Figure 4-7 E-Mail Settings - NEC SL1100 Pc Programming Manual

NEC SL1100
___________________________________________________________________________________
___________________________________________________________________________________
PC Programming Manual
1. If the SL1100 is to get it's IP Address via DHCP, enable it by checking
DHCP Client Mode.
2. If the SL1100 is to have a static IP address, define the IP Address,
Subnet Mask, VoIPDB IP Address, VOIPDB Subnet Mask, Default
Gateway, NAPT Router, and NAPT Router IP Address.
3. When alarm reports are to be emailed, Define the DNS Primary and
Secondary addresses.
4. Define the DNS Primary and Secondary addresses for FTP Firmware
Update.
5. Define the NetBIOS Settings
6. If the PC Pro and Webpro ports need to be changed, change them in
PC/Web Programming Settings.
7. Define the VLAN Setup for the CPU port and VOIPDB Port.
E-Mail Settings
1. Define the SMTP settings, if InMail SMTP e-mail notification is used.
2. Define the POP3 settings if InMail POP3 e-mail notification is used.

Figure 4-7 E-Mail Settings

Issue 3.01
4 - 7