Yamaha DR2E17 Owner's/Operator's Manual page 34

J0C
MAINTENANCE
Do not disconnect the DC output
cord from the DC charger receptacle
when the charger is on or an arc
could occur that may cause an
explosion.
4. The charger will turn off
automatically when the batteries
reach full charge.
5. After the charger has turned off,
disconnect the DC output plug
from the DC charger receptacle
by grasping the plug body and
pulling the plug straight out of the
receptacle.
Battery Installation
When working with batteries, do not
put wrenches or other metal objects
across the battery terminals. An arc
can occur causing explosion of the
battery.
Y-751D
1. Install the battery holddown
plates and torque to 0.7-0.9
m•kg, 7-9 Nm (62-80 in•lb) as
shown.
å Forward
∫ Battery
ç Battery holddown plate
2. Connect the wire leads and
torque to 0.9-1.0 m•kg, 9-10 Nm
(80-89 in•lb) as shown.
Y-672h
1
2
3
4
5
6
7
8
9
10
11
7-6