Centa CENTAX-G Assembly And Operating Instructions Manual page 21

Assembly and operating instructions
Material damage to coupling components can occur as a result
of:

This type of screw locking medium may not be in contact with rubber
parts.
 Screw preparation and tightening torque levels in accordance with
CENTA data sheet D013-013 (see chapter 11.1).
 Use suitable lifting devices for assembly.
 The following assembly stages are described for coupling 020G-00070-F.10.
 Part illustration and marking may differ slightly from installation drawing and
delivery state.
CENTA Antriebe Kirschey GmbH
CENTAX-G
020G-00050...00090-F.10
CAUTION
Anaerobic adhesives (e.g. Loctite) used for screw locking
IMPORTANT
M020-00009-EN
Rev. 4
21 / 52