Advertisement
8
P E D E S TA L F O R T E R R A A C WA L L B O X
—
Anchoring to the base
The 4x anchors (M10x40) must be used for
anchoring.
—
Technical data
Anchorage ground
Recommended load
Per anchor
Required clearance
Max.Torque Tinst
Drill-hole diameter do
Drill-hole depth h1
Making drill holes
• Mark the 4 holes on the concrete foundation
using the base plate of the pedestal. Make sure
that the connection cable is located precisely
underneath the opening in the base plate.
• Drill the 4 mounting holes:
Diameter: 12 mm
Drill-hole minimum depth: 43 mm
• Hammer the anchors (not included) so that
they are flush with the floor.
Please also observe the following instructions:
Instructions on inserting the anchors
Standard concrete
with a strength class of
C30/C37 or greater
Tension N (uncracked
concrete)
Transversal shear V
4,9 kN
(uncracked concrete)
14,0 cm
≥15 Nm
12 mm
43 mm
M10
h1
4
d
0
I=h
l
g
T
inst
nom
Advertisement
