Philips 43PUS8505/12 Service Manual page 24

For (9xx5 Series)
1. Remove all fixation screws [2] that secure the Back cover assy.
2.Unplug the connectors that marked by red box below from SSB, and take the cables from the clips in yellow circuit
3.Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
2
2
2
2
2
2
2
2
(9xx5 series)
3.2.4 IR Board Control Unit
1. Release the connector from the SSB Board.
Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors!
2. Remove all the fixation screws from the IR and keyboard control panel [2] and take it out from the Back cover.
When defective, replace the whole unit.