Dürr Technik SICOLAB 062 mini Installation And Operating Instructions Manual page 23

8.2 Preparations when replacing
a filter
The following steps need to be carried out
before any maintenance work can be per-
formed on the unit:
Allow the unit to cool down.
❯
Switch off the unit.
❯
Disconnect the mains plug and prevent the unit
❯
from being switched back on again.
Evacuate the unit using e.g. a compressed air
❯
pistol (accessory) connected to the quick-
release coupling until the pressure gauge dis-
plays 0 bar.
Open the lock on the unit cover.
❯
Lift up the unit cover.
❯
11 Unit cover
12 Unit cover lock
0715100100L02 2111V005
8.3 Replace the air intake filter
cartridge
Pull off the noise reducer from the air intake fil-
❯
ter.
4 Air intake filter
18 Silencer
Pull the air intake filter cartridge out of the air
❯
intake filter.
12
11
4a Air intake filter cartridge
Insert a new air intake filter cartridge and push
❯
it into the air intake filter.
Push the noise reducer onto the air intake filter
❯
and close the cover of the unit.
4
18
4a
Usage
EN
21