choice Select device number as needed. Device No. Select external light number based on the selected device number. Check Status Select Yes to enable external light status check.
  • Page 70 Web Operation Manual Figure 5-54 Light config Step 2 Configure parameters. Table 5-32 Illuminator parameter description Parameter Description Select the light type connected to each port. F1/2/3/4/5/6/7 The light type must be the same as the actual connected light type. Otherwise, the light might be damaged.

  • Page 71: Storage

    Web Operation Manual Storage You can configure the storage path of snapshots and video records. 5.6.1 Point Set the storage path of snapshots and video recordings. Select Setting > Storage > Destination > Point. Step 1 Figure 5-55 Point Step 2 Select storage path as needed.

  • Page 72: Ftp

    Web Operation Manual Figure 5-56 Local 5.6.3 FTP FTP function can be enabled only when TF card is inserted and FTP server is enabled. Only snapshots can be saved to the FTP server. Select Setting > Storage > Destination > FTP. Step 1 Figure 5-57 Step 2...

  • Page 73: Client

    Web Operation Manual Table 5-33 FTP parameters Parameter Description When the network disconnects or fails, snapshots will be stored in TF card. After the network is restored, the snapshots will be uploaded from the TF card to FTP or Offline Transfer client.

  • Page 74: Save Path

    Web Operation Manual Table 5-34 Client parameters Parameter Description When the network is disconnected or fails, the Camera stores the snapshots to its TF card (when TF card is inserted), and it will automatically upload the stored snapshots to platform server after the network resumes. Offline Transfer When selecting Offline Transfer, Manual Upload option will be displayed, and...

  • Page 75: Record Control

    Web Operation Manual 5.6.6 Record Control You can set how to record the videos and the stream for recording the videos. Select Setting > Storage > Record Control. Step 1 Step 2 Select the record mode. Auto: Record videos only when a traffic violation event is detected. ...
  • Page 76 Web Operation Manual Figure 5-60 General Step 2 Configure the parameters. Table 5-36 General setting parameters Parameter Description The device serial number consisting of letters, numbers, underlines and Device SN strikethroughs. Device Code No. of the Camera. The device code cannot be overlaid with OSD information. Language of web browser page.

  • Page 77: Account Management

    Web Operation Manual Figure 5-61 Date & time Step 2 Configure the parameters. Table 5-37 Date & time parameters Parameter Description Select the date format. Three formats are available: YYYY-MM-DD, MM-DD-YYYY and Date Format DD-MM-YYYY. Time Format Select the time format. Two formats are available: 24-Hour and 12-Hour. Time Zone The time zone where the Camera is located.
  • Page 78 Web Operation Manual 5.7.2.1 Account Management Rules The system manages both users and user groups. You can set up to 8 user groups and 18 users.  The factory settings cover two groups: User and admin. Group name cannot be repeated, so is the username. Each user must be placed in a group, and ...
  • Page 79 Web Operation Manual Figure 5-63 Add user Figure 5-64 Set log restriction You can also:...
  • Page 80 Web Operation Manual Delete a user: Click to delete the corresponding user.  Modify user information: Click corresponding to the user. You can modify information such  as username, password, email address, group name, and memo. Click Save to save the settings. Figure 5-65 Modify user Change password: On the Modify User page, select the Modify Password checkbox.
  • Page 81 Web Operation Manual Item Evaluation 0: No special characters.  Special 10 points: 1 special character.  character 25 points: More than 1 special character.  Categories: Upper case letters, lower case letters, numbers and special characters. 2 points: A combination of two categories. ...
  • Page 82 Web Operation Manual Delete a group: Click to delete the corresponding group.  Modify group information: Click corresponding to the group, and then you can  modify the memo and authority of the group. Click OK after configuration. Figure 5-68 Modify group The admin and user groups cannot be deleted.
  • Page 83 Web Operation Manual ONVIF User Management You can view ONVIF user information, add or delete user(s), and modify user password. Select Setting > System > Account > Onvif User. Step 1 Figure 5-69 Onvif user Step 2 Manage ONVIF users. Add ONVIF user: Click Add User, and then you can configure user information such as ...

  • Page 84: Safety

    Web Operation Manual Modify password: On the Modify User page, select the Modify Password checkbox.  Enter the old and new passwords, and confirm password. Click Save after configuration. Configure the password according to the password strength prompt. The new password must be 8–32 characters and contain at least two of the following types of characters: Numbers, upper case letters, lower case letters and special characters (excluding ' "...
  • Page 85 Web Operation Manual Parameter Description Transmission Encryption Make sure that the matched device or software supports the video  decryption function. We recommend enabling the encryption service to avoid data leak.  Enable this function to encrypt stream transmitted through standard protocol.
  • Page 86 Web Operation Manual Figure 5-74 HTTPS setting Configure the region, and IP address or domain name of the Camera, and then click Create. Step 3 The system prompts Operation succeeded! when it is done. Click Install to install the certificate. Step 4 The system prompts Operation succeeded! after installation, and the information of the HTTPS certificate will be displayed in Attribute.
  • Page 87 Web Operation Manual Figure 5-76 Certificate Click Install Certificate…, and then click OK. Figure 5-77 Certificate import wizard Click Next.
  • Page 88 Web Operation Manual Figure 5-78 Certificate store Click Next. Figure 5-79 Select certificate store Select Trusted Root Certification Authorities, and then click OK.
  • Page 89 Web Operation Manual Figure 5-80 Completing the certificate import wizard Click Finish, and then it prompts The import was successful. Click OK. Step 7 Select the Enable HTTPS checkbox, and then click OK. The Camera will restart. Wait for a few minutes, and then log in again. Installing Signed Certificate Select Setting >...

  • Page 90: Default

    Web Operation Manual Click Browse corresponding to Certificate Key Path to select the private key file of the Step 3 certificate. Step 4 Install the root certificate. For details, see Step 6 of "Creating Certificate." Select the Enable HTTPS checkbox, and then click OK. Step 5 Step 6 Wait for a few minutes for the Camera to restart, and then log in again.

  • Page 91: Import/Export

    Web Operation Manual 5.7.5 Import/Export The system supports exporting the configurations from the web to local PC, and importing the configuration files from local backup. Select Setting > System > Import/Export. Step 1 Figure 5-84 Import/Export Step 2 Click Import or Export. Import: Import the configuration files from local backup.

  • Page 92: System Upgrade

    Web Operation Manual 5.7.6.2 Emergency Maintenance Step 1 Select Setting > System > Auto Maintain > Emergency Maintenance. Step 2 Select On to enable emergency maintenance. Click Save. Step 3 5.7.7 System Upgrade You need to update the firmware to the latest version to make the Camera run properly. Import the update file in the format of .bin to the system, and then update the system.

  • Page 93: Log

    Web Operation Manual Figure 5-87 Version 5.8.2 Log 5.8.2.1 System Log You can search for and view logs by the time and type, and backup the logs. The log type includes All, System, Setting, Data, Event, Record, Account, and Safety. Step 1 Select Setting >...

  • Page 94: Online User

    Web Operation Manual 5.8.2.2 Remote log Critical logs can be saved to the log server. This helps provide important clues to the source of security incidents. The log server needs to be deployed in advance by a professional or system administrator.

  • Page 95: Legal Information

    Web Operation Manual 5.8.5 Legal Information Select Setting >System Info > Open Source Software Notice to check the legal information.

  • Page 96: Alarm

    Web Operation Manual Alarm Select Alarm at the upper-right corner of the web page, and then you can select the event type to trigger an alarm, and also configure the sound of the alarm. The alarm type might differ depending on the device model. Figure 6-1 Alarm (ANPR) Table 6-1 Alarm parameters...

  • Page 97: Faq

    Web Operation Manual Table 7-1 FAQ Question Solution Device error, unable to start Press and hold the Reset button for 5 seconds to restore the Camera to or operate normally factory settings. Stop recording and image capturing, and then wait for at least 15 TF card hot swapping seconds before removing the TF card.

  • Page 98: Appendix 1 Allowlist Format

    Web Operation Manual Appendix 1 Allowlist Format Fields in the allowlist include start time, time of cancellation, owner’s name, license plate color,  license plate number, license plate type, vehicle color, type, and more. Appendix Figure 1-1 Allowlist format template The license plate number must not exceed 12 characters, and the vehicle owner's name must ...
  • Page 99 Web Operation Manual Vehicle Color Number Green Blue Brown Black Other Appendix Table 1-6 Arm type number Arm Type Number Annual inspection overdue Stolen & robbed vehicle Hit and run vehicle Traffic violation Other After filling in the information and creating the excel template file, save the file in .csv format ...

  • Page 100: Appendix 2 Cybersecurity Recommendations

    IP video surveillance is not immune to cyber risks, but taking basic steps toward protecting and strengthening networks and networked appliances will make them less susceptible to attacks. Below are some tips and recommendations from Dahua on how to create a more secured security system.
  • Page 101 Web Operation Manual using. Enable HTTPS We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing.
  • Page 102 Web Operation Manual More information Please visit Dahua official website security emergency response center for security announcements and the latest security recommendations.

This manual is also suitable for:

Dhi-itc952-af3f-ir7Dhi-itc952-af3f-ir8Dhi-itc952-rf2d-ir7Dhi-itc952-rf2d-ir8Dhi-itc352-af3fDhi-itc352-af3f-ir7 ... Show all

Table of Contents