Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Creative Cedar Designs Manuals
  4. Play Sets & Playground Equipment
  5. Woodlands 3681
  6. Owner's manual and assembly instructions

Creative Cedar Designs Woodlands 3681 Owner's Manual And Assembly Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual
And
Assembly Instructions
For FSC certified products
look for the FSC label
199 6 Forest Ste wardship Council A.C.
Woodlands
Model: 3681

Advertisement

loading
Need help?

Need help?

Do you have a question about the Woodlands 3681 and is the answer not in the manual?

Questions and answers

Related Manuals for Creative Cedar Designs Woodlands 3681

Summary of Contents for Creative Cedar Designs Woodlands 3681

  • Page 1 Owner's Manual Assembly Instructions For FSC certified products look for the FSC label 199 6 Forest Ste wardship Council A.C. Woodlands Model: 3681...

  • Page 2: Table Of Contents

    Thank you for purchasing a Creative Cedar Designs Playcenter. We hope it will bring you and your children many years of safe and enjoyable backyard fun. Table of Contents Letter to Customer Positioning Your Playcenter Tools Required for Assembly Helpful Installation Hints...
  • Page 3 STOP…PLEASE READ!! IF YOU HAVE ANY QUESTION OR ARE MISSING A PART, PLEASE DO NOT CONTACT THE RETAILER THAT YOU PURCHASED THIS PRODUCT FROM. PLEASE VISIT www.creativecedardesigns.com OR CONTACT US DIRECTLY AT OUR OFFICE, 1-888-363-4967. WE WILL ANSWER YOUR QUESTIONS, OR HELP WITH WHAT YOU NEED. For more efficient service, please log onto our websites at www.creativecedardesigns.com...
  • Page 4 r. W WARNING: This symbol points out important safety the personal safety of yourself your your property. You MUST foll manual before attem y enter. WARNING: Children must NOT use this playcenter until unit has been completely assembled and inspected by an adult to insure set has been properly installed.

  • Page 5: Positioning Your Playcenter

    The instructions and owner’s manual for your new Playcenter should be read in its entirety before assembly, to minimize problems and safety issues. We recommend reading the owner’s manual thoroughly after you have identified all of the parts for your Playcenter as discussed in the Helpful Installations Hints section below.

  • Page 6: Helpful Installation Hints

    8. Swing hangers should be buried past the threads, so that the loop is against the swing beam. Creative Cedar Designs is not responsible for incorrect installations of swing hangers. Failure to properly install swing hangers may cause severe injury.
  • Page 8 4 occupants on the swing area, who have a 350 pounds for a total unit cpacity of 10 occupants who combined 770 pounds. total (this weight is not including the...

  • Page 9: Maintenance Instructions

    Maintenance Instructions: 1. Check all nuts and bolts twice monthly during the usage season and tighten as required. (But not so tight that you crack the wood) We recommend you check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season.
  • Page 10 APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material Also see the following website for additional information: https://www.cpsc.gov/PageFiles/122146/324.pdf...
  • Page 13 (14) (2) WD115 - Wall Rail - 11/16 X 3 1/2 X 5 1/2...
  • Page 14 (2) WD139 - Wall Rail - 11/16 X 3 1/2 X 33...
  • Page 15 (6) GREENL-BRACKET-M003 (2) GREEN ANGLE (2) 100º TRIANGLE PLATE - M100 BRACKET (5’’) - M005 (1) SMALL FORT TARP (2) 4 COUNT BAGS CLIMBING ROCKS (1) LARGE FORT TARP (GREEN) - PT015 (GREEN) - P016 BP011-GYBR w/ HARDWARE (1 - PAIR) SAFETY HANDLE (3) 2 COUNT STD SWING HANGER BP 002 (1) NAME PLATE BP 007-Y w/ HARDWARE...
  • Page 16 1 1/4” Deck Screws #6DS1 1/4 a2a. (5) 5/16 x 2 Hex Head Bolt 5/8 Tapping Screws 5/16 x 2 1/4 Hex Head Bolt 5/16 x 1 3/4 Hex Head Screws 5/16 x 4 Socket Truss Head Bolt 5/16 x 2 1/4 Hex Head Screws 5/16 x 3 Hex Head Screws 5/16 T-Nut 1 Truss Head Screws...
  • Page 17 Lock Washer i5. (58)
  • Page 18 WD119 WD118 WD117 WD116 WF108 WF109 WD128 WD126 WD127 WD125 WD123 WD124 WE111 WD127 WD122 WD121 WQ101 WQ120 WD103 WD104 WQ102...
  • Page 19 WD106 WF129 WS135 WC113 WC113 WD110 WE112 WQ136 WD139 WQ137 WD134 WC132 WD107 WD105 WF133 WD131 WD138 WD130...
  • Page 20 *Lay out both WQ101 as illustrated. *Attach three WD121 into the pre-drilled holes with bolts “d4” and then secure with screw “c3” *Attach three WF109 into the pre-drilled holes with bolts “d4” and then secure with screw “c3” *Attach WD116 into the pre-drilled holes with bolts “d4” *Turn the wall over and attach WD105 into the predrilled holes with bolts “d5a”...
  • Page 21 *Lay out both WQ102 as illustrated. *Attach two WD131 into the pre-drilled holes with bolts “d5” and then secure with screw “c4” *Attach three WF109 into the pre-drilled holes with bolts “d4” and then secure with screw “c3” *Attach WD129 into the predrilled holes with bolts “d5a” *Attach two WD116 into the pre-drilled holes with bolts “d4”...
  • Page 22 i5. (8)
  • Page 24 *Attach two WD115 and two WD139 into the pre-drilled holes bolts “d6” *Attach both WD107 with screws “c3” WD139 (2) WD107 - Tower Rail - 11/16 X 3 1/2 X 31 1/2 i5. (4) (2) WD115 - Wall Rail - 11/16 X 3 1/2 X 5 1/2 (2) WD139 - Wall Rail - 11/16 X 3 1/2 X 33...
  • Page 25 T-nuts...
  • Page 26 (2) 1-1/4’’ Hex Head Bolts (1) Flat Washer per bolt for small rocks (1) Lock Washer per bolt (2) 1-1/2’’ Hex Head Bolts for large rocks *Line up each rock with the one hole & mark the second hole. Drill 3/8 "...
  • Page 27 i5. (2)
  • Page 29 T-nuts i5. (2) a2a.
  • Page 30 *Pre-drill holes with a 1/8” drill bit 1-3/4’’ Wood Screw & Flat Washer 1/8’’ Pilot Hole Safety Handle 1-3/4’’ Wood Screw 8” & Flat Washer PLEASE REFER TO ACCESSORY PLAN FOR INSTALLATION INSTRUCTIONS (1 - PAIR) Safety Handles BP007-Y...
  • Page 31 *Pre-drill 1/8 Pilot Holes It is flush to the inside edge of the uprights, not to the outer edge. 56-1/8...
  • Page 32 *Lay out both WQ120 *Attach the WD121 on the bottom with bolts d4 and then secure with screws c3 *Attach WD123 on top with bolts d4 *Turn the wall over and attach the remaining two WD121 with bolts d4 and then secure with screws c3 i5.
  • Page 33 i3. (6) i5. (2)
  • Page 36 *Create the small tarp support frame by attaching WD128 and WD126 with screws a3. *Insert T-Nut as shown. *Attach WD125 to WD123 as shown with screw a2a and hex head bolt d3. *Attach the pre-assembled frame to WD125 with screws a3 and screws a2a. * Note: WD128 will overhang WD125 by 5/8’’.
  • Page 37 * Lay the small tarp over the small tarp support. * Make sure the tarp is centered and pulled taught before securing with screws and washers on the outside of the brace. Attach Tarp Screws and washers in these locations. 1-1/4 TARP FROM...
  • Page 38 * Lay the large tarp over the large tarp support. * Make sure the tarp is centered and pulled taught before securing with screws and washers on the outside of the brace. Attach Tarp Screws and washers in these locations. 5/8 tapping screw &...
  • Page 39 (3) 1" Truss Head Screws 1" Truss Head Screws...
  • Page 40 T-nuts NOTE: High edge of WQ136 goes towards the inside of the swing assembly i5. (3)
  • Page 41 STEP 1 STEP 2 SWING SEAT STEP 3 INSTALLATION T-Nut RING-TRAP INSTALLATION Fig. 1 Fig. 2 * Attach Quick Links to chain as shown in (1). * Attach Quick Links to Rings as shown in (2). * Attach Trapeze Bar as shown. BP 002 * Tighten all Quick Links fully closed with a suitable wrench, as shown.
  • Page 42 i5. (4) (1) NAME PLATE w/ HARDWARE...
  • Page 43 FLAT WASHER 1-1/2’’ LAG BOLT METAL STRAP ANCHOR (4) Anchor (4) Anchor Strap (4) 1-1/2’’ LAG BOLT (4) FLAT WASHER BP001-B...

  • Page 44: Limited Warranty

    LIMITED WARRANTY Creative Cedar Design (CCD) offers many fun, interactive, and safe play sets. We only guarantee the original purchaser that this product is free of defects for 30 days from the date of purchase. The product registration card, along with a dated purchase receipt, must be returned to CCD within 30 days. Within a 30 day period, CCD will repair or replace, at our option, defective merchandise free of charge, provided that the defective part is a manufacturer’s defect and not seasonal check.

  • Page 45: Warranty Claim Procedure

    3. Photos of warranted parts and of the entire play system. If any of the above steps are not completed, there may be delays in the completion of your claim, or possibly warranty cancellation. Mail information to: Creative Cedar Designs 2700 Riverside Dr Chattanooga, TN 37406 Or email at custservice@creativecedardesigns.com...
  • Page 46 PRODUCT REGISTRATION CARD Please complete this Product Registration Card along with a copy of the receipt and return to Creative Cedar Designs, within 30 days of original purchase in order to validate time of purchase for warranty. Or register at www.creativecedardesigns.com Name:________________________________________________________________ Address: _______________________________________________________________ City, State, Zip Code: ___________________________________________________...
  • Page 47 Please complete this Product Registration Card along with a copy of the receipt and return to Creative Cedar Designs, within 30 days of original purchase in order to validate time of purchase for warranty. FOLD HERE Place Stamp Here Creative Cedar Designs 2700 Riverside Dr. Chattanooga, TN 37406...