Advertisement
Quick Links
Bianco RainsaverMK3E Installation and Operating Instructions
Bianco RainsaverMK3 is WaterMark Level 1 approved to ATS5200.477:2006 Certificate No.
23022 and incorporates internal dual check valve back flow prevention for the mains water.
INSTRS110110 rev 5 01/01/14
Page 1
Advertisement
Related Manuals for bianco RainsaverMK3E
Summary of Contents for bianco RainsaverMK3E
- Page 1 Bianco RainsaverMK3E Installation and Operating Instructions Bianco RainsaverMK3 is WaterMark Level 1 approved to ATS5200.477:2006 Certificate No. 23022 and incorporates internal dual check valve back flow prevention for the mains water. INSTRS110110 rev 5 01/01/14 Page 1...
- Page 2 Mains water is also connected to the RainsaverMK3 as an automatic back up should rain water level be too low, or if there is a power or pump* failure). *Should there be a pump failure, mains back up is achieved by turning the RainsaverMK3E off at the power point.
- Page 3 The RainsaverMK3E can be Wall mounted or Pump Mounted i.e. mounted directly onto a pressure pump outlet. The steel wall mounting bracket, which is connected to your RainsaverMK3E, can be rotated to allow the unit to be wall mounted in either direction, or may be removed for pump mounting.
- Page 4 4.22 Pump Mounting: RainsaverMK3E can be mounted directly onto the outlet of the pump with the adaptor supplied. If another size threaded port is found on the pump or controller outlet use quality standard plastic threaded pipe fittings to adapt.
- Page 5 4.4 Filtration and Water Quality The Bianco Rainsaver MK3E is designed to operate on clean rainwater and clean mains water supply, and as such, the rainwater tank should be fitted with an inlet strainer, preferably shaded type to reduce algae, and a suitable first flush device.
- Page 6 In conjunction with this manual, read and understand the installation and maintenance manual for the water pump that is to be connected to the RainsaverMK3E. The RainsaverMK3E and any pump connected to it are not to be used by children or infirm persons and must not be used as a toy.
- Page 7 Float switch is not installed correctly. Note* Should there be a pump failure, mains back up is achieved by turning the RainsaverMK3E off at the power point. For after sales service please contact White International Customer Service: 1300 783 601.
- Page 8 8. Pumps Pumps and pump controllers must be accessible and fitted with barrel unions for service and maintenance. It is recommended that all surface mounted pumps be protected from the elements with a suitable pump cover. Submersible pump accessories such as pump stands, high inlets, floating suction hose kits assist in the pumping cleaner water that is found at higher levels in the rainwater tank.
- Page 9 Installation Dimensions INSTRS110110 rev 5 01/01/14 Page 9...
- Page 10 Typical Installations. DAB or BIANCO surface mounted pumps. INSTRS110110 rev 5 01/01/14 Page 10...
- Page 11 TESLA DIVERxxxMPCX Submersible Pump INSTRS110110 rev 5 01/01/14 Page 11...
- Page 12 BIANCO JH8003PMPCX or B42A Submersible Pumps INSTRS110110 rev 5 01/01/14 Page 12...
- Page 13 DAB DIVERTRON1200 Submersible Pump INSTRS110110 rev 5 01/01/14 Page 13...
- Page 14 Accessories Pump Cover protects pump from the elements. Pump stand for submersible pumps lifts pump up to pump cleaner water. DAB Divertron X conversion kit allows pumping from higher level and connection to floating suction kits to pump cleaner water higher in the tank. INSTRS110110 rev 5 01/01/14 Page 14...
- Page 15 Accessories Tesla DiverDry conversion kit allows pumping from higher level and connection to floating suction kits to pump cleaner water. Floating suction hose kits allow pumping from cleaner water higher in the tank. Float switch for bladder tank. Piggy back float switch option for Divertron. INSTRS110110 rev 5 01/01/14 Page 15...
- Page 16 INSTRS110110 rev 5 01/01/14 Page 16...
Need help?
Do you have a question about the RainsaverMK3E and is the answer not in the manual?
Questions and answers