Page 1 RS35 Mobile Computer Android™ 11 Version 1.00...
Page 2 The editorial use of these names is for identification as well as to the benefit of the owners, with no intention of infringement. CIPHERLAB logo is a registered trademark of CIPHERLAB CO., LTD. All other brands, products and services, and trademark names are the property of their registered owners.
Page 3: Important Notices
Important Notices IMPORTANT NOTICES FOR USA This equipment has been tested and found to comply with the limits for a digital Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
Page 4: For Product With Laser
FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID: Q3N-RS35 ...
Page 5 CE SAR Value (Standard limit is 2 W/Kg) EU (10g): Max. 1.440 W/Kg  Hereby, CIPHERLAB CO, declares that this RS35 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. URL: www.cipherlab.com Indoor restriction: In EU, 5150 to 5350MHz is restricted indoor.
Page 6: Important Safety Instructions And Warnings For Li-Ion/Polymer Battery
RS35 Mobile Computer IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS FOR LI-ION/POLYMER BATTERY It is important for users to be aware of the risks associated with lithium batteries.  Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below ...
Page 7: General Guideline And Warning
Important Notices GENERAL GUIDELINE AND WARNING Use specific Lithium Polymer/Li-ion charger from CipherLab only. Failure to do so may  cause fire, which may result in personal injury and property damage. Never charge batteries unattended. When charging Lithium Polymer/Li-ion batteries, ...
Page 8: Storage & Transportation
RS35 Mobile Computer STORAGE & TRANSPORTATION CipherLab battery is charged in manufacturing to around 30% of its full capacity. It is a  good capacity for long-term storage & transportation. Battery should NOT be stored in full-charged or full-discharge state; otherwise it will ...
Page 9: Product Warranty
Important Notices PRODUCT WARRANTY Product warranty is limited to original manufacturing defects in material only. Warranty will not apply to batteries with reduced capacity due to user scenario, unless determined to be a manufacturing flaw. Warranty does not cover collateral damage. Due Misuse, abuse, incorrect charging and other inappropriate use of this product are not covered under warranty.
Page 10: Safety Precautions
 Do not use any pointed or sharp objects against the screen surface.  Do not use the styluses which are not supplied or approved by CIPHERLAB CO., LTD.,  to prevent possible scratches to the touch screen. Water residue on the touch screen may cause abnormal behaviors or the fall of its ...
Page 11: Battery
Important Notices BATTERY The main battery may not be charged to full for shipment. Charge the main battery to  full before using the mobile computer for the first time.  The main battery powers the mobile computer to work. It takes Main battery: approximately 4 hours to charge an empty main battery to full.
Page 12: Scanner
RS35 Mobile Computer SCANNER  Scan a 1D barcode 1) Open and tap on the menu bar. ReaderConfig Scan Test 2) Aim the scanning window at the barcode to read. Move the device, having the barcode located in the center of the scanning area.
Page 13: Care & Maintenance
Important Notices CARE & MAINTENANCE This mobile computer is intended for industrial use. The mobile computer is rated IP65  /IP67, however, damage may be done to the mobile computer if it is exposed to extreme temperatures or soaked in water. When the body of the mobile computer gets dirty, use a clean, wet cloth to wipe off ...
Page 14: E-Label
RS35 Mobile Computer E-LABEL - 12 -...
Page 15: Ce Declaration
Important Notices CE DECLARATION - 13 -...
Page 16: Thailand Caution
RS35 Mobile Computer THAILAND CAUTION เครื ่ องโทรคมนาคมและอุ ป กรณ์ น ี ้ มี ค วามสอดคล ้องตามมาตรฐานหรื อ ข ้อก าหนดของกสทช. เครื ่ องวิ ท ยุ ค มนาคมนี ้ มี อ ั ต ราการดู ด กลื น พลั ง งานจ าเพาะ...
Page 17: Release Notes
Release Notes RELEASE NOTES Version Date Notes , 2022  Initial release 1.00 April 28 - 15 -...
Page 18: Table Of Contents
CONTENTS IMPORTANT NOTICES........................- 1 - For USA ............................- 1 - For Product with Laser ........................- 2 - Environment ..........................- 2 - Specific Absorption Rate (SAR) information ................- 2 - Important Safety Instructions and Warnings for Li-ion/Polymer Battery ........- 4 - General Guideline and Warning ....................
Page 19 CONTENTS USING RS35 MOBILE COMPUTER ....................42 2.1. Battery ........................43 2.1.1. Battery Status Indicators..................45 2.1.2. Monitor Battery Level .................... 47 2.1.3. Replace Main Battery .................... 54 2.1.4. Power Management ....................57 2.1.5. Battery Precautions ....................59 2.2. Memory ........................62 2.2.1.
Page 20 RS35 Mobile Computer 3.4.1. Suspend Device ....................125 3.4.2. Lock Device ......................126 3.5. OS Update ......................129 3.5.1. Network Update ....................129 3.5.2. SD Card Update ....................131 3.6. Back up Your Data ....................132 3.7. Reset to Factory Default..................134 3.7.1.
Page 21 CONTENTS CIPHERLAB UTILITIES ........................184 6.1. A-Demo ......................... 185 6.2. AppLock ........................ 187 6.3. Barcode To Setting ....................188 6.4. BT Printer Mate ....................194 6.5. Button Assignment ....................195 6.6. Enterprise Settings ....................196 6.7. HF RFID Configuration ..................197 6.8.
Page 22: Introduction
RS35 Mobile Computer INTRODUCTION mobile computer, powered by Android 11, is light-weight, easy to use, providing RS35 powerful and handy tools for the purpose of delivering flexibility in customization. Specifically designed to work as an industrial PDA, it provides rich options of data collection, voice and data communication, long-lasting working hours, and so on.
Page 23: Features
INSIDE THE PACKAGE The following items are included in the kit package. Save the box and packaging material for future use in case you need to store or ship the mobile computer. RS35 Mobile Computer  Snap-on Cable (optional) ...
Page 24: Related Documentation
RS35 Mobile Computer RELATED DOCUMENTATION Please visit to access related documentation about the RS35 mobile CipherLab website computer.
Page 25: Quick Start
Quick Start Chapter 1 QUICK START This chapter helps you get ready for starting using the mobile computer. IN THIS CHAPTER 1.1 Overview .................. 24 1.2 Charging & Communication ............. 33...
Page 26: Overview
RS35 Mobile Computer 1.1. OVERVIEW...
Page 27 Quick Start No. Description No. Description Power Button Status LED Touchscreen Microphone & Speaker USB-C Port with Cover Side-Trigger (Left) Volume Down Button Volume Up Button Scan Window Function Key Side-Trigger (Right) Battery Cover Latch Battery with Cover Hand Strap Hole Cover Camera NFC Detection Area Hand Strap Hole...
Page 28: Install/ Remove Battery
RS35 Mobile Computer 1.1.1. INSTALL/ REMOVE BATTERY For shipping and storage purposes, the mobile computer and the main battery are saved in separate packages. Note: (1) Any improper handling may reduce the battery life. (2) Always use a fully-charged main battery for battery replacement.
Page 29 Quick Start 2) Press both left and right side edges of the battery to make sure that it is firmly installed without any interstice. Click! Click! 3) Slide the battery latch leftward to “ ” position. Lock Slide leftward to “Lock” Unlock icon: Lock icon: The battery cover is now unlocked.
Page 30 RS35 Mobile Computer REMOVE BATTERY To remove the battery: 1) Slide the battery latch rightward to unlock it. Slide rightward to “Unlock” 2) Once the battery cover is unlocked, it slightly tilts up and is ready to be removed. By holding the two sides of the battery cover, lift up the main battery (which is with...
Page 31: Installing Sim Card, Sam Card And Memory Card
Quick Start 1.1.2. INSTALLING SIM CARD, SAM CARD AND MEMORY CARD The RS35 mobile computer is equipped with 2 SIM card slots (optional), 1 SAM slot, and 1 memory card slot. To insert the cards: 1) Remove the battery as described in Remove Battery 2) Lift up the inner lid that protects the card sockets chamber by holding the pull tab.
Page 32 RS35 Mobile Computer 3) After the chamber is revealed, insert SIM cards, the SAM card and the microSD card into their respective sockets. Close and push back the hinged cover till a click sounds. SIM 1 (optional) SAM (optional) SIM 2 (optional)
Page 33 Quick Start REMOVE CARDS To remove the cards: 1) Remove the battery. 2) Lift up the inner lid. 3) Unlock the card hinge cover and remove the card. 4) Mount the inner lid and the battery cover, and slide the battery latch back to the “Lock” position Note: Both SIM1 and SIM2 card slots support 2G/3G/4G cards.
Page 34: Power On/Off Mobile Computer
RS35 Mobile Computer 1.1.3. POWER ON/OFF MOBILE COMPUTER POWER ON To power on the mobile computer, press and hold the power button located on the top end of the device. The mobile computer will turn on and show the after splash Home Screen screen.
Page 35: Charging & Communication
Quick Start 1.2. CHARGING & COMMUNICATION 1.2.1. CHARGE MOBILE COMPUTER The main battery may not be charged to full for shipment. When you first receive the kit package, you will need to charge the main battery to full before using the mobile computer. You may use the Snap-on Charging Cable or Charging &...
Page 36 BATTERY STATUS & STATUS LED DURING CHARGE When RS35 mobile computer is connected with the external power source, the Status LED located above the touch screen shows as below: LED Status...
Page 37 RS35 mobile computer. Snap-on Cup 3) Push the Snap-on cup upwards to make its another side to be attached to the RS35 mobile computer. 4) A “click” sound is made once the Snap-on cable is connected with...
Page 38 RS35 Mobile Computer 5) Connect the USB plug to the approved adapter for external power connection, or plug it to the USB port of PC/laptop for data transmission/ charging. While the device battery is being charged, the LED on mobile computer will indicate charging status.
Page 39 Quick Start USE CHARGING & COMMUNICATION CRADLE The Charging & Communication Cradle charges your mobile computer and a spare battery at the same time, and it could also be used for data communication. Main Charging Station Spare Battery Compartment (Mobile Computer Compartment) LED Indicator Spare Battery Compartment Spare Battery Compartment...
Page 40 RS35 Mobile Computer To charge your mobile computer on the Charging & Communication Cradle: 1) Remove the USB Type-C cable if it is connected with the RS35 mobile computer. 2) Insert RS35 mobile computer onto the Cradle. The installed hard shell or hand...
Page 41 Quick Start The status of the mobile computer charging is shown on the device itself, while the LED indicator on RS35 Charging & Communication Cradle shows the status of battery charging as below: LED Indicator on RS35 Mobile Computer: Indicates the charging status of main battery.
Page 42: Wired Data Transmission
RS35 Mobile Computer 1.2.2. WIRED DATA TRANSMISSION Use a USB Type-C cable or the snap-on Cable or the cradle to connect the mobile computer to your PC for data transmission. 1) Connect your device to the computer with a USB Type-C cable/ Snap-on Cable / Cradle.
Page 43: Using Wireless Networks
Quick Start To change the USB usage after you leave “ ” page, please swipe down from USB Preferences the status bar to reveal , and then tap on the system notification “ Notifications Drawer ” or other USB usage notification just like this (depending on what file transfer turned on you chose last time) to enter “...
Page 44: Using Rs35 Mobile Computer
RS35 Mobile Computer Chapter 2 USING RS35 MOBILE COMPUTER This chapter walks you through the fundamental usage and features of this device. IN THIS CHAPTER 2.1 Battery ..................43 2.2 Memory .................. 62 2.3 Touch Screen ................78 2.4 Notifications ................87 2.5 Date and Time ................
Page 45: Battery
Using RS35 Mobile Computer 2.1. BATTERY MAIN BATTERY The mobile computer is powered by a rechargeable 3.85V, 4000mAh Li-Polymer battery pack, and it takes approximately 4 hours to charge it to full from the power adaptor (for the first time charging the main battery, please charge it for at least 8 to 12 hours).
Page 46 RS35 Mobile Computer Warning: (1) The battery cover must be secured in position with its latch locked. (2) For a new battery, make sure it is fully charged before using. (3) To avoid data loss, when replacing the main battery, make sure you replace it with a well- charged spare battery pack.
Page 47: Battery Status Indicators
Using RS35 Mobile Computer 2.1.1. BATTERY STATUS INDICATORS The main battery pack is the only power source for the mobile computer to work. Therefore, when the main battery level goes low, you need to replace the battery pack with a charged one or charge it as soon as possible.
Page 48 RS35 Mobile Computer The percentage beside the battery icon on the status bar can be switched on or off in Drawer (All Apps) Settings Battery Battery Percentage Note: When the mobile computer is fully charged and battery level reaches 100%, the battery icon will change from to indicate charging is completed.
Page 49: Monitor Battery Level
Using RS35 Mobile Computer 2.1.2. MONITOR BATTERY LEVEL MAIN BATTERY LEVEL The main battery is the only source that feeds the mobile computer to work. It also supplies the backup battery on the main board in order to retain the data stored in DRAM. When main battery level gets low, recharge it or replace it as soon as possible.
Page 50 RS35 Mobile Computer BATTERY SAVER MODE You can have the automatically turned on when the main battery gets Battery saver mode low. This mode will limit the use of location services, vibration and most background processing data. 1) On Battery screen, tap “...
Page 51 Using RS35 Mobile Computer By enabling “ ” on “ ” page, the battery saver mode Turn off when fully charged Battery Saver will be automatically off once the battery power is charged to be 90%. Tap on “ ” to directly enable battery saver function, and the battery icon on TURN ON NOW status bar will turn orange once this function is enabled.
Page 52 RS35 Mobile Computer Icon Description Battery saver mode is OFF. Battery saver mode is ON. Note: This mode will automatically become inactive when your device is being charged. BATTERY OPTIMIZATION With for the applications, you can make sure they stay Battery optimization enabled inactive when your device is idle or when they have not been used for days.
Page 53 Using RS35 Mobile Computer 2) Tap on any item under “ ” to enter its detail page. BATTERY USAGE SINCE FULL CHARGE 3) Tap on “ ”. Battery optimization...
Page 54 RS35 Mobile Computer 4) Tap on “ ” to open the dropdown list and select “ ”. All the NOT OPTIMED All apps optimized applications are listed. 5) You can individually turn off the optimization mode of a certain app if you would like it always activated by tapping on the app name and select “...
Page 55 Replace Main Battery LOW SUB BATTERY ALERT When the main battery’s power is drained out, RS35 mobile computer will automatically suspend by backup battery’s power for 5 minutes. When backup battery’s power is low, the “ ” notification will remind you to connect the device with an external Low Sub Battery power source to charge it immediately.
Page 56: Replace Main Battery
RS35 Mobile Computer 2.1.3. REPLACE MAIN BATTERY When main battery level is low, follow the steps below to replace the main battery. Note: Always use a fully-charged main battery for battery replacement. SHUT DOWN TO REPLACE THE MAIN BATTERY Shut the device down to replace the main battery, please: 1) Make sure the sub battery (backup battery) and the new main battery are fully-charged.
Page 57 Using RS35 Mobile Computer BATTERY SWAP RS35 backup battery supplies system power during battery swap. When battery cover is removed, the system will enter suspend mode and not wake up until battery cover is put back and the power button is pressed. Please refer to “...
Page 58 Thus, to prevent data loss, DO NOT replace the main battery when backup battery’s power is low. Please connect RS35 mobile computer with the external power source to charge it till the “Low Sub Battery” notification icon disappears from the status bar. Once the “Low Sub Battery”...
Page 59: Power Management
Using RS35 Mobile Computer 2.1.4. POWER MANAGEMENT For any portable device, power management is a critical issue especially when you are on the road. Below are some tips to help you save battery power. Warning: Using backlight, wireless connectivity, and peripheral devices while on battery power will substantially reduce battery power.
Page 60 RS35 Mobile Computer ENTER AIRPLANE MODE You can enable mode to have all the wireless radios (including call functions, data Airplane connections such as Bluetooth, Wi-Fi and 3G/4G) on your mobile computer turned off, which will considerably reduce the power consumption of your battery.
Page 61: Battery Precautions
”. Mode BATTERY MODE SELECTION If you need to use RS35 mobile computer while charging, or if the device needs to be connected with the power supply for charging all the time, it is suggested that switching on “ ” for battery life.
Page 62 RS35 Mobile Computer 2) Tap on the radio button to select “ ” or “ ”. Balance Mode Performance Mode Mode Description Balance between working hour and Balance Mode battery life. Better & extra 15% to 25% working Performance Mode hour performance, but might affect battery life.
Page 63 Status LED in the front panel blinks with a warning window popup to remind the user to disconnect the charger, and RS35 mobile computer will automatically suspend charging the battery. For battery life, please unplug the charger immediately and charge your RS35 mobile...
Page 64: Memory
64GB choosing an SD card for best compatibility and performance with RS35, please make sure of the capacity you need. For the use of SDXC card, please use a new card and make sure it has not been used in other host devices (computers, cameras, or readers).
Page 65 Using RS35 Mobile Computer 1) Go to , and swipe to the App Drawer (All Apps) Settings About Phone bottom to find “ ”. Build number 2) Tap on “ ” 7 times to enable it. During the process, you’ll see a prompt Build number with a countdown reading “Y...
Page 66 RS35 Mobile Computer 3) Once the prompt “ ” showing up, you have succeeded in You are now a developer! entering developer mode. You can find Developer option is now enabled in page. System...
Page 67 Using RS35 Mobile Computer CHECK MEMORY USAGE Go to App Drawer Settings System Developer option Memory enter memory manager screen. On the main screen, it tells you not only the used and free memory space of the RAM, but how your pattern of usage has impacted the device’s overall performance. To figure out how the system and apps have been taking up the memory over a longer period, tap the dropdown list to choose a different time span.
Page 68: Manage Storage Space
RS35 Mobile Computer To look at how individual apps are consuming the memory space, tap “ Memory used by ” to get a breakdown of memory usage by apps. apps Tap an application name to check its memory usage. This allows you to make sense of how much memory a newly-installed application can potentially consume your RAM.
Page 69 Using RS35 Mobile Computer ▪ SD Card as Portable Storage in Storage Settings Page The SD card is used for moving photos and other media between devices. ▪ SD card as internal storage in Storage Settings page The SD card is used for storing anything on this device only, including apps and photos.
Page 70 RS35 Mobile Computer SET UP SD CARD AS PORTABLE STORAGE Using SD card as a portable device allows you to treat it as a USB disk, by swapping it between your Android device and the computer to easily transfer files. This is quite handy when there is a need to offload files that are taking up too much storage space.
Page 71 Using RS35 Mobile Computer To start: 1) Insert the SD card. A notification icon indicating that an SD card is detected will be shown in the status bar; swipe down from the status bar and tap to set up. 2) Tap “...
Page 72 RS35 Mobile Computer 3) Swipe down from the status bar to reveal Notifications Drawer, and you will find a notification indicating that the SD card is for transferring photos and media; tap “ ” to check its content. EXPLORE tap the SD card in page to check it.
Page 73 Using RS35 Mobile Computer 2) You will find the disk content is readable from PC client. Please make sure the USB cable is properly connected while transferring files over USB connection. CONVERT THE SD CARD TO INTERNAL STORAGE You can always convert the SD Card from portable storage to internal storage. Before you start, make a backup of the files on this disk if you would like to keep them.
Page 74 RS35 Mobile Computer 2) By selecting “ ”, the device will Format as internal eventually format this SD card into a specific file format only readable by this device. 3) On “ ” popup, tap “ Format this SD card FORMAT SD ”...
Page 75 Using RS35 Mobile Computer SET UP SD CARD AS INTERNAL STORAGE Using SD card as internal storage allows you to extend your existing device storage and to store huge applications. This SD card will be reformatted and encrypted with a file format that is not readable by another device.
Page 76 RS35 Mobile Computer To start: 1) Insert the SD card. A notification will pop up indicating that an SD card is detected tap on “ ”. SET UP 2) Tap on “ ”. Phone storage 3) On the popup window, select “...
Page 77 Using RS35 Mobile Computer 4) You will then be asked to whether to move media files to this new SD card, tap to make your choice. 5) When the setting is completed, tap “ ”. DONE Note: It is recommended that you select “Move content” at Step 4 to have the device immediately start making use of SD card space.
Page 78 RS35 Mobile Computer 1) Enter the SD card content screen from screen by tapping on “ ”. Storage SD card 2) Tap and then “ ”. More Format as portable...
Page 79 Using RS35 Mobile Computer 3) Tap “ ” to have this SD card re-formatted into a file type accessible by other FORMAT devices. 4) When the formatting is completed, tap “ ”. DONE Note: Please do back up important files on this SD card before proceeding formatting.
Page 80: Touch Screen
RS35 Mobile Computer 2.3. TOUCH SCREEN The mobile computer comes with a 5.5-inch, transmissive IPS LCD, Corning ® Gorilla ® Glass 3 display with 720x1440 HD resolution. The LED backlight of the screen, which helps ease reading under dim environments, can be controlled manually and automatically.
Page 81: Screen Rotation
Using RS35 Mobile Computer 2.3.2. SCREEN ROTATION By default, the device automatically rotates the screen to when you turn the device sideways. To switch this function on or off: 1) Go to App Drawer (All Apps) Settings Display , and then tap on Advanced for more display settings.
Page 82 RS35 Mobile Computer Swipe down from the top of the screen to open Quick Settings Panel Quick Settings and tap the icon to enable screen rotation. Menu Auto rotate Icon Description Auto rotate mode is OFF. Auto rotate mode is ON.
Page 83 Using RS35 Mobile Computer You can enter “ ” page to enable or disable screen rotation by long pressing the Display Auto icon on rotate Quick Settings Panel Quick Settings Menu HOME SCREEN ROTATION To enable Home screen rotation, please make sure is enable.
Page 84 RS35 Mobile Computer REMOVE AUTO ROTATION FROM QUICK SETTING MENU You can remove the switch icon on to minimize the Auto rotate Quick Settings Menu possibility of accidentally turning on the auto-rotation function: 1) Swipe down from the top of the...
Page 85 Using RS35 Mobile Computer 3) Return Quick Settings , the switch icon Menu Auto rotate is now hidden. REMOVE AUTO ROTATION FROM DISPLAY SETTINGS , switch off App Drawer (All Apps) Settings Accessibility Auto rotate . By doing so, the auto-rotation option will be hidden in...
Page 86 RS35 Mobile Computer ▪ Switch off “Auto-rotate screen” on “Accessibility” page. ▪ Now the function “Auto-rotate screen” is hidden on “Display” page. Note: Auto-rotation is not supported for certain applications. Without enabling “Allow Home Screen Rotation”, auto-rotation is inapplicable in Home Screen and App Drawer screen.
Page 87: Screen Timeout Settings
Using RS35 Mobile Computer 2.3.3. SCREEN TIMEOUT SETTINGS Go to App Drawer (All Apps) Settings Display Screen timeout Select the time lapse for screen timeout.
Page 88: Text Size & Display Size
RS35 Mobile Computer 2.3.4. TEXT SIZE & DISPLAY SIZE Go to App Drawer (All Apps) Settings Display Font size Tap the small A icon or the large A icon to select the font size between Small Default Large Largest Go to...
Page 89: Notifications
Using RS35 Mobile Computer 2.4. NOTIFICATIONS 2.4.1. STATUS LED Two LED indicators located above the touch screen provide information about charging status, scanner light beam, and scanner " " during data collection. Good Read LED 1 for Power Indication Indicator...
Page 90: Sounds And Vibration
RS35 Mobile Computer 2.4.3. SOUNDS AND VIBRATION The mobile computer is integrated with a vibrator, which is software programmable for tactile feedback. This can be helpful when working in noisy environments. You may also set the mobile computer to vibrate only, in which all system sounds will be muted and replaced by the vibrator.
Page 91 Using RS35 Mobile Computer The media volume can be adjusted by pressing the key, or Volume Up Volume Down dragging the slider on quick sound menu. Tap on the settings icon will open the pop- up volume panel; tap on “...
Page 92 RS35 Mobile Computer On “ ” settings page, you can: Sound ▪ Adjust the volume for , and by dragging the media call ring alarm sliders. ▪ The media icon turns to be if media volume is off. ▪ The ring icons turns from...
Page 93 Using RS35 Mobile Computer ▪ Set the shortcut to prevent ringing. ▪ Select the sound for “ ”, “ ” and “ Phone Ringtine Default notification soud Default alarm ”. sound...
Page 94 RS35 Mobile Computer ▪ Turn on or off the switch of the items under “ OTHER ”. SOUNDS AND VIBRATIONS DISABLE UNWANTED NOTIFICATIONS WITH “DO NOT DISTURB” You can temporarily disable specific notifications (vibration or sound) using “ Do Not ”...
Page 95 Using RS35 Mobile Computer Swipe down from the status bar to open , tap Quick Settings Panel Quick Settings Menu on “ ” to enable this feature and make further adjustment. Do not disturb Icon Description DND mode is OFF.
Page 96 RS35 Mobile Computer Go to App Drawer (All Apps) Settings Sound Do Not Disturb...
Page 97: Date And Time
Using RS35 Mobile Computer 2.5. DATE AND TIME By default, the mobile computer automatically synchronizes the date and time to the WWAN network (if connected). To set the date and time manually: 1) Go to App Drawer (All Apps) Settings System Date &...
Page 98 RS35 Mobile Computer 3) Tap to select the correct month, date and year. Tap to save. Date 4) Tap to set the correct time. Tap to save. Time...
Page 99 Using RS35 Mobile Computer 5) Disable and then tap to select the correct Use network-provided time zone Time zone time zone from the list.
Page 100 RS35 Mobile Computer 6) Disable “ ” and tap “ ” to switch on or off to Use locale default Use 24-hour format change the displayed time. 7) Tap “ ” to input NTP server NTP Server address and tap...
Page 101: Language & Keyboard Input
Using RS35 Mobile Computer 2.6. LANGUAGE & KEYBOARD INPUT App Drawer (All Apps) Settings System Language & input change the system language, default keyboard type, and configure keyboard input and speech settings. 2.6.1. CHANGE DISPLAY LANGUAGE To change display language:...
Page 102 RS35 Mobile Computer 2) Click “ ” to select your desired system language. Add a language 3) Press and hold your desired system language to change its sorting order to the 1 dragging. Once it is released, the new language setting will immediately be applied.
Page 103 Using RS35 Mobile Computer DELETE LANGUAGE To delete language(s): 1) Tap on the more button and then select “ ” option. Remove 2) Select the language to delete. Please note that the display language will be changed once it is deleted.
Page 104 RS35 Mobile Computer 3) You have to leave at least one language.
Page 105: On-Screen Keyboard
Using RS35 Mobile Computer 2.6.2. ON-SCREEN KEYBOARD Tap a text input field to automatically open an on-screen keyboard. The virtual keyboard will vary depending on the data type (text or numbers) this field requires. SELECT KEYBOARD (INPUT METHOD) 1) Go to...
Page 106 RS35 Mobile Computer 2) On screen, manage the installed keyboards by tapping “ On-screen Keyboard Manage ” and switch on/off the input methods you need. on-screen keyboard EDIT TEXT Tap and hold text on the screen to enable a text editing menu for selecting all text, or copying and pasting text within or across applications.
Page 107: Sound And Volume
Using RS35 Mobile Computer 2.7. SOUND AND VOLUME Use the volume buttons on the left side of the mobile computer to adjust system and ringer volume. 2.8. DATA CAPTURE 2.8.1. BARCODE READER A selection of scan engines is available for delivering flexibility to meet different requirements.
Page 108: Basic Operation
Chapter 3 BASIC OPERATION This chapter describes the basic skills to work with the RS35 mobile computer, for instance how to operate the home screen, check system status and manage notifications. The add-on utilities for applications regarding data collection, processing, and transmission are introduced in the following chapters.
Page 109: Home Screen
Basic Operation 3.1. HOME SCREEN When the mobile computer is fully charged, press the Power key for three seconds to turn on the mobile computer. A locked screen will appear. LOCK SCREEN To enter the screen, you need to unlock the Lock screen. Home Simply swipe up from the bottom of the screen toward “unlock”...
Page 110: Application & Widget On Home Screen
RS35 Mobile Computer 3.1.1. APPLICATION & WIDGET ON HOME SCREEN ADD APPLICATION SHORTCUT TO HOME SCREEN To add an application to Home screen: 1) Open on the home screen you would like to customize. App Drawer (All Application) 2) Locate the application to add, tap and hold the application icon.
Page 111 Basic Operation ADD AN ACTION ICON FROM APP SHORTCUT TO HOME SCREEN To create an icon from the to Home screen, please: Action app shortcuts 1) Long press an application icon (no matter on the screen or the ) to Home App Drawer unfold its...
Page 112: Folder On Home Screen
RS35 Mobile Computer 3.1.2. FOLDER ON HOME SCREEN CREATE FOLDER 1) On the home screen you would like to customize, tap and hold the application shortcut you would like to move, drag the icon on the top of another icon to create a folder.
Page 113: Navigation Method
Basic Operation 3.2. NAVIGATION METHOD Navigation is to set how you control the device by using swipes and other actions or tapping on buttons. 3.2.1. CHANGE THE NAVIGATION METHOD The default navigation method is 3-button navigation which appears as the menu bar on the bottom of the screen.
Page 114 RS35 Mobile Computer The available options are: ▪ ▪ Gesture navigation 3-button navigation (default) GESTURE NAVIGATION “ ” is for navigating through the screens and menus by gesture-based Gesture navigation controls. Once is enabled, you can control the device screen by following the gestures:...
Page 115 Basic Operation Tap on the setting button to enter “ ” page to configure Gesture Settings “ ” which allow you to Gesture Settings set the distance of the inward swipe from the screen side edge to trigger “ ” gesture. The higher sensitivity Back you choose, the farther distance from the screen edge you have to go to.
Page 116: Recently Used Applications
RS35 Mobile Computer 3.2.2. RECENTLY USED APPLICATIONS To reveal the , you can: Recently Used Apps Menu ▪ For “ ”: Gesture navigation Swipe up from the bottom of the screen and then stop for few second before releasing your finger.
Page 117: Status Bar
Basic Operation 3.3. STATUS BAR The left side of the status bar shows notification icons, and the right side of the status bar shows status icons. 3.3.1. ICONS ON STATUS BAR STATUS ICONS Icon Description The device has been connected to a Bluetooth device. The device is currently connected to a Wi-Fi network and performing data transmission.
Page 118 RS35 Mobile Computer NOTIFICATION ICONS Icon Description Android System notification such as “USB debugging connected” or “USB file transfer turned on”. Open Notifications Drawer for more details. The device is performing data synchronization. There is an upcoming event. The device is downloading data. / Download completed.
Page 119: Open Quick Setting Menu
Basic Operation 3.3.2. OPEN QUICK SETTING MENU are related to essential settings regarding the device’s remaining power, status icons Bluetooth status or Wi-Fi connectivity status. The status bar offers a quick access for you to easily make adjustments of the settings. By short swipe from the status bar, will be revealed.
Page 120 RS35 Mobile Computer Tap on the two buttons, , on the bottom side of the Quick Setting Menu will respectively enter the below pages: ▪ Quick Setting Menu Edit Page: ▪ “Settings” Page:...
Page 121 Basic Operation EDIT QUICK SETTING MENU To customize , please: Quick Setting Menu 1) Click “ ” to get into EDIT Edit page. : To remove certain item, please tap on and hold the icon to be removed, and Remove drag it to the “...
Page 122 RS35 Mobile Computer : To add certain item, please tap on and hold the icon to be added and drag it to the upper area and then release it. 4) Return to the , all the settings are done. Quick Settings Menu...
Page 123 Basic Operation RESET QUICK SETTING MENU To reset the , please: Quick Setting Menu 1) Tap “ ” to enter EDIT Edit page. 2) Tap icon in the upper-right corner, and tap “ ”. More Reset...
Page 124: Open Notifications Drawer
RS35 Mobile Computer 3.3.3. OPEN NOTIFICATIONS DRAWER on status bar inform you of the new events such as incoming notifications icons calls, messages or USB connection. CHECK OUT NOTIFICATION To check out details of the events, swipe down from the status bar to open...
Page 125 Basic Operation DISABLE NOTIFICATION You can turn off the notification of a specific app by tapping and holding on the notifications card until the corresponding app name reveals. Tap to choose “ ”, “ ”, or “ ” . Default Silent Turn off notifications 1) Go to...
Page 126 RS35 Mobile Computer 2) Tap to enter the “ ” page and tap “ ” to switch on or off “ App info Notifications Show ” and other settings. notifications CLEAR NOTIFICATION To dismiss all notifications at a time, please tap on “...
Page 127: Suspend & Lock
SUSPEND RS35 Press the power button to suspend the mobile computer. The mobile computer will...
Page 128: Lock Device
RS35 Mobile Computer 3.4.2. LOCK DEVICE Setting a screen lock allows you to protect your personal data on this device while the device is not at your hand. With various types of screen lock available and Smart Lock, you can not only enjoy the benefits of this function but also great convenience.
Page 129 Basic Operation By selecting a , or method, a setting icon appears next to “ Pattern Password Screen ”. Tap to enter “ ” page for further configurations. lock Screen lock advanced settings are: Screen Lock Item Description Set the time interval between screen timeout and automatically Lock after screen timeout...
Page 130 RS35 Mobile Computer You can also access to customize personal lock settings. Smart Lock...
Page 131: Os Update
Basic Operation 3.5. OS UPDATE Updating the operating system on the mobile computer helps maintain it at an optimized state. You may choose to update the system by establishing a wireless network connection to the Internet and downloading the update file from the OTA server. Note: The mobile computer will shut down during system update.
Page 132 AUTOMATIC UPDATE The automatic update feature of RS35 mobile computer is off by default, and you can change the setting by (Android Deployment Configurator) to turn it on.
Page 133: Sd Card Update
Basic Operation 3.5.2. SD CARD UPDATE RS35 mobile computer automatically searches the available update files in your mobile computer’s storage and then install it. Please obtain the latest system update image file, and then rename and copy the file as “...
Page 134: Back Up Your Data
RS35 Mobile Computer 3.6. BACK UP YOUR DATA With , you can have your personal data (Google Calendar settings, Google Backup contacts, Chrome browser data and Gmail settings) and certain system settings under your Google Account backed up (over network connection) on the cloud. This allows you...
Page 135 Basic Operation Note: (1) To back up your photos and videos, tap Photos App Drawer and log in your Google Account to sync the files on your device with Google Photo Library. (2) To back up other data such as audio or video files on the device’s storage, you can make use of the Google Drive service.
Page 136: Reset To Factory Default
It is strongly recommended that following the instructions in to back up Back Up Your Data important data before performing a factory reset. When setting your RS35 mobile computer by , the ADC (Android Deployment Configurator) settings will automatically backup to “...
Page 137 Erase all data (factory reset) 3) Confirm the action by tapping on the button “ ” and input the verification Erase all data code (Please contact with to obtain your verification code). support@cipherlab.com.tw Finally, tap to perform a factory reset.
Page 138: Erase All Date (Factory Reset With Enterprise)
RS35 Mobile Computer 3.7.2. ERASE ALL DATE (FACTORY RESET WITH ENTERPRISE) Go to App Drawer (All Apps) Settings System Reset options Erase all data (factory reset with enterprise) Confirm the action by tapping on the button “ ” and input the verification code...
Page 139: Welcome Wizard
Basic Operation 3.7.3. WELCOME WIZARD As the mobile computer boots up for the first time after the reset, the Welcome wizard will run you through setting up the environment as well as restoring apps and data. During setup, you can tap to continue to the next step (you can finish the respective settings SKIP at any time).
Page 140 RS35 Mobile Computer ▪ Step 1-3 Select your system language. ▪ Step 2 Press the trigger to scan the settings barcode generated by ADC (Android Deployment Configurator) to deploy the settings, or tap on “Next” to continue setting up by Welcome Wizard.
Page 141 Basic Operation ▪ Step 3 Insert your SIM to connect to mobile network, or tap on “SKIP” to the next step. ▪ Step 4 Select a Wi-Fi network to log in or tap on “Set up offline” and confirm with “CONTINUE” to the next step.
Page 142 RS35 Mobile Computer ▪ Step 5 Set date and time, or merely skip this step by tapping “NEXT”. ▪ Step 6 Choose Google services that you want to be enabled, and tap “ACCEPT” to proceed.
Page 143 Basic Operation ▪ Step 7 Set up the protection methods to protect this device, or merely “SKIP” this step. ▪ Step It takes few seconds to complete the settings. Once the initial setup is completed, the app screen shows up. Apps and settings Home will be restored in the background.
Page 144: Wireless Radios
RS35 Mobile Computer Chapter 4 WIRELESS RADIOS The Wi-Fi module integrated on the mobile computer lets you configure and connect to network wirelessly. IN THIS CHAPTER 4.1 Use Wireless Local Area Network (Wi-Fi) ......143 4.2 Use Bluetooth ................. 155...
Page 145: Use Wireless Local Area Network (Wi-Fi)
Wireless Radios 4.1. USE WIRELESS LOCAL AREA NETWORK (WI-FI) 4.1.1. CONNECT TO WI-FI NETWORK To power on Wi-Fi: 1) Go to App Drawer Settings Network & internet Wi-Fi 2) Tap the Wi-Fi switch to scan for available networks.
Page 146 RS35 Mobile Computer 3) Select a network to connect. If the network is an open one, the mobile computer will attempt to connect to it directly. When connected, the status will change to show “ ”. Connected If the network is a secured one, you need to enter the password for the connection.
Page 147: Manually Add Wi-Fi Network
Wireless Radios 4.1.2. MANUALLY ADD WI-FI NETWORK If the network you would like to connect to does not broadcast its SSID, or if the network is out of range, you may add it manually. 1) Go to App Drawer Settings Network &...
Page 148 RS35 Mobile Computer 3) Scroll down to the bottom of the page, and select “ ”. Add network 4) On “ ” page, enter the name of the network in the field, Add network Network name and select a security method.
Page 149 Wireless Radios Note: Certificates may be installed under: App Drawer | Settings | Network & internet | Wi-Fi | Wi-Fi preferences | Advanced | Install certificates. The mobile computer supports the following certificate file extensions: File Extension Type Standard Certificate Key Stored Description DER-encoded X.509...
Page 150: Wi-Fi Preference
RS35 Mobile Computer 4.1.3. WI-FI PREFERENCE To access Wi-Fi Preference 1) Go to App Drawer (All Apps) Settings Network & internet Wi-Fi 2) Scroll down to the bottom of the page to find “ ” and enter it. Wi-Fi preferences 3) Tap “...
Page 151 The available settings are as below: Item Description Tap to enter the page for further settings. Please refer to Cipherlab Proprietary Settings Cipherlab Proprietary Settings for details. Even you’ve turned off Wi-Fi, the device will automatically turn Turn on Wi-Fi automatically on your Wi-Fi connection when there’s the saved network with...
Page 152 RS35 Mobile Computer CIPHERLAB PROPRIETARY SETTINGS To configure the grayed out options listed on “ ”, Wi-Fi must Cipherlab Proprietary Settings be turned off. Turn on Wi-Fi again to apply the setting(s) once the configuration is done. Please tap on the switch to turn Wi-Fi on or off.
Page 153 Confirm whether the gateway or DNS server can be IpReachability Monitor unreachable. Select the Wi-Fi channel(s) to narrow down frequency band Channel Selection of the 2.4GHz (802.11b/g/n) or 5 GHz (802.11a/n). Reset to Default Restore all the settings in “Cipherlab Propruetary” to default.
Page 154: Modify Wi-Fi Network
RS35 Mobile Computer 4.1.4. MODIFY WI-FI NETWORK MODIFY THE CONNECTED NETWORK To change the settings for a connected network: 1) Tap a connected network in the Wi-Fi hotspot list to enter its “ ” page. Network details 2) Tap button...
Page 155 Wireless Radios MODIFY THE SAVED NETWORK To change the settings for a saved network: 1) Tap and hold a saved network in the Wi-Fi hotspot list. 2) Tap in the pop-up menu. Modify 3) In the dialog box that opens, modify the network settings, and tap Save...
Page 156: Disconnect Wi-Fi Network
RS35 Mobile Computer 4.1.5. DISCONNECT WI-FI NETWORK To disconnect a connected network: 1) Tap a connected network in the Wi-Fi hotspot list to enter its “ ” page. Network details 2) Tap FORGET DISCONNECT disconnect. To forget a saved network: 1) Tap and hold a connected network in the Wi-Fi hotspot list.
Page 157: Use Bluetooth
Wireless Radios 4.2. USE BLUETOOTH The RS35 mobile computer lets you configure Bluetooth settings and manage Bluetooth services provided on remote devices. 4.2.1. BLUETOOTH PROFILES Bluetooth Profiles Supported Generic Access Profile (GAP) For device discovery and authentication. Service Discovery Access Profile (SDAP) Discovers services on remote devices.
Page 158 RS35 Mobile Computer Bluetooth Profiles Supported General Audio/Video Distribution (GAVDP) Provides a basis for A2DP and VDP. Profile Transfers Phone Book Objects to a car kit to display the Phone Book Access Profile (PBAP) information of an incoming call received on the mobile computer, or initiate a call.
Page 159: Turn On Bluetooth
Wireless Radios 4.2.2. TURN ON BLUETOOTH Bluetooth is turned off by default, and you can turn it on or off by tapping the Bluetooth icon Quick Settings Menu Quick Settings Panel Icon Description Bluetooth is OFF. Bluetooth is ON.
Page 160 RS35 Mobile Computer To enter “ ” page for further Bluetooth settings, please long press the Connected devices Bluetooth icon Quick Settings Menu Quick Settings Panel 1) Go to App Drawer (All Application) Settings Connected devices Connection preferences Bluetooth...
Page 161 Wireless Radios 2) Tap the switch to turn on this function while enabling the Bluetooth visibility of this device. Note: Having been turned on, Bluetooth is active even when the mobile computer is suspended. However, if the power mode is switched to Airplane Mode, Bluetooth power will be turned off regardless of the settings.
Page 162: Change Bluetooth Name
RS35 Mobile Computer 4.2.3. CHANGE BLUETOOTH NAME To change the Bluetooth name of this mobile computer: 1) Go to App Drawer (All Application) Settings Connected devices Connection preferences Bluetooth 2) Tap “ ” and the pop-up window “ ” shows up.
Page 163: Pair Bluetooth Devices
Wireless Radios 4.2.4. PAIR BLUETOOTH DEVICES 1) Go to App Drawer Settings Connected devices Connection preferences Bluetooth Tap the switch to to scan for available Bluetooth devices nearby. Scroll through the list and tap the device you would like to pair. 2) The window opens.
Page 164 RS35 Mobile Computer 3) Once pairing is done, you can find the Bluetooth device in App Drawer Settings Connected devices Previously connected devices Note: If the device you would like to pair with is not listed, make sure Bluetooth visibility is enabled on the...
Page 165: Unpair Bluetooth Device
Wireless Radios 4.2.5. UNPAIR BLUETOOTH DEVICE To unpair a paired device: 1) In the list, tap the settings button next to the paired Previously connected devices device. 2) On the screen, tap Device details FORGET...
Page 166: Use Near Field Communications
RS35 Mobile Computer 4.3. USE NEAR FIELD COMMUNICATIONS Near field communications (NFC) uses close proximity (4 cm or less) to establish radio communication through electromagnetic fields. With NFC enabled, the mobile computer can collect information from NFC tags, exchange information with other NFC supported devices, and even change information on the NFC tag if authorized.
Page 167: Pair With Nfc Enabled Bluetooth Devices
Wireless Radios 4.3.1. PAIR WITH NFC ENABLED BLUETOOTH DEVICES 1) On the device you would like to pair with, make sure NFC is enabled and Bluetooth discovery is enabled. 2) Hold the mobile computer without covering the antenna area. NFC Detection Area 3) Move the mobile computer in proximity with the device for pairing.
Page 168: Communication With Nfc
RS35 Mobile Computer 4.3.2. COMMUNICATION WITH NFC 1) On the mobile computer, launch an NFC enabled application. 2) Hold the mobile computer without covering the antenna area. 3) Place the mobile computer close to the NFC tag or device until the application...
Page 169: Using The Phone
Using the Phone Chapter 5 USING THE PHONE The RS35 mobile computer allows making phone calls and connecting to the network over (WCDMA). Insert the SIM card before Wideband Code Division Multiple Access turning on the power. Refer to Installing SIM Card, SAM Card, and Memory Card Note: SIM card slots are optional.
Page 170: Sim Card Management
RS35 Mobile Computer 5.1. SIM CARD MANAGEMENT The default setting for celluar networks is “ ”. To manually Automatically select network select the cellular network, please: 1) Go to App Drawer Settings Network & Internet Mobile Network 2) On the mobile network page, scroll to find “...
Page 171 Using the Phone 3) By turning off “ ”, “ ” pops up to list the Automatically select network Available networks network after searching. Select your preferred network from the list. 4) A notification appears if the selected network is unavailable. Please repeat the aforesaid steps to select the network again.
Page 172 RS35 Mobile Computer Note: SIM card slots are optional. EMERGENCY CALLS Depending on your service provider, the mobile computer might support making emergency phone call when the SIM card is locked, or even when no SIM card is inserted. Emergency phone numbers will vary by country.
Page 173: Phone Application
Using the Phone 5.2. PHONE APPLICATION When a SIM card is installed on the mobile computer, a signal icon appears on the bottom of the Quick Settings Menu to indicate the signal strength of the connection.
Page 174: Phone Interface
RS35 Mobile Computer 5.2.1. PHONE INTERFACE To launch the phone application, please go to App Drawer (All Apps) Phone The application “ ” contains 3 tab pages: Phone Item Description Favorite Display your favorite contacts & your frequent calls. History List all the call history.
Page 175 Using the Phone ADD FAVORITE CONTACTS Your favorite contacts are displayed on “ ” tab pages for quickly making Favorite phone calls. To add a favorite contact: 1) On “ ” tab page, tap on the contact you Contacts would like to set to be your favorite to enter the contact detail page.
Page 176 RS35 Mobile Computer 3) Return to “ ” tab pages, the contact you just marked as favorite is now Favorite displayed on “ ” tab pages. Favorite...
Page 177: Place Call
Using the Phone 5.2.2. PLACE CALL to expand the dial pad, enter the phone number in the dial pad, and tap to initiate the call. If you need to frequently make calls to an interactive voice system, you may tap next to the number and select for soft pause (a pause of 2 seconds to Add 2-sec pause...
Page 178: During A Call
RS35 Mobile Computer 5.2.3. DURING A CALL When a call is connected, the phone keypad features the following buttons: Button Description Mute Mute the call. Keypad Open the numeric keypad. Speaker Turn on the speaker. Add call Add another person to the call.
Page 179: Receive Incoming Call
Using the Phone 5.2.4. RECEIVE INCOMING CALL When a call is incoming on the mobile computer, tap “ ” to pick it up. Answer Incoming calls will be logged in the application; in the case of a missed call, a Phone notification will be displayed.
Page 180: Check Missed Calls
RS35 Mobile Computer 5.2.5. CHECK MISSED CALLS If you have a missed call, a notification icon will appear on the status bar. The missed calls notification will also be displayed on the lock screen. (Turning on/off this function on App Drawer (All Apps) Settings Apps &...
Page 181: Call History
Using the Phone 5.2.6. CALL HISTORY To check the call history: On the Phone application, tap to enter tab page where a list of history calls Recents is displayed. Tap on the more button and then Call history Item Description Connected calls.
Page 182: Call Settings
RS35 Mobile Computer 5.2.7. CALL SETTINGS Tap on more button and select “ ” to enter the settings page: Settings Tap on each setting for more setting options.
Page 183: Make Multi-Party Calls
Using the Phone 5.2.8. MAKE MULTI-PARTY CALLS To make multi-party conference calls: 1) On the Phone application page, enter the 1 number to call and tap initiate the call. 2) After the call has begun, tap to add another member. The 1 call will be Add call put on hold.
Page 184: Audio Modes
Bluetooth headset is connected. USE WIRED HEADSET The RS35 mobile computer supports USB Type-C audio adapter for connecting headsets. Please insert a USB Type-C audio adapter into the USB-C port and then connect with a...
Page 185: In-Call Volume
Using the Phone 5.4. IN-CALL VOLUME Use the Volume Buttons to adjust the ringer volume and system sound level. When in the middle of a call, use the volume buttons to adjust in-call conversation volume.
Page 186: Cipherlab Utilities
RS35 Mobile Computer Chapter 6 CIPHERLAB UTILITIES This chapter gives the introduction about the built-in applications developed by CipherLab. IN THIS CHAPTER 6.1 A-Demo ................. 185 6.2 AppLock ................187 6.3 Barcode To Setting ............... 188 6.4 BT Printer Mate ..............194 6.5 Button Assignment ...............
Page 187: A-Demo
CipherLab Utilities 6.1. A-DEMO “ ” is an application which gives the brief introduction about all the built-in A-Demo applications developed by CipherLab. Enter the main screen and swipe left or right to select the item to get the function introduction.
Page 188 RS35 Mobile Computer Users can launch those apps by tapping “ ” on the app’s introduction page. START...
Page 189: Applock
CipherLab Utilities 6.2. APPLOCK controls the interface provided to users. It dominates over the O.S. and AppLock limits the system resources made available to users. Properly tuned, AppLock gives way to ordinary working applications while locking out those that are not so productive.
Page 190: Barcode To Setting
RS35 Mobile Computer 6.3. BARCODE TO SETTING “ ” is to read the setting barcodes generated by (Android BarcodeToSetting Deployment Configurator) to apply the configuration. Launch “ ” and the BarcodeToSetting main screen shows as below: Item Description Total The total amount of the barcodes to be scanned.
Page 191 CipherLab Utilities The setting barcode(s) you generated by ADC might be 1D or 2D as the example figures shows: ▪ 1D barcodes: ▪ 2D barcode:...
Page 192 RS35 Mobile Computer HOW TO APPLY THE SETTINGS BY SCANNING BARCODE(S) Simply aim the scanning window at the barcode to read and press any of the side trigger. The scanning light beams to read the printed barcodes. It takes few seconds for your device to apply the configuration after scanning the setting...
Page 193 CipherLab Utilities Configuration is complete. CLEAR DATA You may carry out “ ” during the scanning procedure (before it starts to apply CLEAR DATA the configuration) to start over. Or you may tap on “ ” button after CLEAR DATA completing configuration so that you can scan other barcodes you generated to apply other settings.
Page 194 RS35 Mobile Computer EXIT Tap on the button “ ” to quit “ ”. EXIT BarcodeToSetting MORE MENU Tap on the more button on the action bar to ope the more menu.
Page 195 CipherLab Utilities The items on the more menu are: Item Description Check the checkbox to enable recording of events that occurs during “BarcodeToSetting” runs. Show the current version of “BarcodeToSetting” and “Reader About Service”.
Page 196: Bt Printer Mate
RS35 Mobile Computer 6.4. BT PRINTER MATE is an application which provides user interface to pair with BT Printer Mate Bluetooth printers.
Page 197: Button Assignment
CipherLab Utilities 6.5. BUTTON ASSIGNMENT can redefine the functions of physical keys so that they trigger utton Assignment different actions. Settings made to one or more keys can be saved as a profile, allowing users to switch conveniently in between different sets of settings.
Page 198: Enterprise Settings
RS35 Mobile Computer 6.6. ENTERPRISE SETTINGS in RS35 mobile computer offers “ ” settings of RS35 Enterprise Settings Doze Mode mobile computer. DOZE MODE “ ” is enabled by default. Doze Mode Please refer to https://developer.android.com/training/monitoring-device-state/doze- for details. standby VERSION The version information about Enterprise Settings is listed right below “...
Page 199: Hf Rfid Configuration
CipherLab Utilities 6.7. HF RFID CONFIGURATION is a NFC application which is for reading and writing NFC HF RFID Configuration tags and RFID compatible chips by putting the NFC tag/ RFID chip close to the NFC detecting area of your device. User can control how the NFC reader works by settings in HF RFID Configuration and enabling it.
Page 200: Readerconfig
RS35 Mobile Computer 6.8. READERCONFIG , a built-in app for configuring the scan engine inside the mobile ReaderConfig computer, allows users to set their scanner preferences and the way to output decoded data. Symbology and scanner settings can be saved and exported as a profile for importing again or implementing identical Reader Config settings on multiple devices.
Page 201: Signature Capture
CipherLab Utilities 6.9. SIGNATURE CAPTURE is a simple and easy application which transforms your device Signature Capture into a signature pad for user to draw the signature. Users can create digital signatures and save them in the device storage with multiple file formats.
Page 202: Sip Controller
RS35 Mobile Computer 6.10. SIP CONTROLLER , a built-in application for quickly open or close virtual keyboard by SIP Controller tapping on the floating button. LAUNCH SIP CONTROLLER To launch SIP Controller: 1) Go to and tap on the app “...
Page 203 CipherLab Utilities 3) Now the “ ” button appears on screen, and you can invoke the SIP Controller virtual keyboard by tapping on it. You can drag this button to any position on the screen. Tap to invoke the keyboard.
Page 204 RS35 Mobile Computer FORCE TO DISPLAY “ ” is ineffective for the device whose OS is Android 11. Force to display SWITCH VIRTUAL KEYBOARD You can set “ ” and “ ” to be the keyboard invoked by Virtual Keyboard 1 Virtual Keyboard 2 .
Page 205 CipherLab Utilities EXIT SIP CONTROLLER Tap on “ ” to disable on-screen button. Stop SIP Controller Tap to quit “SIP Controller”. VERSION INFORMATION Tap on the more button on the action bar and select “ ” to check the current version...
Page 206: Software Trigger
RS35 Mobile Computer 6.11. SOFTWARE TRIGGER is an application running on mobile device. Serving as a real Software Trigger trigger key, it always floats on top of all other programs for convenient trigger control of the bardcode scanner; by tapping and holding this virtual button, the device will keep...
Page 207 CipherLab Utilities LAUNCH SOFTWARE TRIGGER Please follow the steps below to launch Software Trigger 1) Go to App Drawer (All Apps) tap on the app “ ” Software Trigger to enter the main screen. 2) Select the size of the virtual trigger button:...
Page 208 RS35 Mobile Computer 3) Tap “ ” to enable the button. You can check “ Start Auto start software trigger after ” to have this application automatically launch right after the device starts up. startup Tap on “Start” to enable the button.
Page 209 CipherLab Utilities EXIT SOFTWARE TRIGGER To disable this virtual trigger button, enter Software application screen, and tap “ ”. Trigger Stop Tap to quit “Software Trigger”. VERSION INFORMATION To check the current version of , please tap on the more button on the Software Trigger action bar and select “...
Page 210: Wmds Agent & Wmds Installer
RS35 Mobile Computer 6.12. WMDS AGENT & WMDS INSTALLER (Wireless Mobile Deployment System) for Android is a windows-based server WMDS program that can deploy the configuration projects (created by Android Deployment ) to Android devices through wireless network. Configurator The preloaded application “...
Page 211: Specifications
Specifications SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System & CPU OS Version Android 11 with CTS and GMS Certified Qualcomm SDM450 Octa-core 1.8GHz Memory 32GB eMMC (MLC) 3GB LPDDR3 Expansion Slot One Micro SDHC card slot (up to 32GB) SDXC supported (up to 64GB-2TB) Micro SIM socket x2 (optional), Micro SAM socket x1 (optional)
Page 212: Communication & Data Capture
RS35 Mobile Computer COMMUNICATION & DATA CAPTURE Communication USB Client USB Type-C 2.0 OTG and charging contact ® WPAN Bluetooth Class I, v4.0, v4.1, V4.2 V2.1+EDR (Enhanced Data Rate) (2402~2480 MHz: 7.16dBm) WLAN 802.11 a/b/g/n/ac/d/h/I/r/k/v (2412~2472 MHz: 18.33dBm 5180~5240MHz: 19.46dBm, 5260~5320MHz: 20.35dBm,...
Page 213 Specifications Data & Image Capture Digital Camera Autofocus 13 megapixels with LED flash Barcode Reader 2D imager HF RFID Reader Support Card emulation, Card reader, and P2P modes of operation; support ISO14443 Type A & B, ISO15693, and Felica NFC area should be located on the top-side (-19.83 dBuA/m at 10m)
Page 214: Electrical Characteristics
RS35 Mobile Computer ELECTRICAL CHARACTERISTICS Battery Main Battery Pack Rechargeable Li-polymer battery: 3.85V, 4000mAh Charging temperature: 0-40 Minimum charging time: 4 hours @25 For the first time charging the main battery, please charge it for at least 8 to 12 hours. The allowed battery charging ambient temperature is between 0 to 40 .
Page 215: Physical Characteristics
Specifications PHYSICAL CHARACTERISTICS Color Touch Screen Display Display 5.5 inch, Transmissive IPS LCD, sunlight visibility, Corning® Gorilla® Glass 3 Resolution 720 X 1440 Pixel Notifications Status LED 2 LEDs include one bi-color (green & red) LED for power indications, and one tri-color (blue, green, & red) LED for reader and system notification.
Page 216: Environmental Characteristics
RS35 Mobile Computer ENVIRONMENTAL CHARACTERISTICS Temperature Operating to 50 Storage to 70 Charging to 40 Humidity Operating 10% to 90% (non-condensing) Storage 5% to 95% (non-condensing) Resistance Impact Resistance 1.5m(5ft.) multiple drops onto concrete, 6 faces drop 6 cycles; with protective boot: 1.8m (6ft.) multiple drops onto concrete, 6 drops...
Page 217: Programming Support
Specifications PROGRAMMING SUPPORT Development Environment & Tools JAVA Environment Android studio Software Development Kit: JAR Environment: Visual Studio Software Development Kit: DLL (Xamarin Library)
Page 218: Application Menu
SD card. An Android built-in application for a file storage and Drive synchronization service created by Google. A one-to-one video call application developed by Google. Enterprise Settings An application for “Doze Mode” settings of RS35 mobile computer.
Page 219 Appendix I Icon Name Description File Browses and manages files on the local storage and storage card. An Android built-in application for Gmail, a free email service Gmail provided by Google. An Android built-in application providing you easy access to handy Google services provided by Google such as searching for nearby restaurants or updates on traffic alerts.
Page 220 RS35 Mobile Computer Icon Name Description Wireless Mobile Deployment System for Android is a windows- based server program that can deploy the configuration projects WMDSAgent (created by Android Deployment Configurator) to Android devices through wireless network. The WMDSInstaller will fetch the latest WMDS Agent version over WMDSInstaller the Internet and then perform auto-installation.
Page 221: Open Source License
Appendix II APPENDIX II OPEN SOURCE LICENSE The Reader Config involves the android-serialport-api project of Apache License Version 2.0, January 2004. http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
Page 222 RS35 Mobile Computer "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner.
Page 223 Appendix II d. If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works;...
Page 224 RS35 Mobile Computer 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be...

CipherLab RS35 Reference Manual

Quick Links

Need help?

Questions and answers

Related Manuals for CipherLab RS35

Summary of Contents for CipherLab RS35

Table of Contents