This chapter explains an outline of the EP-784915GF-R.
1.1 Operating Environment
The EP-784915GF-R is a probe set to connect the IE-784915-R-EM1 with the target system.
Connection by means of the EP-784915GF-R prepares a debugging environment for the microcontroller and allows
you to perform integrated debugging of hardware and software of the target system using the µ PD784915 subseries,
µ PD784928 subseries, and µ PD784928Y subseries.
It can be made compatible with any product in the µ PD784915 subseries, µ PD784928 subseries, or µ PD784928Y
subseries just by changing the chip set board.
For the specific connection method, see CHAPTER 2 CONNECTION.
Figure 1-1. Connection of IE-784000-R and Target System
In-circuit emulator
IE-784000-R
IE-784000-R-EM
IE-784915-R-EM1
1.2 Configuration
The EP-784915GF-R consists of the following three parts.
• Cables
• Chip set board
• Dummy board (LCC type or QFP type can be selected)
Caution The EP-784915GF-R does not come with the chip set board. Use the one provided for the EP-
784915-R-EM1.
CHAPTER 1 GENERAL DESCRIPTION
Emulation probe
EP-784915GF-R
Conversion socket
EV-9200GF-R
or
+
NQPACK100RB
Target system
43