Set Audit Log; Configuring Machine Certificates; Set Ipsec - Dell C7765dn Supplementary Manual

6
Click [Apply].

Set Audit Log

Follow the procedure below to configure the Audit Log settings.
1
Click [Security] on the [Properties] screen.
2
Click [Audit Log].
3
Check the [Enabled] box for [Audit Log].
4
Click [Apply].

Configuring Machine Certificates

Import the Certificates for SSL, IPSec, S/MIME.
1
Click [Security] on the [Properties] screen.
2
Click [Machine Digital Certificate Management].
3
Click [Upload Signed Certificate].
4
Enter a file name for the file you want to import, or select the file to be imported by
clicking [Browse].
5
Enter [Password], and enter [Retype Password].
6
Click [Import].

Set IPSec

Before setting [Digital Signature] for [IKE Authentication Method], import an IPSec
certificate according to the same procedure as "Configuring Machine Certificates"
(P.18).
1
Click [Security] on the [Properties] screen.
2
Configure the [Preshared Key] settings or [Digital Signature] settings using the
following procedures.
To use Preshared Key
1) Click [IPSec].
2) Check the [Enabled] box for [Protocol].
3) Select [Preshared Key] for [IKE Authentication Method].
This is used to ensure secure communication between the machine and a client
computer or server.
4) Enter a Pre-Shared Key in the [Shared Key] and [Verify Shared Key] boxes.
Make sure the IPSec address is correct.
To use Digital Signature
1) Click [Certificate Management].
2) Select [IPSec] for [Certificate Purpose].
3) Click [Display the list], and check a desirable Certificate.
18