Air-Vac DRS27 User Manual page 18

DRS27 User's Guide
Rapid: Used to select rapid function
of joystick. Default=off. When
pressed, joystick pilot light will be
blinking.
0027.00.902
Probe Vacuum Port
Ground
Joy Stick Pilot Light:
Off - Indicates joy stick is not active
On - Indicates joy stick is active\
Blinking – Indicates Rapid function is activated
Chapter 1: Introduction/Overview
E-Stop
Joy Stick Control: Controls positioning of
x/y-axis, z-axis, theta, and zoom mode,
determined by select button.
Select: Sets joystick control of:
X/Y-axis: vision alignment camera con-
trol, corners, edge and center position-
ing
Z-axis: nozzle control, up, down posi-
tioning
Theta: nozzle control, clockwise,
counterclockwise positioning
Zoom: vision alignment camera magnifi-
cation control
1-12